I've been trying to use the wireless adapter that came shipped with my computer for a while now (it is NOT a USB adapter; it seems built into the computer). However, I can't seem to get it working.
HP says that the driver is Lite-On USB Wireless 802.11 b/g Adaptor. The link for Windows download is here: http://h10025.www1.hp.com/ewfrf/wc/s...856266&os=2100
Note: I am currently connecting to the internet with my netgear USB adapter (I think the driver is something like prism_usb)
Info:
1 ) Machine Brand and Model (PC/Laptop):
It is a desktop, HP A6700f
2 ) Wireless Brand, Model and Wireless Chipset:
Code:
$ lspci
Code:00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller (rev 80)
$ lsusb
I'm not going to post this b/c the wireless adapter I'm trying to get working is NOT connected via USB.
3 ) check interface:
Code:
$ ifconfig
$ iwconfigCode:eth0 Link encap:Ethernet HWaddr 00:21:97:4e:f6:7f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:111 errors:0 dropped:0 overruns:0 frame:0 TX packets:111 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12583 (12.5 KB) TX bytes:12583 (12.5 KB) wlan0 Link encap:Ethernet HWaddr 00:22:5f:6c:2f:3f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan1 Link encap:Ethernet HWaddr 00:09:5b:91:d9:80 inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::209:5bff:fe91:d980/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12127 errors:1 dropped:0 overruns:0 frame:1 TX packets:10664 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13429464 (13.4 MB) TX bytes:1333136 (1.3 MB) wmaster0 Link encap:UNSPEC HWaddr 00-22-5F-6C-2F-3F-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
(hint) if the Wireless interface name is wlan0 you can also use
Code:
$ iwconfig wlan0
4 ) Check for modules:Code:lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"NETGEAR" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Tx-Power=10 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wlan1 IEEE 802.11-b ESSID:"NETGEAR" Nickname:"NETGEAR" Mode:Managed Frequency:2.462 GHz Access Point: 00:1E:2A:59:4C:28 Bit Rate:11 Mb/s Tx-Power:18 dBm Retry short limit:8 RTS thr:off Fragment thr:off Link Quality=42/100 Signal level=-73 dBm Noise level=-91 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Code:
$ lsmod
Code:Module Size Used by prism2_usb 216120 0 snd_usb_audio 102976 1 snd_usb_lib 19648 1 snd_usb_audio usblp 15136 0 binfmt_misc 10220 1 ppdev 8232 0 snd_hda_codec_realtek 277860 1 arc4 2144 2 snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 9352 2 snd_usb_audio,snd_hda_codec ecb 3296 2 snd_pcm_oss 44704 0 snd_mixer_oss 18976 1 snd_pcm_oss snd_pcm 93160 4 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 3460 0 rt73usb 29092 0 crc_itu_t 2336 1 rt73usb rt2x00usb 13600 1 rt73usb rt2x00lib 34624 2 rt73usb,rt2x00usb led_class 5256 1 rt2x00lib input_polldev 4720 1 rt2x00lib mac80211 210040 2 rt2x00usb,rt2x00lib snd_seq_oss 33440 0 snd_seq_midi 8192 0 snd_rawmidi 27296 2 snd_usb_lib,snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 60608 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 26992 2 snd_pcm,snd_seq amd64_edac_mod 26688 0 snd_seq_device 8308 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq i2c_nforce2 8168 0 edac_core 48876 1 amd64_edac_mod cfg80211 109144 2 rt2x00lib,mac80211 nvidia 10316904 36 snd 77096 19 snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 9088 1 snd snd_page_alloc 10928 2 snd_hda_intel,snd_pcm psmouse 57124 0 serio_raw 6596 0 lp 11908 0 parport 40528 2 ppdev,lp iptable_filter 3872 0 ip_tables 21200 1 iptable_filter x_tables 25832 1 ip_tables dm_raid45 78504 0 xor 5456 1 dm_raid45 usb_storage 66304 0 ohci1394 33780 0 ieee1394 100896 1 ohci1394 forcedeth 61292 0
5 ) Kernel boot messages
Code:
$ dmesg
Note: Line [17.696895] seems to be of importance and so does line [17.447563] and the ones after it.Code:[ 0.710006] Bluetooth: Core ver 2.15 [ 0.710021] NET: Registered protocol family 31 [ 0.710021] Bluetooth: HCI device and connection manager initialized [ 0.710021] Bluetooth: HCI socket layer initialized [ 0.710021] NetLabel: Initializing [ 0.710021] NetLabel: domain hash size = 128 [ 0.710022] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.710035] NetLabel: unlabeled traffic allowed by default [ 0.710178] PCI-DMA: Disabling AGP. [ 0.710276] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.710277] PCI-DMA: using GART IOMMU. [ 0.710281] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.711885] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.711893] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.750017] Switched to high resolution mode on CPU 0 [ 0.750708] Switched to high resolution mode on CPU 2 [ 0.750714] Switched to high resolution mode on CPU 3 [ 0.750817] Switched to high resolution mode on CPU 1 [ 0.770030] pnp: PnP ACPI init [ 0.770048] ACPI: bus type pnp registered [ 0.774862] pnp: PnP ACPI: found 12 devices [ 0.774864] ACPI: ACPI bus type pnp unregistered [ 0.774877] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.774880] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.774883] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.774888] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.774891] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.774894] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.774896] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.774899] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.774903] system 00:01: iomem range 0xfec80000-0xfecbffff has been reserved [ 0.774906] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.774909] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 0.774915] system 00:01: iomem range 0xb8000000-0xbfffffff has been reserved [ 0.774920] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.774923] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.774926] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.774933] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.774938] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved [ 0.774941] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.774950] system 00:0b: iomem range 0xb7ee0000-0xb7efffff could not be reserved [ 0.774953] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.774956] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.774959] system 00:0b: iomem range 0x100000-0xb7edffff could not be reserved [ 0.774962] system 00:0b: iomem range 0xb7f00000-0xbfefffff could not be reserved [ 0.774965] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.774968] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.774971] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.774974] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.774977] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.774980] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.779653] AppArmor: AppArmor Filesystem Enabled [ 0.779686] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.779689] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.779693] pci 0000:00:04.0: MEM window: 0xfd700000-0xfd7fffff [ 0.779697] pci 0000:00:04.0: PREFETCH window: 0xfde00000-0xfdefffff [ 0.779702] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.779705] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.779708] pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff [ 0.779711] pci 0000:00:09.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.779715] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.779718] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.779721] pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.779724] pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.779728] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.779731] pci 0000:00:0c.0: IO window: 0x8000-0x8fff [ 0.779734] pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff [ 0.779737] pci 0000:00:0c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.779745] pci 0000:00:04.0: setting latency timer to 64 [ 0.779751] pci 0000:00:09.0: setting latency timer to 64 [ 0.779756] pci 0000:00:0b.0: setting latency timer to 64 [ 0.779760] pci 0000:00:0c.0: setting latency timer to 64 [ 0.779764] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.779767] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.779770] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.779773] pci_bus 0000:01: resource 1 mem: [0xfd700000-0xfd7fffff] [ 0.779776] pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.779778] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.779781] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.779784] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.779786] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.779789] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.779792] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] [ 0.779794] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.779797] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.779800] pci_bus 0000:04: resource 0 io: [0x8000-0x8fff] [ 0.779802] pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.779805] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.779845] NET: Registered protocol family 2 [ 0.780081] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.781494] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.784921] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.785347] TCP: Hash tables configured (established 524288 bind 65536) [ 0.785350] TCP reno registered [ 0.785462] NET: Registered protocol family 1 [ 0.785529] Trying to unpack rootfs image as initramfs... [ 0.998997] Freeing initrd memory: 7931k freed [ 1.001261] Clocksource tsc unstable (delta = 341229008 ns) [ 1.002737] Scanning for low memory corruption every 60 seconds [ 1.002868] audit: initializing netlink socket (disabled) [ 1.002884] type=2000 audit(1268472543.000:1): initialized [ 1.012778] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.014500] VFS: Disk quotas dquot_6.5.2 [ 1.014560] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.015273] fuse init (API version 7.12) [ 1.015363] msgmni has been set to 7671 [ 1.015692] alg: No test for stdrng (krng) [ 1.015706] io scheduler noop registered [ 1.015709] io scheduler anticipatory registered [ 1.015711] io scheduler deadline registered [ 1.015756] io scheduler cfq registered (default) [ 1.030113] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030164] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030225] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030284] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030343] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030407] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030476] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030549] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.030556] pci 0000:00:0d.0: Boot video device [ 1.030693] alloc irq_desc for 24 on node 0 [ 1.030695] alloc kstat_irqs on node 0 [ 1.030704] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X [ 1.030710] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 1.030827] alloc irq_desc for 25 on node 0 [ 1.030828] alloc kstat_irqs on node 0 [ 1.030833] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X [ 1.030838] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.030934] alloc irq_desc for 26 on node 0 [ 1.030936] alloc kstat_irqs on node 0 [ 1.030941] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X [ 1.030945] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.031005] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.031030] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.031155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.031159] ACPI: Power Button [PWRF] [ 1.031215] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.031218] ACPI: Power Button [PWRB] [ 1.031277] fan PNP0C0B:00: registered as cooling_device0 [ 1.031282] ACPI: Fan [FAN] (on) [ 1.031673] processor LNXCPU:00: registered as cooling_device1 [ 1.031707] processor LNXCPU:01: registered as cooling_device2 [ 1.031743] processor LNXCPU:02: registered as cooling_device3 [ 1.031773] processor LNXCPU:03: registered as cooling_device4 [ 1.035676] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946 [ 1.035685] ACPI: Expecting a [Reference] package element, found type 0 [ 1.035687] ACPI: Invalid passive threshold [ 1.036006] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.036014] ACPI: Thermal Zone [THRM] (40 C) [ 1.037176] Linux agpgart interface v0.103 [ 1.037188] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.038386] brd: module loaded [ 1.038833] loop: module loaded [ 1.038904] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.039183] sata_nv 0000:00:08.0: version 3.5 [ 1.039577] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.039581] alloc irq_desc for 23 on node 0 [ 1.039583] alloc kstat_irqs on node 0 [ 1.039594] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.039652] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.039728] scsi0 : sata_nv [ 1.039821] scsi1 : sata_nv [ 1.039999] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 1.040021] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 1.040426] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 1.040430] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 1.040460] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.040501] scsi2 : sata_nv [ 1.040561] scsi3 : sata_nv [ 1.040734] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 [ 1.040737] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23 [ 1.040875] pata_amd 0000:00:06.0: version 0.4.1 [ 1.040905] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.040981] scsi4 : pata_amd [ 1.041043] scsi5 : pata_amd [ 1.041658] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.041661] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.042301] Fixed MDIO Bus: probed [ 1.042333] PPP generic driver version 2.4.2 [ 1.042432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.042830] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 1.042835] alloc irq_desc for 22 on node 0 [ 1.042837] alloc kstat_irqs on node 0 [ 1.042847] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 1.042865] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.042868] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.042911] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.042941] ehci_hcd 0000:00:02.1: debug port 1 [ 1.042945] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.042966] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 1.060025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.060097] usb usb1: configuration #1 chosen from 1 choice [ 1.060124] hub 1-0:1.0: USB hub found [ 1.060133] hub 1-0:1.0: 10 ports detected [ 1.060224] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.060635] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 1.060640] alloc irq_desc for 21 on node 0 [ 1.060642] alloc kstat_irqs on node 0 [ 1.060652] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 1.060668] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.060671] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.060705] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.060732] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 1.122078] usb usb2: configuration #1 chosen from 1 choice [ 1.122102] hub 2-0:1.0: USB hub found [ 1.122110] hub 2-0:1.0: 10 ports detected [ 1.122173] uhci_hcd: USB Universal Host Controller Interface driver [ 1.122274] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.122661] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.122674] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.122769] mice: PS/2 mouse device common for all mice [ 1.122864] rtc_cmos 00:05: RTC can wake from S4 [ 1.122897] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.122934] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.123079] device-mapper: uevent: version 1.0.3 [ 1.123176] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.123331] device-mapper: multipath: version 1.1.0 loaded [ 1.123335] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.123658] cpuidle: using governor ladder [ 1.123660] cpuidle: using governor menu [ 1.124117] TCP cubic registered [ 1.124265] NET: Registered protocol family 10 [ 1.124792] lo: Disabled Privacy Extensions [ 1.125137] NET: Registered protocol family 17 [ 1.125157] Bluetooth: L2CAP ver 2.13 [ 1.125159] Bluetooth: L2CAP socket layer initialized [ 1.125162] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.125164] Bluetooth: SCO socket layer initialized [ 1.125202] Bluetooth: RFCOMM TTY layer initialized [ 1.125205] Bluetooth: RFCOMM socket layer initialized [ 1.125207] Bluetooth: RFCOMM ver 1.11 [ 1.125242] powernow-k8: Found 1 AMD Phenom(tm) 9150e Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 1.125297] powernow-k8: 0 : pstate 0 (1800 MHz) [ 1.125299] powernow-k8: 1 : pstate 1 (900 MHz) [ 1.125718] PM: Resume from disk failed. [ 1.125731] registered taskstats version 1 [ 1.125867] Magic number: 2:835:474 [ 1.125954] rtc_cmos 00:05: setting system clock to 2010-03-13 09:29:03 UTC (1268472543) [ 1.125957] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.125959] EDD information not available. [ 1.142811] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.380415] ata3: SATA link down (SStatus 0 SControl 300) [ 1.540053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.560162] ata1.00: ATA-8: ST3500620AS, HP24, max UDMA/100 [ 1.560165] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.600145] ata1.00: configured for UDMA/100 [ 1.600246] scsi 0:0:0:0: Direct-Access ATA ST3500620AS HP24 PQ: 0 ANSI: 5 [ 1.600371] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.600408] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.600451] sd 0:0:0:0: [sda] Write Protect is off [ 1.600454] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.600477] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.600594] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 1.601863] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.740024] usb 1-7: new high speed USB device using ehci_hcd and address 5 [ 2.045664] usb 1-7: configuration #1 chosen from 1 choice [ 2.090040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.110132] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, 1.03, max UDMA/100 [ 2.150153] ata2.00: configured for UDMA/100 [ 2.158708] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L 1.03 PQ: 0 ANSI: 5 [ 2.162527] usb 1-9: new high speed USB device using ehci_hcd and address 6 [ 2.179693] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.179696] Uniform CD-ROM driver Revision: 3.20 [ 2.179765] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.179808] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.314530] usb 1-9: configuration #1 chosen from 1 choice [ 2.510405] ata4: SATA link down (SStatus 0 SControl 300) [ 2.510454] ata6: port disabled. ignoring. [ 2.510480] Freeing unused kernel memory: 664k freed [ 2.510694] Write protecting the kernel read-only data: 7596k [ 2.632342] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.632777] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 2.632784] alloc irq_desc for 20 on node 0 [ 2.632786] alloc kstat_irqs on node 0 [ 2.632798] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 2.632804] forcedeth 0000:00:07.0: setting latency timer to 64 [ 2.654887] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 2.668063] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 2.668070] alloc irq_desc for 19 on node 0 [ 2.668073] alloc kstat_irqs on node 0 [ 2.668085] ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.668091] ohci1394 0000:01:09.0: setting latency timer to 64 [ 2.679652] Initializing USB Mass Storage driver... [ 2.681189] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.682381] usbcore: registered new interface driver usb-storage [ 2.682386] USB Mass Storage support registered. [ 2.683288] usb-storage: device found at 6 [ 2.683292] usb-storage: waiting for device to settle before scanning [ 2.732067] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fd7ff000-fd7ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.171059] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:21:97:4e:f6:7f [ 3.171065] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 3.610496] xor: automatically using best checksumming function: generic_sse [ 3.660011] generic_sse: 7394.800 MB/sec [ 3.660014] xor: using function: generic_sse (7394.800 MB/sec) [ 3.662468] device-mapper: dm-raid45: initialized v0.2594b [ 3.867458] PM: Starting manual resume from disk [ 3.867463] PM: Resume from partition 8:5 [ 3.867465] PM: Checking hibernation image. [ 3.867757] PM: Resume from disk failed. [ 3.900867] kjournald starting. Commit interval 5 seconds [ 3.900877] EXT3-fs: mounted filesystem with writeback data mode. [ 4.051486] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ffd96b5d] [ 4.423424] type=1505 audit(1268472546.796:2): operation="profile_load" pid=448 name=/usr/share/gdm/guest-session/Xsession [ 4.434627] type=1505 audit(1268472546.806:3): operation="profile_load" pid=449 name=/sbin/dhclient3 [ 4.434947] type=1505 audit(1268472546.806:4): operation="profile_load" pid=449 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.435124] type=1505 audit(1268472546.806:5): operation="profile_load" pid=449 name=/usr/lib/connman/scripts/dhclient-script [ 4.454973] type=1505 audit(1268472546.826:6): operation="profile_load" pid=450 name=/usr/bin/evince [ 4.460065] type=1505 audit(1268472546.826:7): operation="profile_load" pid=450 name=/usr/bin/evince-previewer [ 4.463128] type=1505 audit(1268472546.836:8): operation="profile_load" pid=450 name=/usr/bin/evince-thumbnailer [ 4.504083] type=1505 audit(1268472546.876:9): operation="profile_load" pid=452 name=/usr/lib/cups/backend/cups-pdf [ 4.504467] type=1505 audit(1268472546.876:10): operation="profile_load" pid=452 name=/usr/sbin/cupsd [ 7.680185] usb-storage: device scan complete [ 7.680761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 7.681260] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 7.681754] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 7.682252] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 7.682668] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.682745] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 7.682816] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 7.682888] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 7.686118] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 7.686745] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 7.687367] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 7.687993] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 14.843962] Adding 10675152k swap on /dev/sda5. Priority:-1 extents:1 across:10675152k [ 14.845499] udev: starting version 147 [ 15.046924] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.188668] lp: driver loaded but no devices found [ 15.918646] nvidia: module license 'NVIDIA' taints kernel. [ 15.918651] Disabling lock debugging due to kernel taint [ 15.943370] EDAC MC: Ver: 2.1.0 Feb 8 2010 [ 15.945271] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 15.945294] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 16.107108] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 16.174319] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 16.174326] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 22 (level, low) -> IRQ 22 [ 16.174333] nvidia 0000:00:0d.0: setting latency timer to 64 [ 16.176030] EDAC amd64_edac: Ver: 3.2.0 Feb 8 2010 [ 16.176081] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 16.177135] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 16.177139] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 16.177142] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 16.177144] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 16.177145] Might be a BIOS bug, if BIOS says ECC is enabled [ 16.177146] Use of the override can cause unknown side effects. [ 16.177163] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 16.330084] cfg80211: Calling CRDA to update world regulatory domain [ 16.354215] cfg80211: World regulatory domain updated: [ 16.354219] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.354223] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.354226] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.354229] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.354232] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.354234] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.363060] EXT3 FS on sda6, internal journal [ 17.075871] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 17.075878] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 17.075945] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 17.446866] phy0: Selected rate control algorithm 'minstrel' [ 17.447563] Registered led device: rt73usb-phy0::radio [ 17.447580] Registered led device: rt73usb-phy0::assoc [ 17.447600] Registered led device: rt73usb-phy0::quality [ 17.448138] usbcore: registered new interface driver rt73usb [ 17.468683] kjournald starting. Commit interval 5 seconds [ 17.469188] EXT3 FS on sda7, internal journal [ 17.469194] EXT3-fs: mounted filesystem with writeback data mode. [ 17.562155] __ratelimit: 3 callbacks suppressed [ 17.562159] type=1505 audit(1268501359.935:12): operation="profile_replace" pid=1027 name=/usr/share/gdm/guest-session/Xsession [ 17.563983] type=1505 audit(1268501359.935:13): operation="profile_replace" pid=1029 name=/sbin/dhclient3 [ 17.564303] type=1505 audit(1268501359.935:14): operation="profile_replace" pid=1029 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 17.564484] type=1505 audit(1268501359.935:15): operation="profile_replace" pid=1029 name=/usr/lib/connman/scripts/dhclient-script [ 17.568134] type=1505 audit(1268501359.935:16): operation="profile_replace" pid=1031 name=/usr/bin/evince [ 17.573239] type=1505 audit(1268501359.945:17): operation="profile_replace" pid=1031 name=/usr/bin/evince-previewer [ 17.576336] type=1505 audit(1268501359.945:18): operation="profile_replace" pid=1031 name=/usr/bin/evince-thumbnailer [ 17.582457] type=1505 audit(1268501359.955:19): operation="profile_replace" pid=1047 name=/usr/lib/cups/backend/cups-pdf [ 17.582873] type=1505 audit(1268501359.955:20): operation="profile_replace" pid=1047 name=/usr/sbin/cupsd [ 17.585251] type=1505 audit(1268501359.955:21): operation="profile_replace" pid=1050 name=/usr/sbin/tcpdump [ 17.696895] rt73usb 1-7:1.0: firmware: requesting rt73.bin [ 17.838180] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.840238] alloc irq_desc for 27 on node 0 [ 17.840242] alloc kstat_irqs on node 0 [ 17.840253] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X [ 17.840441] eth0: no link during initialization. [ 17.841297] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.842807] usb 2-1: device descriptor read/64, error -110 [ 18.560014] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS... [ 18.600116] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5 [ 19.146284] ppdev: user-space parallel port driver [ 19.532949] usplash:377 freeing invalid memtype ffffffffe0000000-ffffffffe8000000 [ 33.132535] usb 2-1: device descriptor read/64, error -110 [ 33.422532] usb 2-1: new full speed USB device using ohci_hcd and address 3 [ 48.602522] usb 2-1: device descriptor read/64, error -110 [ 63.890021] usb 2-1: device descriptor read/64, error -110 [ 64.180018] usb 2-1: new full speed USB device using ohci_hcd and address 4 [ 69.213043] usb 2-1: device descriptor read/8, error -110 [ 74.340043] usb 2-1: device descriptor read/8, error -110 [ 74.630130] usb 2-1: new full speed USB device using ohci_hcd and address 5 [ 79.660044] usb 2-1: device descriptor read/8, error -110 [ 81.362625] usb 2-1: device descriptor read/8, error -62 [ 81.470053] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 81.812528] usb 2-3: new full speed USB device using ohci_hcd and address 6 [ 82.041192] usb 2-3: configuration #1 chosen from 1 choice [ 82.094133] usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 vid 0x050D pid 0x0002 [ 82.094167] usbcore: registered new interface driver usblp [ 82.380028] usb 2-4: new full speed USB device using ohci_hcd and address 7 [ 82.607197] usb 2-4: configuration #1 chosen from 1 choice [ 82.694652] usbcore: registered new interface driver snd-usb-audio [ 83.230039] usb 2-1: new full speed USB device using ohci_hcd and address 8 [ 83.448200] usb 2-1: configuration #1 chosen from 1 choice [ 83.522083] prism2_usb: module is from the staging directory, the quality is unknown, you have been warned. [ 83.527026] prism2_usb: Checking for firmware prism2_ru.hex [ 83.527035] usb 2-1: firmware: requesting prism2_ru.hex [ 83.534901] prism2_usb: Firmware not available, but not essential [ 83.534908] prism2_usb: can continue to use card anyway. [ 85.017052] ident: nic h/w: id=0x8026 1.0.0 [ 85.019043] ident: pri f/w: id=0x15 1.1.3 [ 85.021055] ident: sta f/w: id=0x1f 1.7.0 [ 85.023048] MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 [ 85.025044] CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 [ 85.027648] PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/4 [ 85.029058] STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12 [ 85.031044] PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 [ 85.033156] STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 [ 85.035369] STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 [ 85.037575] Prism2 card SN: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 [ 85.046518] usbcore: registered new interface driver prism2_usb [ 85.050287] usb 2-3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 85.579050] linkstatus=DISCONNECTED (unhandled) [ 85.583012] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 96.203071] linkstatus=CONNECTED [ 96.215127] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 106.290065] wlan1: no IPv6 routers present [ 259.601616] usb 2-3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 558.581057] CTLX[3] error: state(Request failed) [ 558.581065] error fetching commsqual [ 1719.942880] hda-intel: Too big adjustment 32 [ 1720.048191] hda-intel: Too big adjustment 32
6 ) Network configuration
Code:
$ sudo lshw -C network
7 ) Scan for networks:Code:*-network:0 description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:22:5f:6c:2f:3f capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg *-network:1 description: Wireless interface physical id: 2 logical name: wlan1 serial: 00:09:5b:91:d9:80 capabilities: ethernet physical wireless configuration: broadcast=yes ip=192.168.1.4 multicast=yes wireless=IEEE 802.11-b
Code:
$ iwlist scan
8 ) Ubuntu Version:Code:lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. wlan0 No scan results wlan1 No scan results
Code:
$ lsb_release -d
9 ) Kernel/architecture (including 32 vs. 64 bit):Code:Description: Ubuntu 9.10
Code:
$ uname -mr
10 ) Restarting the network:Code:2.6.31-20-generic x86_64
Code:
$ sudo /etc/init.d/networking restart
Code:* Reconfiguring network interfaces... Ignoring unknown interface wlan1=wlan1. [ OK ]
Please help, I've tried unsuccessfully to connect for almost a year now.
Adv Reply
Bookmarks