Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] modified: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] modified: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] modified: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 2ed6a000 - 2f9f742e
[ 0.000000] ACPI: RSDP 000fb9d0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 03000905 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 03000905 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7a05b0 05E21 (v01 A1192 A1192000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 03000905 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 03000905 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 03000905 MSFT 00000097)
[ 0.000000] ACPI: HPET 3f7a63e0 00038 (v01 A_M_I_ OEMHPET 03000905 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002ed6a000 - 002f9f742e] RAMDISK ==> [002ed6a000 - 002f9f742e]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd1f8] BRK ==> [00008da000 - 00008dd1f8]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259887
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32418 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=837c0cc7-0c25-45e4-99c6-8a8c464d6f9d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5199680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7a0)
[ 0.000000] Memory: 1003928k/1040000k available (4673k kernel code, 35068k reserved, 2121k data, 656k init, 130696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.615 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.23 BogoMIPS (lpj=6650460)
[ 0.004046] Security Framework initialized
[ 0.004086] AppArmor: AppArmor initialized
[ 0.004102] Mount-cache hash table entries: 512
[ 0.004331] Initializing cgroup subsys ns
[ 0.004341] Initializing cgroup subsys cpuacct
[ 0.004351] Initializing cgroup subsys memory
[ 0.004364] Initializing cgroup subsys devices
[ 0.004370] Initializing cgroup subsys freezer
[ 0.004376] Initializing cgroup subsys net_cls
[ 0.004413] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004420] CPU: L2 cache: 512K
[ 0.004425] CPU: Physical Processor ID: 0
[ 0.004430] CPU: Processor Core ID: 0
[ 0.004437] mce: CPU supports 5 MCE banks
[ 0.004453] CPU0: Thermal monitoring enabled (TM2)
[ 0.004463] using mwait in idle threads.
[ 0.004474] Performance Events: Atom events, Intel PMU driver.
[ 0.004490] ... version: 3
[ 0.004494] ... bit width: 40
[ 0.004499] ... generic registers: 2
[ 0.004503] ... value mask: 000000ffffffffff
[ 0.004508] ... max period: 000000007fffffff
[ 0.004513] ... fixed-purpose events: 3
[ 0.004518] ... event mask: 0000000700000003
[ 0.004526] Checking 'hlt' instruction... OK.
[ 0.020009] Disabling 4MB page tables to avoid TLB bug
[ 0.024237] ACPI: Core revision 20090903
[ 0.040017] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040028] ftrace: allocating 21771 entries in 43 pages
[ 0.044106] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044505] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084322] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.172151] CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.172178] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176036] Brought up 2 CPUs
[ 0.176043] Total of 2 processors activated (6650.20 BogoMIPS).
[ 0.176283] CPU0 attaching sched-domain:
[ 0.176292] domain 0: span 0-1 level SIBLING
[ 0.176298] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.176310] domain 1: span 0-1 level MC
[ 0.176315] groups: 0-1 (cpu_power = 1178)
[ 0.176327] CPU1 attaching sched-domain:
[ 0.176331] domain 0: span 0-1 level SIBLING
[ 0.176336] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.176348] domain 1: span 0-1 level MC
[ 0.176352] groups: 0-1 (cpu_power = 1178)
[ 0.176576] devtmpfs: initialized
[ 0.176576] regulator: core version 0.5
[ 0.176576] Time: 20:44:18 Date: 05/19/10
[ 0.176576] NET: Registered protocol family 16
[ 0.176576] Trying to unpack rootfs image as initramfs...
[ 0.176576] EISA bus registered
[ 0.176576] ACPI: bus type pci registered
[ 0.176742] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.176750] PCI: Not using MMCONFIG.
[ 0.177070] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.177077] PCI: Using configuration type 1 for base access
[ 0.181997] bio: create slab <bio-0> at 0
[ 0.184588] ACPI: EC: Look up EC in DSDT
[ 0.187485] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.201026] ACPI: Interpreter enabled
[ 0.201050] ACPI: (supports S0 S3 S4 S5)
[ 0.201119] ACPI: Using IOAPIC for interrupt routing
[ 0.201248] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.206195] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.206206] PCI: Using MMCONFIG for extended config space
[ 0.222373] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.222899] ACPI: No dock devices found.
[ 0.223266] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.223450] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[ 0.223464] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
[ 0.223477] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.223491] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.223559] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[ 0.223721] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[ 0.223805] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.223816] pci 0000:00:1b.0: PME# disabled
[ 0.223942] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.223953] pci 0000:00:1c.0: PME# disabled
[ 0.224118] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.224129] pci 0000:00:1c.1: PME# disabled
[ 0.224263] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.224275] pci 0000:00:1c.3: PME# disabled
[ 0.224377] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[ 0.224471] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
[ 0.224564] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.224657] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[ 0.224756] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.224842] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.224852] pci 0000:00:1d.7: PME# disabled
[ 0.225080] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.225091] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.225102] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.225113] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.225123] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[ 0.225215] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.225230] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.225245] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.225259] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.225274] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.225324] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.225334] pci 0000:00:1f.2: PME# disabled
[ 0.225533] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.225551] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.225652] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.225663] pci 0000:03:00.0: PME# disabled
[ 0.225763] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.225774] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.225877] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[ 0.225990] pci 0000:01:00.0: supports D1
[ 0.225997] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.226009] pci 0000:01:00.0: PME# disabled
[ 0.226118] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.226133] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.226216] pci 0000:00:1e.0: transparent bridge
[ 0.226268] pci_bus 0000:00: on NUMA node 0
[ 0.226289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.227330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.227462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.258965] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.259294] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.259608] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.259922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.260291] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.260611] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.260931] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.261257] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.261589] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.261619] vgaarb: loaded
[ 0.261981] SCSI subsystem initialized
[ 0.262224] libata version 3.00 loaded.
[ 0.262458] usbcore: registered new interface driver usbfs
[ 0.262500] usbcore: registered new interface driver hub
[ 0.262579] usbcore: registered new device driver usb
[ 0.263021] ACPI: WMI: Mapper loaded
[ 0.263028] PCI: Using ACPI for IRQ routing
[ 0.263466] NetLabel: Initializing
[ 0.263473] NetLabel: domain hash size = 128
[ 0.263478] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.263511] NetLabel: unlabeled traffic allowed by default
[ 0.263632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.263648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.268552] Switching to clocksource tsc
[ 0.272740] AppArmor: AppArmor Filesystem Enabled
[ 0.272782] pnp: PnP ACPI init
[ 0.272822] ACPI: bus type pnp registered
[ 0.278035] pnp: PnP ACPI: found 13 devices
[ 0.278046] ACPI: ACPI bus type pnp unregistered
[ 0.278056] PnPBIOS: Disabled by ACPI PNP
[ 0.278095] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.278124] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.278133] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.278143] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.278152] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.278161] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.278171] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.278181] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
[ 0.278191] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.278201] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.278211] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.278221] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.278231] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.278252] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.278262] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.278282] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.278302] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.278313] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.278323] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.278335] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.313552] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.313564] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.313577] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.313589] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.313605] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.313614] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.313626] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.313638] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.313653] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.313662] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
[ 0.313675] pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
[ 0.313686] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.313701] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.313708] pci 0000:00:1e.0: IO window: disabled
[ 0.313719] pci 0000:00:1e.0: MEM window: disabled
[ 0.313728] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.313757] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.313774] alloc irq_desc for 16 on node -1
[ 0.313781] alloc kstat_irqs on node -1
[ 0.313798] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.313811] pci 0000:00:1c.0: setting latency timer to 64
[ 0.313846] alloc irq_desc for 17 on node -1
[ 0.313852] alloc kstat_irqs on node -1
[ 0.313863] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.313875] pci 0000:00:1c.1: setting latency timer to 64
[ 0.313893] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[ 0.313903] alloc irq_desc for 19 on node -1
[ 0.313909] alloc kstat_irqs on node -1
[ 0.313920] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.313931] pci 0000:00:1c.3: setting latency timer to 64
[ 0.313947] pci 0000:00:1e.0: setting latency timer to 64
[ 0.313958] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.313967] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.313976] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.313984] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff]
[ 0.313993] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.314001] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.314010] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.314018] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.314027] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.314035] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.314043] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.314052] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.314060] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.314153] NET: Registered protocol family 2
[ 0.314466] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.315376] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.316528] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.317068] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.317077] TCP reno registered
[ 0.317378] NET: Registered protocol family 1
[ 0.317433] pci 0000:00:02.0: Boot video device
[ 0.318158] cpufreq-nforce2: No nForce2 chipset.
[ 0.318253] Scanning for low memory corruption every 60 seconds
[ 0.318609] audit: initializing netlink socket (disabled)
[ 0.318635] type=2000 audit(1274301857.318:1): initialized
[ 0.339265] highmem bounce pool size: 64 pages
[ 0.339284] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344332] VFS: Disk quotas dquot_6.5.2
[ 0.344529] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.346511] fuse init (API version 7.13)
[ 0.346791] msgmni has been set to 1706
[ 0.347448] alg: No test for stdrng (krng)
[ 0.347637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.347646] io scheduler noop registered
[ 0.347652] io scheduler anticipatory registered
[ 0.347658] io scheduler deadline registered
[ 0.347805] io scheduler cfq registered (default)
[ 0.348127] alloc irq_desc for 24 on node -1
[ 0.348135] alloc kstat_irqs on node -1
[ 0.348157] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.348176] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.348451] alloc irq_desc for 25 on node -1
[ 0.348458] alloc kstat_irqs on node -1
[ 0.348476] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.348494] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.348775] alloc irq_desc for 26 on node -1
[ 0.348782] alloc kstat_irqs on node -1
[ 0.348800] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.348819] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.349053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.349353] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.349639] ACPI: AC Adapter [AC0] (off-line)
[ 0.349897] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.401781] ACPI: Lid Switch [LID]
[ 0.401960] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.401971] ACPI: Sleep Button [SLPB]
[ 0.402106] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.402115] ACPI: Power Button [PWRB]
[ 0.402247] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.402256] ACPI: Power Button [PWRF]
[ 0.404137] ACPI: SSDT 3f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
[ 0.405516] ACPI: SSDT 3f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
[ 0.406685] Monitor-Mwait will be used to enter C-1 state
[ 0.406787] Monitor-Mwait will be used to enter C-2 state
[ 0.406877] Monitor-Mwait will be used to enter C-3 state
[ 0.406901] Marking TSC unstable due to TSC halts in idle
[ 0.407067] processor LNXCPU:00: registered as cooling_device0
[ 0.408071] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
[ 0.409029] ACPI: SSDT 3f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
[ 0.409857] Switching to clocksource hpet
[ 0.417370] processor LNXCPU:01: registered as cooling_device1
[ 0.434781] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.434810] ACPI: Thermal Zone [TZ00] (46 C)
[ 0.439943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.444243] brd: module loaded
[ 0.445767] loop: module loaded
[ 0.446074] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.446348] ata_piix 0000:00:1f.2: version 2.13
[ 0.446385] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.446397] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.446479] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.446699] scsi0 : ata_piix
[ 0.446934] isapnp: Scanning for PnP cards...
[ 0.496631] scsi1 : ata_piix
[ 0.500930] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.500941] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.502338] Fixed MDIO Bus: probed
[ 0.502453] PPP generic driver version 2.4.2
[ 0.502602] tun: Universal TUN/TAP device driver, 1.6
[ 0.502608] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.502862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.502920] alloc irq_desc for 23 on node -1
[ 0.502927] alloc kstat_irqs on node -1
[ 0.502945] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.502979] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.502988] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.503109] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.503160] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.503182] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.507096] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.507140] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 0.555422] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.555757] usb usb1: configuration #1 chosen from 1 choice
[ 0.555850] hub 1-0:1.0: USB hub found
[ 0.555874] hub 1-0:1.0: 8 ports detected
[ 0.556096] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.556150] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.556311] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.556333] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.556343] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.556490] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.556539] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 0.556812] usb usb2: configuration #1 chosen from 1 choice
[ 0.556899] hub 2-0:1.0: USB hub found
[ 0.556920] hub 2-0:1.0: 2 ports detected
[ 0.557064] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.557081] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.557090] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.557202] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.557273] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 0.557554] usb usb3: configuration #1 chosen from 1 choice
[ 0.557641] hub 3-0:1.0: USB hub found
[ 0.557662] hub 3-0:1.0: 2 ports detected
[ 0.557794] alloc irq_desc for 18 on node -1
[ 0.557801] alloc kstat_irqs on node -1
[ 0.557817] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.557834] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.557902] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.558009] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.558074] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 0.558361] usb usb4: configuration #1 chosen from 1 choice
[ 0.558444] hub 4-0:1.0: USB hub found
[ 0.558464] hub 4-0:1.0: 2 ports detected
[ 0.558591] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.558608] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.558617] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.558715] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.558775] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 0.559057] usb usb5: configuration #1 chosen from 1 choice
[ 0.559150] hub 5-0:1.0: USB hub found
[ 0.559172] hub 5-0:1.0: 2 ports detected
[ 0.559452] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.588814] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.588859] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.589294] mice: PS/2 mouse device common for all mice
[ 0.590256] rtc_cmos 00:03: RTC can wake from S4
[ 0.590390] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.590443] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.590881] device-mapper: uevent: version 1.0.3
[ 0.625485] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.645818] device-mapper: multipath: version 1.1.0 loaded
[ 0.645828] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.649400] EISA: Probing bus 0 at eisa.0
[ 0.649414] Cannot allocate resource for EISA slot 1
[ 0.649422] Cannot allocate resource for EISA slot 2
[ 0.649456] EISA: Detected 0 cards.
[ 0.665690] cpuidle: using governor ladder
[ 0.666014] cpuidle: using governor menu
[ 0.667272] TCP cubic registered
[ 0.667742] NET: Registered protocol family 10
[ 0.668965] lo: Disabled Privacy Extensions
[ 0.669901] NET: Registered protocol family 17
[ 0.670900] Using IPI No-Shortcut mode
[ 0.671131] PM: Resume from disk failed.
[ 0.671164] registered taskstats version 1
[ 0.672164] Magic number: 10:228:751
[ 0.672196] tty ttyS2: hash matches
[ 0.672311] rtc_cmos 00:03: setting system clock to 2010-05-19 20:44:18 UTC (1274301858)
[ 0.672320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.672325] EDD information not available.
[ 0.705382] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.829861] ACPI: Battery Slot [BAT0] (battery present)
[ 0.855514] isapnp: No Plug & Play device found
[ 0.913810] Freeing initrd memory: 12853k freed
[ 0.924228] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.001690] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 1.001703] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.017094] ata1.00: configured for UDMA/133
[ 1.017405] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 1.017740] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.017763] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.017936] sd 0:0:0:0: [sda] Write Protect is off
[ 1.017945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.018023] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.018388] sda:
[ 1.054873] usb 1-2: configuration #1 chosen from 1 choice
[ 1.079235] sda1 sda2 < sda5
[ 1.164123] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 1.176073] sda6 sda7 > sda3 sda4
[ 1.211951] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.211983] Freeing unused kernel memory: 656k freed
[ 1.212574] Write protecting the kernel text: 4676k
[ 1.212646] Write protecting the kernel read-only data: 1840k
[ 1.253340] udev: starting version 151
[ 1.344961] usb 1-8: configuration #1 chosen from 1 choice
[ 1.501627] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.501655] ATL1E 0000:03:00.0: setting latency timer to 64
[ 1.541697] Linux agpgart interface v0.103
[ 1.542845] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.542970] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.601423] Initializing USB Mass Storage driver...
[ 1.605857] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.606352] usbcore: registered new interface driver usb-storage
[ 1.606363] USB Mass Storage support registered.
[ 1.613321] usb-storage: device found at 2
[ 1.613328] usb-storage: waiting for device to settle before scanning
[ 1.646060] [drm] Initialized drm 1.1.0 20060810
[ 1.655421] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.655992] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.659113] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.722068] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.722080] i915 0000:00:02.0: setting latency timer to 64
[ 1.729814] [drm] set up 7M of stolen space
[ 1.832321] composite sync not supported
[ 1.832683] [drm] initialized overlay support
[ 2.249455] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder is 158
[ 2.249462] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 2.249470] <3>00 ff ff ff ff ff ff 00 22 64 e9 03 a8 b8 03 00 ........"d......
[ 2.249476] <3>0c 13 01 03 80 16 0d 78 0a 86 26 94 57 51 90 27 .......x..&.WQ.'
[ 2.249482] <3>21 4f 54 00 00 00 01 01 01 01 01 01 01 01 01 01 !OT.............
[ 2.249488] <3>01 01 01 01 01 01 94 11 00 b0 40 58 19 20 35 23 ..........@X. 5#
[ 2.249493] <3>45 00 dc 81 00 00 00 19 16 14 00 d8 40 58 26 20 E...........@X&
[ 2.249499] <3>7f 23 ff 04 ff 81 ff ff ff ff ff ff ff ff ff ff .#..............
[ 2.249504] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.249510] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 2.249514]
[ 2.258897] fb0: inteldrmfb frame buffer device
[ 2.258902] registered panic notifier
[ 2.258917] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.264673] vga16fb: initializing
[ 2.264686] vga16fb: mapped to 0xc00a0000
[ 2.264696] vga16fb: not registering due to another framebuffer present
[ 2.527678] Console: switching to colour frame buffer device 128x37
[ 3.633046] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 3.633058] ata1.00: BMDMA stat 0x24
[ 3.633071] ata1.00: failed command: READ DMA EXT
[ 3.633093] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 3.633099] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 3.633109] ata1.00: status: { DRDY ERR }
[ 3.633117] ata1.00: error: { UNC }
[ 3.781146] ata1.00: configured for UDMA/133
[ 3.781184] ata1: EH complete
[ 6.053484] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.053496] ata1.00: BMDMA stat 0x24
[ 6.053508] ata1.00: failed command: READ DMA EXT
[ 6.053531] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 6.053536] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 6.053547] ata1.00: status: { DRDY ERR }
[ 6.053555] ata1.00: error: { UNC }
[ 6.189118] ata1.00: configured for UDMA/133
[ 6.189155] ata1: EH complete
[ 6.612564] usb-storage: device scan complete
[ 6.613360] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.616105] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.617293] sd 2:0:0:0: [sdb] 31252024 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 6.617915] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.617929] sd 2:0:0:0: [sdb] Mode Sense: 16 07 09 51
[ 6.617938] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.621297] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.621315] sdb: sdb1 sdb2 < sdb5 >
[ 6.626750] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.626763] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 8.485325] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.485337] ata1.00: BMDMA stat 0x24
[ 8.485349] ata1.00: failed command: READ DMA EXT
[ 8.485381] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 8.485384] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 8.485391] ata1.00: status: { DRDY ERR }
[ 8.485396] ata1.00: error: { UNC }
[ 8.628987] ata1.00: configured for UDMA/133
[ 8.629036] ata1: EH complete
[ 10.917215] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 10.917227] ata1.00: BMDMA stat 0x24
[ 10.917239] ata1.00: failed command: READ DMA EXT
[ 10.917262] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 10.917267] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 10.917278] ata1.00: status: { DRDY ERR }
[ 10.917286] ata1.00: error: { UNC }
[ 11.061151] ata1.00: configured for UDMA/133
[ 11.061189] ata1: EH complete
[ 13.337908] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 13.337920] ata1.00: BMDMA stat 0x24
[ 13.337933] ata1.00: failed command: READ DMA EXT
[ 13.337955] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 13.337960] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 13.337971] ata1.00: status: { DRDY ERR }
[ 13.337979] ata1.00: error: { UNC }
[ 13.493112] ata1.00: configured for UDMA/133
[ 13.493150] ata1: EH complete
[ 15.780764] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 15.780776] ata1.00: BMDMA stat 0x24
[ 15.780789] ata1.00: failed command: READ DMA EXT
[ 15.780811] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 15.780816] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 15.780827] ata1.00: status: { DRDY ERR }
[ 15.780835] ata1.00: error: { UNC }
[ 15.925152] ata1.00: configured for UDMA/133
[ 15.925192] sd 0:0:0:0: [sda] Unhandled sense code
[ 15.925200] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 15.925213] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 15.925229] Descriptor sense data with sense descriptors (in hex):
[ 15.925237] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.925271] 12 a1 9e af
[ 15.925285] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 15.925307] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 15.925326] end_request: I/O error, dev sda, sector 312581807
[ 15.925334] Buffer I/O error on device sda, logical block 39072725
[ 15.925371] ata1: EH complete
[ 18.201427] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 18.201439] ata1.00: BMDMA stat 0x24
[ 18.201452] ata1.00: failed command: READ DMA EXT
[ 18.201475] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 18.201480] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 18.201491] ata1.00: status: { DRDY ERR }
[ 18.201499] ata1.00: error: { UNC }
[ 18.348955] ata1.00: configured for UDMA/133
[ 18.348988] ata1: EH complete
[ 20.633222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 20.633233] ata1.00: BMDMA stat 0x24
[ 20.633245] ata1.00: failed command: READ DMA EXT
[ 20.633267] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 20.633272] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 20.633283] ata1.00: status: { DRDY ERR }
[ 20.633291] ata1.00: error: { UNC }
[ 20.804951] ata1.00: configured for UDMA/133
[ 20.804980] ata1: EH complete
[ 23.109433] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 23.109444] ata1.00: BMDMA stat 0x24
[ 23.109456] ata1.00: failed command: READ DMA EXT
[ 23.109478] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 23.109483] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 23.109494] ata1.00: status: { DRDY ERR }
[ 23.109502] ata1.00: error: { UNC }
[ 23.264960] ata1.00: configured for UDMA/133
[ 23.264987] ata1: EH complete
[ 25.552349] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 25.552361] ata1.00: BMDMA stat 0x24
[ 25.552372] ata1.00: failed command: READ DMA EXT
[ 25.552394] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 25.552399] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 25.552410] ata1.00: status: { DRDY ERR }
[ 25.552418] ata1.00: error: { UNC }
[ 25.700940] ata1.00: configured for UDMA/133
[ 25.700969] ata1: EH complete
[ 27.973059] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 27.973071] ata1.00: BMDMA stat 0x24
[ 27.973082] ata1.00: failed command: READ DMA EXT
[ 27.973104] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 27.973109] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 27.973120] ata1.00: status: { DRDY ERR }
[ 27.973128] ata1.00: error: { UNC }
[ 28.116961] ata1.00: configured for UDMA/133
[ 28.116988] ata1: EH complete
[ 30.393749] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 30.393760] ata1.00: BMDMA stat 0x24
[ 30.393772] ata1.00: failed command: READ DMA EXT
[ 30.393794] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 30.393799] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 30.393810] ata1.00: status: { DRDY ERR }
[ 30.393818] ata1.00: error: { UNC }
[ 30.536939] ata1.00: configured for UDMA/133
[ 30.536972] sd 0:0:0:0: [sda] Unhandled sense code
[ 30.536981] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.536993] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 30.537009] Descriptor sense data with sense descriptors (in hex):
[ 30.537017] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 30.537051] 12 a1 9e af
[ 30.537075] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 30.537086] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 30.537105] end_request: I/O error, dev sda, sector 312581807
[ 30.537113] Buffer I/O error on device sda, logical block 39072725
[ 30.537148] ata1: EH complete
[ 32.825553] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 32.825564] ata1.00: BMDMA stat 0x24
[ 32.825577] ata1.00: failed command: READ DMA EXT
[ 32.825599] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 32.825604] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 32.825615] ata1.00: status: { DRDY ERR }
[ 32.825623] ata1.00: error: { UNC }
[ 32.968939] ata1.00: configured for UDMA/133
[ 32.968967] ata1: EH complete
[ 33.452076] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 33.629387] usb 3-1: configuration #1 chosen from 1 choice
[ 33.676294] usbcore: registered new interface driver hiddev
[ 33.692202] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 33.692879] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[ 33.723439] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input8
[ 33.723719] generic-usb 0003:046D:C521.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[ 33.723773] usbcore: registered new interface driver usbhid
[ 33.723780] usbhid: v2.6:USB HID core driver
[ 35.246263] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 35.246275] ata1.00: BMDMA stat 0x24
[ 35.246288] ata1.00: failed command: READ DMA EXT
[ 35.246310] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 35.246316] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 35.246326] ata1.00: status: { DRDY ERR }
[ 35.246335] ata1.00: error: { UNC }
[ 35.380952] ata1.00: configured for UDMA/133
[ 35.380986] ata1: EH complete
[ 37.666946] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 37.666957] ata1.00: BMDMA stat 0x24
[ 37.666969] ata1.00: failed command: READ DMA EXT
[ 37.666991] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 37.666996] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 37.667007] ata1.00: status: { DRDY ERR }
[ 37.667015] ata1.00: error: { UNC }
[ 37.788958] ata1.00: configured for UDMA/133
[ 37.788985] ata1: EH complete
[ 40.076544] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 40.076555] ata1.00: BMDMA stat 0x24
[ 40.076567] ata1.00: failed command: READ DMA EXT
[ 40.076589] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 40.076594] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 40.076604] ata1.00: status: { DRDY ERR }
[ 40.076612] ata1.00: error: { UNC }
[ 40.220961] ata1.00: configured for UDMA/133
[ 40.220990] ata1: EH complete
[ 42.497244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 42.497255] ata1.00: BMDMA stat 0x24
[ 42.497267] ata1.00: failed command: READ DMA EXT
[ 42.497289] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 42.497294] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 42.497305] ata1.00: status: { DRDY ERR }
[ 42.497313] ata1.00: error: { UNC }
[ 42.644941] ata1.00: configured for UDMA/133
[ 42.644969] ata1: EH complete
[ 44.929044] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 44.929056] ata1.00: BMDMA stat 0x24
[ 44.929067] ata1.00: failed command: READ DMA EXT
[ 44.929090] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 44.929095] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 44.929106] ata1.00: status: { DRDY ERR }
[ 44.929114] ata1.00: error: { UNC }
[ 45.072933] ata1.00: configured for UDMA/133
[ 45.072966] sd 0:0:0:0: [sda] Unhandled sense code
[ 45.072975] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 45.072987] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 45.073003] Descriptor sense data with sense descriptors (in hex):
[ 45.073011] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 45.073044] 12 a1 9e af
[ 45.073069] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 45.073079] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 45.073098] end_request: I/O error, dev sda, sector 312581807
[ 45.073106] Buffer I/O error on device sda, logical block 39072725
[ 45.073138] ata1: EH complete
[ 47.360857] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 47.360869] ata1.00: BMDMA stat 0x24
[ 47.360881] ata1.00: failed command: READ DMA EXT
[ 47.360903] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 47.360908] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 47.360919] ata1.00: status: { DRDY ERR }
[ 47.360927] ata1.00: error: { UNC }
[ 47.492940] ata1.00: configured for UDMA/133
[ 47.492969] ata1: EH complete
[ 49.770445] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 49.770456] ata1.00: BMDMA stat 0x24
[ 49.770468] ata1.00: failed command: READ DMA EXT
[ 49.770490] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 49.770495] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 49.770506] ata1.00: status: { DRDY ERR }
[ 49.770514] ata1.00: error: { UNC }
[ 49.916947] ata1.00: configured for UDMA/133
[ 49.916974] ata1: EH complete
[ 52.191147] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.191158] ata1.00: BMDMA stat 0x24
[ 52.191169] ata1.00: failed command: READ DMA EXT
[ 52.191192] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 52.191197] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 52.191208] ata1.00: status: { DRDY ERR }
[ 52.191216] ata1.00: error: { UNC }
[ 52.364931] ata1.00: configured for UDMA/133
[ 52.364959] ata1: EH complete
[ 54.645106] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 54.645117] ata1.00: BMDMA stat 0x24
[ 54.645129] ata1.00: failed command: READ DMA EXT
[ 54.645151] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 54.645156] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 54.645167] ata1.00: status: { DRDY ERR }
[ 54.645175] ata1.00: error: { UNC }
[ 54.788941] ata1.00: configured for UDMA/133
[ 54.788967] ata1: EH complete
[ 57.065808] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 57.065819] ata1.00: BMDMA stat 0x24
[ 57.065831] ata1.00: failed command: READ DMA EXT
[ 57.065853] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 57.065858] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 57.065868] ata1.00: status: { DRDY ERR }
[ 57.065876] ata1.00: error: { UNC }
[ 57.208941] ata1.00: configured for UDMA/133
[ 57.208969] ata1: EH complete
[ 59.497658] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 59.497669] ata1.00: BMDMA stat 0x24
[ 59.497681] ata1.00: failed command: READ DMA EXT
[ 59.497703] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 59.497708] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 59.497719] ata1.00: status: { DRDY ERR }
[ 59.497727] ata1.00: error: { UNC }
[ 59.632953] ata1.00: configured for UDMA/133
[ 59.632983] sd 0:0:0:0: [sda] Unhandled sense code
[ 59.632992] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 59.633003] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 59.633019] Descriptor sense data with sense descriptors (in hex):
[ 59.633027] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 59.633061] 12 a1 9e af
[ 59.633086] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 59.633097] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 59.633116] end_request: I/O error, dev sda, sector 312581807
[ 59.633123] Buffer I/O error on device sda, logical block 39072725
[ 59.633155] ata1: EH complete
[ 61.907246] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.907258] ata1.00: BMDMA stat 0x24
[ 61.907270] ata1.00: failed command: READ DMA EXT
[ 61.907292] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 61.907297] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 61.907308] ata1.00: status: { DRDY ERR }
[ 61.907316] ata1.00: error: { UNC }
[ 62.052960] ata1.00: configured for UDMA/133
[ 62.052990] ata1: EH complete
[ 64.327955] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 64.327966] ata1.00: BMDMA stat 0x24
[ 64.327978] ata1.00: failed command: READ DMA EXT
[ 64.328000] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 64.328005] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 64.328048] ata1.00: status: { DRDY ERR }
[ 64.328060] ata1.00: error: { UNC }
[ 64.448939] ata1.00: configured for UDMA/133
[ 64.448967] ata1: EH complete
[ 66.726444] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 66.726455] ata1.00: BMDMA stat 0x24
[ 66.726466] ata1.00: failed command: READ DMA EXT
[ 66.726489] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 66.726494] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 66.726505] ata1.00: status: { DRDY ERR }
[ 66.726513] ata1.00: error: { UNC }
[ 66.872943] ata1.00: configured for UDMA/133
[ 66.872972] ata1: EH complete
[ 69.158244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 69.158255] ata1.00: BMDMA stat 0x24
[ 69.158267] ata1.00: failed command: READ DMA EXT
[ 69.158289] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 69.158294] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 69.158305] ata1.00: status: { DRDY ERR }
[ 69.158313] ata1.00: error: { UNC }
[ 69.300938] ata1.00: configured for UDMA/133
[ 69.300965] ata1: EH complete
[ 71.578944] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 71.578955] ata1.00: BMDMA stat 0x24
[ 71.578967] ata1.00: failed command: READ DMA EXT
[ 71.578989] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 71.578994] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 71.579005] ata1.00: status: { DRDY ERR }
[ 71.579013] ata1.00: error: { UNC }
[ 71.756928] ata1.00: configured for UDMA/133
[ 71.756958] ata1: EH complete
[ 74.055164] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 74.055175] ata1.00: BMDMA stat 0x24
[ 74.055186] ata1.00: failed command: READ DMA EXT
[ 74.055208] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 74.055213] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 74.055224] ata1.00: status: { DRDY ERR }
[ 74.055232] ata1.00: error: { UNC }
[ 74.224961] ata1.00: configured for UDMA/133
[ 74.224992] sd 0:0:0:0: [sda] Unhandled sense code
[ 74.225001] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 74.225013] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 74.225028] Descriptor sense data with sense descriptors (in hex):
[ 74.225036] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 74.225070] 12 a1 9e af
[ 74.225095] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 74.225106] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 74.225124] end_request: I/O error, dev sda, sector 312581807
[ 74.225132] Buffer I/O error on device sda, logical block 39072725
[ 74.225162] ata1: EH complete
[ 76.509181] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 76.509193] ata1.00: BMDMA stat 0x24
[ 76.509205] ata1.00: failed command: READ DMA EXT
[ 76.509227] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 76.509232] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 76.509243] ata1.00: status: { DRDY ERR }
[ 76.509251] ata1.00: error: { UNC }
[ 76.652949] ata1.00: configured for UDMA/133
[ 76.652979] ata1: EH complete
[ 78.940977] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 78.940989] ata1.00: BMDMA stat 0x24
[ 78.941000] ata1.00: failed command: READ DMA EXT
[ 78.941022] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 78.941028] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 78.941038] ata1.00: status: { DRDY ERR }
[ 78.941046] ata1.00: error: { UNC }
[ 79.084943] ata1.00: configured for UDMA/133
[ 79.084969] ata1: EH complete
[ 81.361679] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 81.361690] ata1.00: BMDMA stat 0x24
[ 81.361701] ata1.00: failed command: READ DMA EXT
[ 81.361724] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 81.361729] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 81.361740] ata1.00: status: { DRDY ERR }
[ 81.361748] ata1.00: error: { UNC }
[ 81.524945] ata1.00: configured for UDMA/133
[ 81.524974] ata1: EH complete
[ 83.804533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 83.804545] ata1.00: BMDMA stat 0x24
[ 83.804556] ata1.00: failed command: READ DMA EXT
[ 83.804579] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 83.804584] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 83.804594] ata1.00: status: { DRDY ERR }
[ 83.804603] ata1.00: error: { UNC }
[ 83.956945] ata1.00: configured for UDMA/133
[ 83.956972] ata1: EH complete
[ 86.258601] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 86.258612] ata1.00: BMDMA stat 0x24
[ 86.258624] ata1.00: failed command: READ DMA EXT
[ 86.258646] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 86.258651] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 86.258662] ata1.00: status: { DRDY ERR }
[ 86.258670] ata1.00: error: { UNC }
[ 86.404947] ata1.00: configured for UDMA/133
[ 86.404975] ata1: EH complete
[ 88.701489] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 88.701500] ata1.00: BMDMA stat 0x24
[ 88.701512] ata1.00: failed command: READ DMA EXT
[ 88.701534] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 88.701539] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 88.701550] ata1.00: status: { DRDY ERR }
[ 88.701558] ata1.00: error: { UNC }
[ 88.832944] ata1.00: configured for UDMA/133
[ 88.832974] sd 0:0:0:0: [sda] Unhandled sense code
[ 88.832983] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 88.832995] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 88.833010] Descriptor sense data with sense descriptors (in hex):
[ 88.833018] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 88.833052] 12 a1 9e af
[ 88.833077] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 88.833088] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 88.833107] end_request: I/O error, dev sda, sector 312581807
[ 88.833114] Buffer I/O error on device sda, logical block 39072725
[ 88.833145] ata1: EH complete
[ 91.122205] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 91.122216] ata1.00: BMDMA stat 0x24
[ 91.122228] ata1.00: failed command: READ DMA EXT
[ 91.122251] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 91.122256] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 91.122267] ata1.00: status: { DRDY ERR }
[ 91.122275] ata1.00: error: { UNC }
[ 91.264938] ata1.00: configured for UDMA/133
[ 91.264969] ata1: EH complete
[ 93.542850] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 93.542861] ata1.00: BMDMA stat 0x24
[ 93.542872] ata1.00: failed command: READ DMA EXT
[ 93.542895] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 93.542900] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 93.542910] ata1.00: status: { DRDY ERR }
[ 93.542918] ata1.00: error: { UNC }
[ 93.716959] ata1.00: configured for UDMA/133
[ 93.716986] ata1: EH complete
[ 96.008033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 96.008045] ata1.00: BMDMA stat 0x24
[ 96.008056] ata1.00: failed command: READ DMA EXT
[ 96.008078] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 96.008083] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 96.008094] ata1.00: status: { DRDY ERR }
[ 96.008102] ata1.00: error: { UNC }
[ 96.152941] ata1.00: configured for UDMA/133
[ 96.152969] ata1: EH complete
[ 98.439817] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 98.439828] ata1.00: BMDMA stat 0x24
[ 98.439840] ata1.00: failed command: READ DMA EXT
[ 98.439862] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 98.439867] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 98.439878] ata1.00: status: { DRDY ERR }
[ 98.439886] ata1.00: error: { UNC }
[ 98.572940] ata1.00: configured for UDMA/133
[ 98.572967] ata1: EH complete
[ 100.871623] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 100.871635] ata1.00: BMDMA stat 0x24
[ 100.871646] ata1.00: failed command: READ DMA EXT
[ 100.871669] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 100.871674] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 100.871684] ata1.00: status: { DRDY ERR }
[ 100.871692] ata1.00: error: { UNC }
[ 101.004944] ata1.00: configured for UDMA/133
[ 101.004972] ata1: EH complete
