Results 1 to 5 of 5

Thread: AR8131 network not detected/disabled?!

  1. #1
    Join Date
    Jan 2006
    Beans
    16

    AR8131 network not detected/disabled?!

    Hi.

    Tried to install server version 9.04 and 9.10. Both are not detecting the AR8131 network controler. So i plugged in an other network card and installed 9.10.

    Code:
    02:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
    Code:
               *-network DISABLED
                    description: Ethernet interface
                    product: Attansic Technology Corp.
                    vendor: Attansic Technology Corp.
                    physical id: 0
                    bus info: pci@0000:02:00.0
                    logical name: eth1
                    version: c0
                    serial: 6c:f0:49:53:aa:3c
                    capacity: 1GB/s
                    width: 64 bits
                    clock: 33MHz
                    capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                    configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.0.1-NAPI firmware=N/A latency=0 link=yes multicast=yes port=twisted pair
                    resources: irq:17 memory:fdec0000-fdefffff ioport:af00(size=128)

  2. #2
    Join Date
    Oct 2006
    Location
    Milton Keynes, UK
    Beans
    1,141
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: AR8131 network not detected/disabled?!

    Is this info with the working (second) card installed or the original "not detected" card installed.
    Linux Registered User #443947 Ubuntu Regestered User #12604

    Hakunamatata ...... No worries !

  3. #3
    Join Date
    Jan 2006
    Beans
    16

    Re: AR8131 network not detected/disabled?!

    The info was of the NOT DETECTED card.

    The working i plugged in is showing this:
    Code:
               *-network
                    description: Ethernet interface
                    product: RTL-8169 Gigabit Ethernet
                    vendor: Realtek Semiconductor Co., Ltd.
                    physical id: 1
                    bus info: pci@0000:03:01.0
                    logical name: eth0
                    version: 10
                    serial: 00:11:3b:05:55:19
                    size: 100MB/s
                    capacity: 1GB/s
                    width: 32 bits
                    clock: 66MHz
                    capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                    configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.18 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
                    resources: irq:19 ioport:de00(size=256) memory:fdbff000-fdbff0ff memory:fdb00000-fdb1ffff(prefetchable)
    And ifconfig is only showing 'eth0' and 'lo', no eth1.

    The mainboard is GA-G31M-E2SL from GIGABYTE with ICH7 chipset. Of course the ethernet is enabled in BIOS.

    10.04 Alpha 3 is also not detecting this card in the installer.
    Last edited by pki; March 6th, 2010 at 05:57 PM.

  4. #4
    Join Date
    Oct 2006
    Location
    Milton Keynes, UK
    Beans
    1,141
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: AR8131 network not detected/disabled?!

    Linux Registered User #443947 Ubuntu Regestered User #12604

    Hakunamatata ...... No worries !

  5. #5
    Join Date
    Jan 2006
    Beans
    16

    Re: AR8131 network not detected/disabled?!

    I already visited this page. The links seems to work but the download is not coming after accepting the licence. Anyone can download it? Not working with FF3.5.x and Opera.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •