I have a ATI RS780D [Radeon HD 3300] onboard video card on my motherboard (MSI 790Gx-G65). I have a VGA display monitor and a TV connected via HDMI. When I use the opensource driver, the TV is detected perfectly. The problem with this driver is that it doesn't handle video well (videos tear or play choppily). So I want to try it with FGLRX, which should be a better specific driver for my card. However, it doesn't detect my TV at all. Instead, in 'Displays' it shows a second screen called 'Laptop', which doesn't work if I enable it.
My output from xrandr with the opensource driver is:
Code:
sommen@sommen:~$ xrandr
Screen 0: minimum 320 x 200, current 2646 x 1024, maximum 8192 x 8192
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0 72.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
640x350 70.1
HDMI-0 connected 1366x768+1280+179 (normal left inverted right x axis y axis) 640mm x 360mm
1920x1080 50.0 + 24.0
1920x1080i 25.0
1360x768 59.8*
1024x768 60.0
800x600 60.3
640x480 60.0
And the same with fglrx:
Code:
sommen@sommen:~$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1920 x 1920
DFP1 connected (normal left inverted right x axis y axis)
1920x1080 50.0 + 60.0 30.0 25.0 24.0
1776x1000 60.0 + 50.0 + 25.0 24.0
1680x1050 50.0 + 60.0 24.0
1400x1050 50.0 + 60.0 24.0
1280x1024 50.0 + 60.0 24.0
1440x900 50.0 + 59.9 24.0
1280x960 50.0 + 60.0 24.0
1280x800 50.0 + 60.0 24.0
1152x864 50.0 + 60.0 24.0
1280x768 50.0 + 59.9 24.0
1024x768 50.0 + 60.0 24.0
1152x648 60.0 + 50.0
1280x720 60.0 50.0 24.0
800x600 60.3 50.0 24.0
720x576 50.0 25.0
720x480 60.0 50.0 30.0 24.0
640x480 60.0 50.0 24.0
CRT1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x800 60.0 + 75.0
1280x720 60.0 +
1280x960 75.0 60.0
1152x864 75.0 60.0
1280x768 74.9 59.9
1024x768 75.0 70.1 60.0
800x600 72.2 75.0 70.0 60.3
720x480 60.0
640x480 75.0 72.8 60.0
As you see, with the fglrx driver, it detects a with dfp and crt, which isn't correct, and it doesn't detect the VGA or HDMI (My VGA monitor works fine however).
In Windows, this does work with the catalyst driver.
Any ideas? Thanks.
Bookmarks