Page 79 of 115 FirstFirst ... 2969777879808189 ... LastLast
Results 781 to 790 of 1141

Thread: HOW TO Set Up the Bamboo Pen & Touch in Lucid

  1. #781
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    I followed the long guide regarding how to build "input-wacom" and looked at 2.6.36/wacom_wac.c and I note there were wacom_features_0xD1 through wacom_features_0xDB and 0xD5 is missing.
    I tried copying the parameters from device 0xD4 and the tablet seems to be working with its most basic functionalities. How lucky!
    Good!

    I looked at the linux-input mailing list and someone submitted the d5 already. But it is not in xf86-input-wacom yet. So we just need to add it to input-wacom and xf86-input-wacom for you.

    I found the specifications. Could you look on the back of your tablet for the model number? Is it: CTL-660/K? Or is it more than K or something other than K?

    You have a pen/stylus with 2 side buttons (rocker switch). Correct? No eraser or touch or tablet buttons?


    Edit: The specifications I have are:
    Levels of Pressure Sensitivity: 1024
    Resolution: 100 lines/mm (2540 lines/inch)
    Pen active area: 216.5 x 137.0 mm (8.53 x 5.4 inches)

    Do you agree?
    Last edited by Favux; September 5th, 2011 at 09:57 PM.

  2. #782
    Join Date
    Sep 2011
    Beans
    4

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Quote Originally Posted by Favux View Post
    Good!

    I looked at the linux-input mailing list and someone submitted the d5 already. But it is not in xf86-input-wacom yet. So we just need to add it to input-wacom and xf86-input-wacom for you.

    I found the specifications. Could you look on the back of your tablet for the model number? Is it: CTL-660/K? Or is it more than K or something other than K?
    Thank you (:
    Yes the model number is CTL-660/K

    Quote Originally Posted by Favux View Post
    You have a pen/stylus with 2 side buttons (rocker switch). Correct? No eraser or touch or tablet buttons?
    Correct, it's a pen/stylus with a 2-side-button rocker switch, no erasers and no touch and no tablet buttons.

    Quote Originally Posted by Favux View Post
    Edit: The specifications I have are:
    Levels of Pressure Sensitivity: 1024
    Resolution: 100 lines/mm (2540 lines/inch)
    Pen active area: 216.5 x 137.0 mm (8.53 x 5.4 inches)
    Yes the specs are all correct

  3. #783
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    OK, then this is what you want to do for the Wacom Bamboo Pen Medium CTL-660/K, hopefully.

    In input-wacom before compiling it go to wacom_wac.c file in the 2.6.36 folder and add these two lines:
    Code:
    static const struct wacom_features wacom_features_0xD5 =
    	{ "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN,     21650, 13700, 1023, 63, BAMBOO_PT };
    at about line #1401 like so:
    Code:
    static const struct wacom_features wacom_features_0xD4 =
    	{ "Wacom Bamboo Pen 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
    static const struct wacom_features wacom_features_0xD5 =
    	{ "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN,     21650, 13700, 1023, 63, BAMBOO_PT };
    static const struct wacom_features wacom_features_0xD6 =
    	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023, 63, BAMBOO_PT };
    Then add:
    Code:
    	{ USB_DEVICE_WACOM(0xD5) },
    to about line #1489:
    Code:
    	{ USB_DEVICE_WACOM(0xD4) },
    	{ USB_DEVICE_WACOM(0xD5) },
    	{ USB_DEVICE_WACOM(0xD6) },
    Then compile it.

    For xf86-input-wacom go the the file wcmUSB.c in xf86-input-wacom/src. Add the line:
    Code:
    	{ WACOM_VENDOR_ID, 0xD5, 100000, 100000, &usbBamboo     }, /* CTH-660/K */
    at about line #199 so it looks like:
    Code:
    	{ WACOM_VENDOR_ID, 0xD0, 100000, 100000, &usbBamboo     }, /* Bamboo Touch */
    	{ WACOM_VENDOR_ID, 0xD5, 100000, 100000, &usbBamboo     }, /* CTH-660/K */
    	{ WACOM_VENDOR_ID, 0xD6, 100000, 100000, &usbBamboo     }, /* CTH-460/K */
    Then go ahead and compile it too.

    Please let me know if and how it works for you.

  4. #784
    Join Date
    Sep 2011
    Beans
    4

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Quote Originally Posted by Favux View Post
    OK, then this is what you want to do for the Wacom Bamboo Pen Medium CTL-660/K, hopefully.
    (omitted)
    Please let me know if and how it works for you.
    Yes, this is working very well for me!
    Works instantly after plugging in the tablet!


    I have not found any problems so far; I think this is how it should work.
    Thanx!!
    Last edited by cs900601; September 6th, 2011 at 03:29 AM.

  5. #785
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Great!

    Let me know if there is a problem, like with calibration or anything.

  6. #786
    Join Date
    May 2009
    Beans
    95
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Hello! I have a problem. Purchased Bamboo One (Medium) recently:
    http://www.wacom.co.in/bamboo_in/bambooone/

    I tried the procedure, but no luck. So I put the Wacom Plus PPA instead, but still no luck. Ubuntu seems to detect it, but I can't move the cursor with he pen, nor can I click or anything. Please, help!

    Ubuntu 11.04 - Natty.

  7. #787
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Hi tushantin,

    The Bamboo Ones (6A & 6B) weren't added to xf86-input-wacom until 6-28-11 which I think is after 0.11.1 came out. So you need to clone the xf86-input-wacom git repository. Did you compile the 0.11.1 tar? They are in input-wacom-0.11.1 so its wacom.ko should be good.

    Wacom Plus PPA; link? That probably is too old unless recently updated. Depending on which PPA that is, it probably installed a dkms version of the wacom.ko, which will overwrite the input-wacom version if you try to install it now. So you'll need to remove it. It should be in Synaptic Package Manager. Uninstall it. You should see anything named wacom removed from /lib/modules/`uname -r`/updates/dkms/ if that works.

  8. #788
    Join Date
    May 2009
    Beans
    95
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    This PPA:
    http://sourceforge.net/apps/mediawik...86-input-wacom

    But as you asked, I removed it. I did not find the dkms, however, so I uninstalled xserver-wacom thingy (or something) and re-installed it via synapic. After that, I did the procedure all over again, including clone the GIT and stuff, I compiled them and... It still doesn't work.

    Help, please... As an artist, I get scared of the command line. But meh, as long as I can get the tablet working it should be worth it.

  9. #789
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Didn't see any error messages saying one of the compiles wasn't working?

    Let's see if the wacom.ko is autoloading. What's the output of?
    Code:
    dmesg | grep wacom

  10. #790
    Join Date
    May 2009
    Beans
    95
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO Set Up the Bamboo Pen & Touch in Lucid

    Nope! No error messages at all. Also, I hit that command in the terminal and apparently I got... nothing:
    http://i.imgur.com/xFfye.png

    Hmm, now what?

Page 79 of 115 FirstFirst ... 2969777879808189 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •