Code:
[ 0.622782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 0.623025] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.623271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 0.623514] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12)
[ 0.623728] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.623936] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.624155] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.624379] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12)
[ 0.624604] ACPI: WMI: Mapper loaded
[ 0.624848] SCSI subsystem initialized
[ 0.624904] libata version 3.00 loaded.
[ 0.624962] usbcore: registered new interface driver usbfs
[ 0.624983] usbcore: registered new interface driver hub
[ 0.625022] usbcore: registered new device driver usb
[ 0.625165] PCI: Using ACPI for IRQ routing
[ 0.625306] Bluetooth: Core ver 2.13
[ 0.625306] NET: Registered protocol family 31
[ 0.625306] Bluetooth: HCI device and connection manager initialized
[ 0.625306] Bluetooth: HCI socket layer initialized
[ 0.625306] NET: Registered protocol family 8
[ 0.625306] NET: Registered protocol family 20
[ 0.625306] NetLabel: Initializing
[ 0.625306] NetLabel: domain hash size = 128
[ 0.625306] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.625306] NetLabel: unlabeled traffic allowed by default
[ 0.625306] hpet0: at MMIO 0xfe800000, IRQs 2, 8, 0
[ 0.625306] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.628087] AppArmor: AppArmor Filesystem Enabled
[ 0.628101] pnp: PnP ACPI init
[ 0.628101] ACPI: bus type pnp registered
[ 0.632019] Switched to high resolution mode on CPU 0
[ 0.634528] pnp: PnP ACPI: found 20 devices
[ 0.634531] ACPI: ACPI bus type pnp unregistered
[ 0.634536] PnPBIOS: Disabled by ACPI PNP
[ 0.634549] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.634552] system 00:01: ioport range 0x500-0x50f has been reserved
[ 0.634559] system 00:02: iomem range 0xfea00000-0xfea000ff has been reserved
[ 0.634565] system 00:03: iomem range 0xf0001000-0xf0001fff has been reserved
[ 0.634571] system 00:04: iomem range 0xf0002000-0xf0002fff has been reserved
[ 0.634577] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.634580] system 00:05: ioport range 0x800-0x805 has been reserved
[ 0.634583] system 00:05: ioport range 0x290-0x297 has been reserved
[ 0.634585] system 00:05: ioport range 0x880-0x88f has been reserved
[ 0.634596] system 00:10: iomem range 0xf0000000-0xf0000fff has been reserved
[ 0.634601] system 00:11: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.634608] system 00:13: iomem range 0xf0000-0xfffff could not be reserved
[ 0.634611] system 00:13: iomem range 0xfe800000-0xfe8000ff has been reserved
[ 0.634614] system 00:13: iomem range 0xfea00000-0xfea000ff has been reserved
[ 0.634617] system 00:13: iomem range 0x5bee0000-0x5befffff could not be reserved
[ 0.634621] system 00:13: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.634624] system 00:13: iomem range 0x0-0x9ffff could not be reserved
[ 0.634627] system 00:13: iomem range 0x100000-0x5bedffff could not be reserved
[ 0.634630] system 00:13: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.634633] system 00:13: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.634636] system 00:13: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.669355] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.669359] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.669365] pci 0000:00:01.0: MEM window: 0xfb000000-0xfcffffff
[ 0.669370] pci 0000:00:01.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff
[ 0.669377] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.669381] pci 0000:00:02.0: IO window: 0xa000-0xafff
[ 0.669387] pci 0000:00:02.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.669391] pci 0000:00:02.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.669398] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.669402] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.669408] pci 0000:00:03.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.669413] pci 0000:00:03.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.669421] pci 0000:00:13.1: PCI bridge, secondary bus 0000:04
[ 0.669425] pci 0000:00:13.1: IO window: 0x9000-0x9fff
[ 0.669430] pci 0000:00:13.1: MEM window: 0xfda00000-0xfdafffff
[ 0.669435] pci 0000:00:13.1: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.669452] pci 0000:00:01.0: setting latency timer to 64
[ 0.669468] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.669473] pci 0000:00:02.0: setting latency timer to 64
[ 0.669482] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.669487] pci 0000:00:03.0: setting latency timer to 64
[ 0.669495] pci 0000:00:13.1: setting latency timer to 64
[ 0.669500] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.669502] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.669505] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 0.669507] bus: 01 index 1 mmio: [0xfb000000-0xfcffffff]
[ 0.669510] bus: 01 index 2 mmio: [0xf4000000-0xf7ffffff]
[ 0.669512] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.669515] bus: 02 index 0 io port: [0xa000-0xafff]
[ 0.669517] bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff]
[ 0.669519] bus: 02 index 2 mmio: [0xfde00000-0xfdefffff]
[ 0.669522] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.669524] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.669526] bus: 03 index 1 mmio: [0xfdd00000-0xfddfffff]
[ 0.669528] bus: 03 index 2 mmio: [0xfdc00000-0xfdcfffff]
[ 0.669531] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.669533] bus: 04 index 0 io port: [0x9000-0x9fff]
[ 0.669535] bus: 04 index 1 mmio: [0xfda00000-0xfdafffff]
[ 0.669538] bus: 04 index 2 mmio: [0xfd900000-0xfd9fffff]
[ 0.669540] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.669542] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[ 0.669545] bus: 80 index 0 io port: [0x00-0xffff]
[ 0.669547] bus: 80 index 1 mmio: [0x000000-0xffffffff]
[ 0.669561] NET: Registered protocol family 2
[ 0.669699] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.669955] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.670844] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.671361] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.671366] TCP reno registered
[ 0.671594] NET: Registered protocol family 1
[ 0.671740] checking if image is initramfs... it is
[ 1.418697] Freeing initrd memory: 7379k freed
[ 1.418847] cpufreq: No nForce2 chipset.
[ 1.419025] audit: initializing netlink socket (disabled)
[ 1.419051] type=2000 audit(1265403055.416:1): initialized
[ 1.427649] highmem bounce pool size: 64 pages
[ 1.427656] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.429043] VFS: Disk quotas dquot_6.5.1
[ 1.429107] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.429795] fuse init (API version 7.10)
[ 1.429897] msgmni has been set to 1712
[ 1.430107] alg: No test for stdrng (krng)
[ 1.430125] io scheduler noop registered
[ 1.430127] io scheduler anticipatory registered
[ 1.430129] io scheduler deadline registered
[ 1.430153] io scheduler cfq registered (default)
[ 1.430173] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.430258] pci 0000:01:00.0: Boot video device
[ 1.437505] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.437551] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.437592] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 1.437607] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.437625] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.437638] pci_express 0000:00:02.0:pcie02: allocate port service
[ 1.437651] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.437712] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.437760] pcieport-driver 0000:00:03.0: found MSI capability
[ 1.437801] pcieport-driver 0000:00:03.0: irq 2302 for MSI/MSI-X
[ 1.437818] pci_express 0000:00:03.0:pcie00: allocate port service
[ 1.437831] pci_express 0000:00:03.0:pcie01: allocate port service
[ 1.437848] pci_express 0000:00:03.0:pcie02: allocate port service
[ 1.437861] pci_express 0000:00:03.0:pcie03: allocate port service
[ 1.442009] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 1.446075] aer 0000:00:03.0:pcie01: service driver aer loaded
[ 1.446090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.446633] pciehp 0000:00:02.0:pcie02: HPC vendor_id 1106 device_id a327 ss_vid 0 ss_did 0
[ 1.446672] pciehp 0000:00:02.0:pcie02: service driver pciehp loaded
[ 1.447180] pciehp 0000:00:03.0:pcie02: HPC vendor_id 1106 device_id c327 ss_vid 0 ss_did 0
[ 1.447212] pciehp 0000:00:03.0:pcie02: service driver pciehp loaded
[ 1.447223] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.447366] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.447369] ACPI: Power Button (FF) [PWRF]
[ 1.447415] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.447418] ACPI: Power Button (CM) [PWRB]
[ 1.447462] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.447469] ACPI: Sleep Button (CM) [SLPB]
[ 1.447530] fan PNP0C0B:00: registered as cooling_device0
[ 1.447536] ACPI: Fan [FAN] (on)
[ 1.448299] processor ACPI_CPU:00: registered as cooling_device1
[ 1.453091] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.453482] ACPI: Thermal Zone [THRM] (33 C)
[ 1.453537] isapnp: Scanning for PnP cards...
[ 1.807463] isapnp: No Plug & Play device found
[ 1.808800] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.808901] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.809452] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.810348] brd: module loaded
[ 1.810691] loop: module loaded
[ 1.810776] Fixed MDIO Bus: probed
[ 1.810783] PPP generic driver version 2.4.2
[ 1.810850] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.810890] Driver 'sd' needs updating - please use bus_type methods
[ 1.810900] Driver 'sr' needs updating - please use bus_type methods
[ 1.811038] sata_via 0000:00:0f.0: version 2.4
[ 1.811064] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.811098] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.811212] scsi0 : sata_via
[ 1.811349] scsi1 : sata_via
[ 1.813255] ata1: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 1.813258] ata2: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 2.016009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.223118] ata1.00: ATA-7: MAXTOR STM380215AS, 4.AAB, max UDMA/133
[ 2.223121] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.289776] ata1.00: configured for UDMA/133
[ 2.492016] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.502811] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380215 4.AA PQ: 0 ANSI: 5
[ 2.502930] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.502948] sd 0:0:0:0: [sda] Write Protect is off
[ 2.502951] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.502978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.503055] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.503072] sd 0:0:0:0: [sda] Write Protect is off
[ 2.503074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.503100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.503106] sda: sda1 sda2 sda3
[ 2.543151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.543207] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.543635] pata_via 0000:00:0f.1: version 0.3.3
[ 2.543797] scsi2 : pata_via
[ 2.543872] scsi3 : pata_via
[ 2.545614] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 2.545618] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 2.708434] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.01, max UDMA/66
[ 2.724325] ata3.00: configured for UDMA/66
[ 2.881450] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.01 PQ: 0 ANSI: 5
[ 2.885483] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.885488] Uniform CD-ROM driver Revision: 3.20
[ 2.885615] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.885668] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.885831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.885857] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.885883] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.885958] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.885996] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdfff000
[ 2.896014] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.896088] usb usb1: configuration #1 chosen from 1 choice
[ 2.896120] hub 1-0:1.0: USB hub found
[ 2.896128] hub 1-0:1.0: 8 ports detected
[ 2.896244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.896265] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.896311] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.896320] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.896374] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.896406] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
[ 2.896490] usb usb2: configuration #1 chosen from 1 choice
[ 2.896519] hub 2-0:1.0: USB hub found
[ 2.896526] hub 2-0:1.0: 2 ports detected
[ 2.896622] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.896629] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.896677] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.896707] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
[ 2.896783] usb usb3: configuration #1 chosen from 1 choice
[ 2.896809] hub 3-0:1.0: USB hub found
[ 2.896817] hub 3-0:1.0: 2 ports detected
[ 2.896910] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.896916] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.896969] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.896991] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[ 2.897072] usb usb4: configuration #1 chosen from 1 choice
[ 2.897106] hub 4-0:1.0: USB hub found
[ 2.897114] hub 4-0:1.0: 2 ports detected
[ 2.897212] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.897220] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.897287] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.897318] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
[ 2.897401] usb usb5: configuration #1 chosen from 1 choice
[ 2.897434] hub 5-0:1.0: USB hub found
[ 2.897444] hub 5-0:1.0: 2 ports detected
[ 2.897616] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.897968] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.897976] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.898117] mice: PS/2 mouse device common for all mice
[ 2.898291] rtc_cmos 00:08: RTC can wake from S4
[ 2.898330] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.898368] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.898453] device-mapper: uevent: version 1.0.3
[ 2.898584] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.898637] device-mapper: multipath: version 1.0.5 loaded
[ 2.898640] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.898738] EISA: Probing bus 0 at eisa.0
[ 2.898778] EISA: Detected 0 cards.
[ 2.898815] cpuidle: using governor ladder
[ 2.898817] cpuidle: using governor menu
[ 2.899319] TCP cubic registered
[ 2.899429] NET: Registered protocol family 10
[ 2.899831] lo: Disabled Privacy Extensions
[ 2.900153] NET: Registered protocol family 17
[ 2.900180] Bluetooth: L2CAP ver 2.11
[ 2.900182] Bluetooth: L2CAP socket layer initialized
[ 2.900185] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.900187] Bluetooth: SCO socket layer initialized
[ 2.900235] Bluetooth: RFCOMM socket layer initialized
[ 2.900244] Bluetooth: RFCOMM TTY layer initialized
[ 2.900246] Bluetooth: RFCOMM ver 1.10
[ 2.900309] Using IPI No-Shortcut mode
[ 2.900411] registered taskstats version 1
[ 2.900544] Magic number: 14:259:851
[ 2.900643] rtc_cmos 00:08: setting system clock to 2010-02-05 20:50:57 UTC (1265403057)
[ 2.900647] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.900649] EDD information not available.
[ 2.900915] Freeing unused kernel memory: 532k freed
[ 2.901035] Write protecting the kernel text: 4120k
[ 2.901069] Write protecting the kernel read-only data: 1524k
[ 2.930907] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.237144] Floppy drive(s): fd0 is 1.44M
[ 3.256026] FDC 0 is a post-1991 82077
[ 4.126876] PM: Starting manual resume from disk
[ 4.126882] PM: Resume from partition 8:3
[ 4.126884] PM: Checking hibernation image.
[ 4.127072] PM: Resume from disk failed.
[ 4.164435] EXT4-fs: barriers enabled
[ 4.177031] kjournald2 starting. Commit interval 5 seconds
[ 4.177045] EXT4-fs: delayed allocation enabled
[ 4.177047] EXT4-fs: file extents enabled
[ 4.177158] EXT4-fs: mballoc enabled
[ 4.177164] EXT4-fs: mounted filesystem with ordered data mode.
[ 8.157145] udev: starting version 141
[ 8.299067] Linux agpgart interface v0.103
[ 8.349293] agpgart: Detected VIA P4M890 chipset
[ 8.355205] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[ 8.388700] parport_pc 00:0d: reported by Plug and Play ACPI
[ 8.388745] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.401318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.832543] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.966880] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 8.994817] ppdev: user-space parallel port driver
[ 9.264184] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.264372] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 9.264377] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 9.464144] lp0: using parport0 (interrupt-driven).
[ 9.483516] psmouse serio1: ID: 10 00 64<6>Adding 996020k swap on /dev/sda3. Priority:-1 extents:1 across:996020k
[ 10.045767] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 10.140738] EXT4 FS on sda1, internal journal on sda1:8
[ 10.994092] EXT4-fs: barriers enabled
[ 11.009163] kjournald2 starting. Commit interval 5 seconds
[ 11.012211] EXT4 FS on sda2, internal journal on sda2:8
[ 11.012215] EXT4-fs: delayed allocation enabled
[ 11.012217] EXT4-fs: file extents enabled
[ 11.016396] EXT4-fs: mballoc enabled
[ 11.016403] EXT4-fs: mounted filesystem with ordered data mode.
[ 11.251709] type=1505 audit(1265403065.847:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1973
[ 11.310301] type=1505 audit(1265403065.907:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1977
[ 11.310505] type=1505 audit(1265403065.907:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1977
[ 11.310572] type=1505 audit(1265403065.907:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1977
[ 11.310628] type=1505 audit(1265403065.907:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1977
[ 11.474355] type=1505 audit(1265403066.071:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1982
[ 11.474636] type=1505 audit(1265403066.071:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1982
[ 11.510409] type=1505 audit(1265403066.107:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1986
[ 15.725874] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.725877] Bluetooth: BNEP filters: protocol multicast
[ 15.933476] Bridge firewalling registered
[ 16.932273] [drm] Initialized drm 1.1.0 20060810
[ 16.961092] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.961242] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 17.005115] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 17.005143] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 17.005257] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 21.845185] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 75.744015] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 75.989742] usb 4-2: configuration #2 chosen from 1 choice
[ 76.070041] cdc_wdm: probe of 4-2:2.5 failed with error -22
[ 76.070057] usbcore: registered new interface driver cdc_wdm
[ 76.073665] cdc_acm 4-2:2.1: ttyACM0: USB ACM device
[ 76.076422] usbcore: registered new interface driver cdc_acm
[ 76.076428] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 76.784041] usb 4-2: USB disconnect, address 2
[ 82.360027] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 82.578121] usb 4-2: configuration #2 chosen from 1 choice
[ 82.608746] cdc_acm 4-2:2.1: ttyACM0: USB ACM device
[ 82.691617] cdc_wdm: probe of 4-2:2.5 failed with error -22
[ 110.270373] PPP BSD Compression module registered
[ 110.294841] PPP Deflate Compression module registered
[ 878.336042] usb 4-2: USB disconnect, address 3
[ 909.752020] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 909.923305] usb 1-5: configuration #1 chosen from 1 choice
[ 909.958228] Initializing USB Mass Storage driver...
[ 909.959389] usb-storage: device ignored
[ 909.959443] usbcore: registered new interface driver usb-storage
[ 909.959447] USB Mass Storage support registered.