[ 103.281218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 103.281229] ata1.00: BMDMA stat 0x24
[ 103.281240] ata1.00: failed command: READ DMA EXT
[ 103.281262] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 103.281267] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 103.281278] ata1.00: status: { DRDY ERR }
[ 103.281286] ata1.00: error: { UNC }
[ 103.424939] ata1.00: configured for UDMA/133
[ 103.424969] sd 0:0:0:0: [sda] Unhandled sense code
[ 103.424977] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 103.424989] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 103.425004] Descriptor sense data with sense descriptors (in hex):
[ 103.425012] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 103.425046] 12 a1 9e af
[ 103.425071] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 103.425082] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 103.425100] end_request: I/O error, dev sda, sector 312581807
[ 103.425108] Buffer I/O error on device sda, logical block 39072725
[ 103.425138] ata1: EH complete
[ 105.746337] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 105.746348] ata1.00: BMDMA stat 0x24
[ 105.746360] ata1.00: failed command: READ DMA EXT
[ 105.746382] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 105.746387] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 105.746398] ata1.00: status: { DRDY ERR }
[ 105.746406] ata1.00: error: { UNC }
[ 105.888967] ata1.00: configured for UDMA/133
[ 105.888996] ata1: EH complete
[ 108.178133] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 108.178144] ata1.00: BMDMA stat 0x24
[ 108.178155] ata1.00: failed command: READ DMA EXT
[ 108.178177] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 108.178182] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 108.178193] ata1.00: status: { DRDY ERR }
[ 108.178201] ata1.00: error: { UNC }
[ 108.320964] ata1.00: configured for UDMA/133
[ 108.320991] ata1: EH complete
[ 110.598834] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 110.598845] ata1.00: BMDMA stat 0x24
[ 110.598856] ata1.00: failed command: READ DMA EXT
[ 110.598878] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 110.598883] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 110.598894] ata1.00: status: { DRDY ERR }
[ 110.598902] ata1.00: error: { UNC }
[ 110.744943] ata1.00: configured for UDMA/133
[ 110.744971] ata1: EH complete
[ 113.041740] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.041751] ata1.00: BMDMA stat 0x24
[ 113.041762] ata1.00: failed command: READ DMA EXT
[ 113.041784] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 113.041789] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 113.041800] ata1.00: status: { DRDY ERR }
[ 113.041808] ata1.00: error: { UNC }
[ 113.196963] ata1.00: configured for UDMA/133
[ 113.196989] ata1: EH complete
[ 115.473544] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.473555] ata1.00: BMDMA stat 0x24
[ 115.473566] ata1.00: failed command: READ DMA EXT
[ 115.473589] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 115.473594] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 115.473604] ata1.00: status: { DRDY ERR }
[ 115.473612] ata1.00: error: { UNC }
[ 115.620943] ata1.00: configured for UDMA/133
[ 115.620971] ata1: EH complete
[ 117.905344] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.905355] ata1.00: BMDMA stat 0x24
[ 117.905366] ata1.00: failed command: READ DMA EXT
[ 117.905389] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 117.905394] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 117.905404] ata1.00: status: { DRDY ERR }
[ 117.905412] ata1.00: error: { UNC }
[ 118.048942] ata1.00: configured for UDMA/133
[ 118.048973] sd 0:0:0:0: [sda] Unhandled sense code
[ 118.048981] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 118.048993] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 118.049008] Descriptor sense data with sense descriptors (in hex):
[ 118.049015] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 118.049049] 12 a1 9e af
[ 118.049063] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 118.049085] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 118.049104] end_request: I/O error, dev sda, sector 312581807
[ 118.049111] Buffer I/O error on device sda, logical block 39072725
[ 118.049139] ata1: EH complete
[ 120.337153] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 120.337164] ata1.00: BMDMA stat 0x24
[ 120.337176] ata1.00: failed command: READ DMA EXT
[ 120.337198] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 120.337203] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 120.337214] ata1.00: status: { DRDY ERR }
[ 120.337222] ata1.00: error: { UNC }
[ 120.480940] ata1.00: configured for UDMA/133
[ 120.480970] ata1: EH complete
[ 122.757842] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 122.757853] ata1.00: BMDMA stat 0x24
[ 122.757865] ata1.00: failed command: READ DMA EXT
[ 122.757887] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 122.757892] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 122.757903] ata1.00: status: { DRDY ERR }
[ 122.757911] ata1.00: error: { UNC }
[ 122.892943] ata1.00: configured for UDMA/133
[ 122.892971] ata1: EH complete
[ 125.178546] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 125.178557] ata1.00: BMDMA stat 0x24
[ 125.178569] ata1.00: failed command: READ DMA EXT
[ 125.178591] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 125.178596] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 125.178607] ata1.00: status: { DRDY ERR }
[ 125.178615] ata1.00: error: { UNC }
[ 125.324947] ata1.00: configured for UDMA/133
[ 125.324977] ata1: EH complete
[ 127.599195] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 127.599206] ata1.00: BMDMA stat 0x24
[ 127.599217] ata1.00: failed command: READ DMA EXT
[ 127.599239] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 127.599244] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 127.599255] ata1.00: status: { DRDY ERR }
[ 127.599263] ata1.00: error: { UNC }
[ 127.744951] ata1.00: configured for UDMA/133
[ 127.744978] ata1: EH complete
[ 130.019990] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 130.020001] ata1.00: BMDMA stat 0x24
[ 130.020050] ata1.00: failed command: READ DMA EXT
[ 130.020076] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 130.020081] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 130.020092] ata1.00: status: { DRDY ERR }
[ 130.020100] ata1.00: error: { UNC }
[ 130.140964] ata1.00: configured for UDMA/133
[ 130.140991] ata1: EH complete
[ 132.440645] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 132.440656] ata1.00: BMDMA stat 0x24
[ 132.440667] ata1.00: failed command: READ DMA EXT
[ 132.440689] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 132.440694] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 132.440705] ata1.00: status: { DRDY ERR }
[ 132.440713] ata1.00: error: { UNC }
[ 132.584961] ata1.00: configured for UDMA/133
[ 132.584992] sd 0:0:0:0: [sda] Unhandled sense code
[ 132.585000] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 132.585012] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 132.585028] Descriptor sense data with sense descriptors (in hex):
[ 132.585036] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 132.585070] 12 a1 9e af
[ 132.585095] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 132.585106] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 132.585124] end_request: I/O error, dev sda, sector 312581807
[ 132.585132] Buffer I/O error on device sda, logical block 39072725
[ 132.585161] ata1: EH complete
[ 134.872499] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 134.872510] ata1.00: BMDMA stat 0x24
[ 134.872522] ata1.00: failed command: READ DMA EXT
[ 134.872544] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 134.872549] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 134.872560] ata1.00: status: { DRDY ERR }
[ 134.872568] ata1.00: error: { UNC }
[ 135.004964] ata1.00: configured for UDMA/133
[ 135.004991] ata1: EH complete
[ 137.293133] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 137.293144] ata1.00: BMDMA stat 0x24
[ 137.293156] ata1.00: failed command: READ DMA EXT
[ 137.293178] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 137.293183] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 137.293194] ata1.00: status: { DRDY ERR }
[ 137.293202] ata1.00: error: { UNC }
[ 137.436967] ata1.00: configured for UDMA/133
[ 137.436996] ata1: EH complete
[ 139.724997] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 139.725008] ata1.00: BMDMA stat 0x24
[ 139.725020] ata1.00: failed command: READ DMA EXT
[ 139.725042] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 139.725047] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 139.725058] ata1.00: status: { DRDY ERR }
[ 139.725066] ata1.00: error: { UNC }
[ 139.868966] ata1.00: configured for UDMA/133
[ 139.868993] ata1: EH complete
[ 142.156703] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 142.156714] ata1.00: BMDMA stat 0x24
[ 142.156726] ata1.00: failed command: READ DMA EXT
[ 142.156748] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 142.156753] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 142.156764] ata1.00: status: { DRDY ERR }
[ 142.156772] ata1.00: error: { UNC }
[ 142.332941] ata1.00: configured for UDMA/133
[ 142.332969] ata1: EH complete
[ 144.610761] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 144.610772] ata1.00: BMDMA stat 0x24
[ 144.610783] ata1.00: failed command: READ DMA EXT
[ 144.610805] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 144.610811] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 144.610821] ata1.00: status: { DRDY ERR }
[ 144.610829] ata1.00: error: { UNC }
[ 144.752950] ata1.00: configured for UDMA/133
[ 144.752976] ata1: EH complete
[ 147.042567] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 147.042579] ata1.00: BMDMA stat 0x24
[ 147.042590] ata1.00: failed command: READ DMA EXT
[ 147.042612] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in
[ 147.042617] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error)
[ 147.042628] ata1.00: status: { DRDY ERR }
[ 147.042636] ata1.00: error: { UNC }
[ 147.188964] ata1.00: configured for UDMA/133
[ 147.188996] sd 0:0:0:0: [sda] Unhandled sense code
[ 147.189004] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 147.189016] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 147.189031] Descriptor sense data with sense descriptors (in hex):
[ 147.189039] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 147.189073] 12 a1 9e af
[ 147.189098] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 147.189109] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00
[ 147.189127] end_request: I/O error, dev sda, sector 312581807
[ 147.189134] Buffer I/O error on device sda, logical block 39072725
[ 147.189162] ata1: EH complete
[ 149.017409] composite sync not supported
[ 149.239258] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 155.092594] Adding 1952760k swap on /dev/sdb5. Priority:-1 extents:1 across:1952760k
[ 155.166806] udev: starting version 151
[ 155.278765] lp: driver loaded but no devices found
[ 155.562437] eeepc_laptop: Eee PC Hotkey Driver
[ 155.563768] eeepc_laptop: Hotkey init flags 0x41
[ 155.564082] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 155.580323] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[ 155.580341] eeepc_laptop: Get control methods supported: 0x6301713
[ 155.583858] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input9
[ 155.942821] Linux video capture interface: v2.00
[ 155.945409] cfg80211: Calling CRDA to update world regulatory domain
[ 155.976184] intel_rng: FWH not detected
[ 156.010982] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 156.036065] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[ 156.036234] usbcore: registered new interface driver uvcvideo
[ 156.036244] USB Video Class driver (v0.1.0)
[ 156.065450] cfg80211: World regulatory domain updated:
[ 156.065460] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 156.065470] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 156.065479] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 156.065489] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 156.065498] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 156.065507] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 156.214502] ath9k 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 156.214525] ath9k 0000:01:00.0: setting latency timer to 64
[ 156.404412] psmouse serio1: ID: 10 00 64
[ 156.598517] elantech.c: assuming hardware version 2, firmware version 2.48
[ 156.653402] ath: EEPROM regdomain: 0x60
[ 156.653411] ath: EEPROM indicates we should expect a direct regpair map
[ 156.653423] ath: Country alpha2 being used: 00
[ 156.653429] ath: Regpair used: 0x60
[ 156.684443] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 156.693221] type=1505 audit(1274291214.520:2): operation="profile_load" pid=691 name="/sbin/dhclient3"
[ 156.693988] type=1505 audit(1274291214.520:3): operation="profile_load" pid=691 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 156.694425] type=1505 audit(1274291214.520:4): operation="profile_load" pid=691 name="/usr/lib/connman/scripts/dhclient-script"
[ 156.898987] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 156.901344] Registered led device: ath9k-phy0::radio
[ 156.901404] Registered led device: ath9k-phy0::assoc
[ 156.901462] Registered led device: ath9k-phy0::tx
[ 156.901522] Registered led device: ath9k-phy0::rx
[ 156.901560] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf81a0000, irq=19
[ 156.935505] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 157.042426] alloc irq_desc for 27 on node -1
[ 157.042437] alloc kstat_irqs on node -1
[ 157.042468] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 157.043236] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 157.101207] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 157.101279] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 157.133865] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 157.262365] type=1505 audit(1274291215.087:5): operation="profile_replace" pid=862 name="/sbin/dhclient3"
[ 157.263127] type=1505 audit(1274291215.087:6): operation="profile_replace" pid=862 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 157.263561] type=1505 audit(1274291215.087:7): operation="profile_replace" pid=862 name="/usr/lib/connman/scripts/dhclient-script"
[ 157.279433] type=1505 audit(1274291215.103:8): operation="profile_load" pid=863 name="/usr/bin/evince"
[ 157.301674] type=1505 audit(1274291215.127:9): operation="profile_load" pid=863 name="/usr/bin/evince-previewer"
[ 157.310391] type=1505 audit(1274291215.135:10): operation="profile_load" pid=863 name="/usr/bin/evince-thumbnailer"
[ 157.347971] type=1505 audit(1274291215.171:11): operation="profile_load" pid=868 name="/usr/bin/freshclam"
[ 157.752144] composite sync not supported
[ 157.890705] composite sync not supported
[ 158.230977] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 158.249058] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000
[ 158.249458] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
As you might notice it seems to get stuck with that EMASK exception that seems to be caused by a bad sector. When I used BackTrack 4 this lead me to the initramfs, and made it impossible to start. Ubuntu installed to a USB-stick starts, but with a delay.
Adv Reply
Bookmarks