Setting Asus USB N13 in ubuntu 9.10

[828688 Ben]

Hi everyone,
I am not only VERY new to Ubuntu, but i am new to linux as well, so any answers to my question need to be as simple as possible, so i can understand it. Anyways, i need help setting up an Asus USB N-13 wireless adapter (when i plug it NOTHING happens (the light on the device doesn't even blink)). I was trying to use this (click me), but i got confused mid way through. Any help would be great.
P.S. I have Ubuntu 10.04 LTS

Thanks in advanced,
Ben

[chili555]

Please open Applications > Accessories > Terminal and post:

lsusb

Thanks.

[828688 Ben]

benjamin@Ben-laptop:~$ lsusb
Bus 001 Device 012: ID 0b05:1784 ASUSTek Computer, Inc.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
benjamin@Ben-laptop:~$

[chili555]

I am not only VERY new to Ubuntu, but i am new to linux as well, so any answers to my question need to be as simple as possible, so i can understand it.

Here we go! Remove the device from the USB slot. Open a terminal and do these commands; it is perfectly alright to copy and paste and proofread carefully. Spacing, case and spelling must be exact!

sudo gedit /etc/udev/rules.d/network_drivers.rules

The text editor gedit will pop open as a new file. Type in one long line:

ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", ATTR{idProduct}=="1784", RUN+="/sbin/modprobe -qba rt3070sta"

Proofread carefully, save and close gedit.

sudo gedit /etc/modprobe.d/network_drivers.conf

Type in one long line:

install rt3070sta /sbin/modprobe --ignore-install rt3070sta $CMDLINE_OPTS; /bin/echo "0b05 1784" > /sys/bus/usb/drivers/rt2870/new_id

Proofread carefully, save and close gedit. Detach the ethernet cable. Insert the USB device. Click the Network Manager icon and connect.


My thanks to poohstickz.

[828688 Ben]

Unfortunately, it did not work.
Here are some things that might help you, help me:

when i used windows xp, the usb wireless adapter would flash (it has a green light on it) when i plugged it in and when i used it, i have not seen it flash once now that have ubuntu (even after i tried your instructions).

after i unplugged my ethernet cable, the icon on the top of my screen that represents my internet connection show the wireless bars with an exclamation beside it.

initially, when i was setting up this device, when i was using windows xp, i used the cd that it came with to install the drivers. after installing the drivers from the cd, the usb device worked perfectly. however, when i updated the drivers to the most recent version (this is when i was using windows xp), the device failed to work, similarly to now (windows did not recognize that any device was plugged in and the green light did not flash). Maybe the newer drivers don't work?

I have also attached the linux drivers (these are drivers made for linux (they came from the included cd that i got with my wireless usb adapter)). Inside the zip file there is also (confusing and advanced) instructions on how to install these drivers in linux.

I hope this helps,
Ben

[chili555]

I am very familiar with the Realtek-provided one size fits all Suse-Debian-Gentoo-whatever drivers. They work well less often than our built-ins.

I am sorry that you did not tell me that you already tried and failed with ndiswrapper. Of course, we will need to undo, even temporarily, that installation.

Please insert the device and do:

sudo rmmod -f ndiswrapper
sudo modprobe rt3070sta

Now click the Network Manager icon ("the icon on the top of my screen that represents my internet connection") and see if you see networks. Can you connect?

If it works, we will erase your faulty ndiswrapper installation.

[828688 Ben]

It didn't work.

here's what happened---

benjamin@Ben-laptop:~$ sudo rmmod -f ndiswrapper
benjamin@Ben-laptop:~$ sudo modprobe rt3070sta
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
FATAL: Module rt3070sta not found.
sh: cannot create /sys/bus/usb/drivers/rt2870/new_id: Directory nonexistent
FATAL: Error running install command for rt3070sta
benjamin@Ben-laptop:~$

Sorry about not telling you about ndiswrapper, I completely forgot.
Do you think that i should completely reinstall ubuntu 10.04 LTS on my computer and try this all again?

Thanks Again,
Ben

[leppel]

Here we go! Remove the device from the USB slot. Open a terminal and do these commands; it is perfectly alright to copy and paste and proofread carefully. Spacing, case and spelling must be exact!

sudo gedit /etc/udev/rules.d/network_drivers.rules

The text editor gedit will pop open as a new file. Type in one long line:

ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", ATTR{idProduct}=="1784", RUN+="/sbin/modprobe -qba rt3070sta"

Proofread carefully, save and close gedit.

sudo gedit /etc/modprobe.d/network_drivers.conf

Type in one long line:

install rt3070sta /sbin/modprobe --ignore-install rt3070sta $CMDLINE_OPTS; /bin/echo "0b05 1784" > /sys/bus/usb/drivers/rt2870/new_id

Proofread carefully, save and close gedit. Detach the ethernet cable. Insert the USB device. Click the Network Manager icon and connect.


My thanks to poohstickz.

hi. Sorry to barge in on a response. But, I actually got mine to work here! my only problem is that i recently updated my system with the updater, and when my system restarted, the usb adapter is no longer working in the system. I have tried to re-run the commands given above, where the first time it was successful, and now i cant get it to work. what should i do? should there be an entry in /etc/init.d to make the driver start with the system? PLEASE HELP!!!

[chili555]

hi. Sorry to barge in on a response. But, I actually got mine to work here! my only problem is that i recently updated my system with the updater, and when my system restarted, the usb adapter is no longer working in the system. I have tried to re-run the commands given above, where the first time it was successful, and now i cant get it to work. what should i do? should there be an entry in /etc/init.d to make the driver start with the system? PLEASE HELP!!!

rt3070sta is now merged with rt2870sta. Amend the files you mentioned to change every reference to rt3070sta to rt2870sta. Reboot.

[jacklinux]

Your fix worked perfectly, i tried many methods from installing different versions of ubuntu to reinstalling no end of drivers.
Thankyou VERY much.