[ 1054.568444] usb 1-5: USB disconnect, address 4
[ 1061.140019] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 1061.285328] usb 1-6: configuration #1 chosen from 1 choice
[ 1061.338394] usb-storage: device ignored
[ 1216.799530] mtrr: no MTRR for f4000000,4000000 found
[ 1218.091441] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 1218.091468] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 1218.091582] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 1219.010284] usb 1-6: USB disconnect, address 5
[ 1250.120019] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 1250.291048] usb 1-6: configuration #1 chosen from 1 choice
[ 1250.321551] usb-storage: device ignored
[ 2827.332275] usb 1-6: USB disconnect, address 6
[ 2872.488020] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 2872.659711] usb 1-3: configuration #1 chosen from 1 choice
[ 2872.690571] usb-storage: device ignored
[ 2949.430151] usb 1-3: USB disconnect, address 7
[ 2965.948014] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 2966.168126] usb 4-2: configuration #2 chosen from 1 choice
[ 2966.199772] cdc_acm 4-2:2.1: ttyACM0: USB ACM device
[ 2966.257121] cdc_wdm: probe of 4-2:2.5 failed with error -22
[ 3534.912045] usb 4-2: USB disconnect, address 4
[ 3551.792027] usb 1-5: new high speed USB device using ehci_hcd and address 9
[ 3551.963555] usb 1-5: configuration #1 chosen from 1 choice
[ 3551.995971] usb-storage: device ignored
[ 3629.007274] usb 1-5: USB disconnect, address 9
[ 3637.496026] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 3637.742637] usb 4-1: configuration #2 chosen from 1 choice
[ 3637.750989] cdc_acm 4-1:2.1: ttyACM0: USB ACM device
[ 3637.810123] cdc_wdm: probe of 4-1:2.5 failed with error -22
[ 4401.672043] usb 4-1: USB disconnect, address 5
[ 4413.548027] usb 1-6: new high speed USB device using ehci_hcd and address 11
[ 4413.719169] usb 1-6: configuration #1 chosen from 1 choice
[ 4413.751004] usb-storage: device ignored
[ 4501.403896] usb 1-6: USB disconnect, address 11
[ 4508.204027] usb 4-2: new full speed USB device using uhci_hcd and address 6
[ 4508.450185] usb 4-2: configuration #2 chosen from 1 choice
[ 4508.458816] cdc_acm 4-2:2.1: ttyACM0: USB ACM device
[ 4508.516253] cdc_wdm: probe of 4-2:2.5 failed with error -22
[ 5880.042308] usbcore: registered new interface driver usbserial
[ 5880.042325] USB Serial support registered for generic
[ 5880.042368] usbcore: registered new interface driver usbserial_generic
[ 5880.042370] usbserial: USB Serial Driver core
[ 6048.036429] usbcore: deregistering interface driver usb-storage
[10037.224074] usb 4-2: USB disconnect, address 6
[10050.588057] usb 1-6: new high speed USB device using ehci_hcd and address 13
[10050.763609] usb 1-6: configuration #1 chosen from 1 choice
[10050.777689] Initializing USB Mass Storage driver...
[10050.783776] ------------[ cut here ]------------
[10050.783780] WARNING: at /build/buildd/linux-2.6.28/fs/proc/generic.c:551 proc_register+0x10b/0x1e0()
[10050.783783] proc_dir_entry 'scsi/usb-storage' already registered
[10050.783786] Modules linked in: usb_storage(+) usbserial ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt cdc_acm cdc_wdm binfmt_misc via drm bridge stp bnep video output input_polldev lp snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device ppdev psmouse pcspkr serio_raw snd soundcore snd_page_alloc i2c_viapro shpchp parport_pc parport via_agp agpgart floppy fbcon tileblit font bitblit softcursor [last unloaded: usb_storage]
[10050.783830] Pid: 8839, comm: modprobe Not tainted 2.6.28-17-generic #58-Ubuntu
[10050.783832] Call Trace:
[10050.783839] [<c0139ba0>] warn_slowpath+0x60/0x80
[10050.783845] [<c02c7202>] ? idr_get_empty_slot+0xe2/0x270
[10050.783849] [<c02c749f>] ? ida_get_new_above+0x10f/0x1c0
[10050.783853] [<c02c749f>] ? ida_get_new_above+0x10f/0x1c0
[10050.783856] [<c02c767d>] ? idr_pre_get+0x3d/0x70
[10050.783860] [<c01ffcdb>] proc_register+0x10b/0x1e0
[10050.783864] [<c01fff83>] proc_mkdir_mode+0x33/0x50
[10050.783868] [<c01fffaf>] proc_mkdir+0xf/0x20
[10050.783874] [<c0371e06>] scsi_proc_hostdir_add+0x46/0x80
[10050.783878] [<c0366038>] scsi_host_alloc+0x2b8/0x2d0
[10050.783882] [<c0369a10>] ? scsi_error_handler+0x0/0x120
[10050.783894] [<f7f911cd>] storage_probe+0x1d/0x820 [usb_storage]
[10050.783898] [<c020c4f6>] ? sysfs_addrm_finish+0x36/0xf0
[10050.783902] [<c020bca3>] ? sysfs_add_one+0x13/0x50
[10050.783905] [<c020bd3b>] ? sysfs_addrm_start+0x5b/0xa0
[10050.783912] [<c04ff22b>] ? mutex_lock+0xb/0x20
[10050.783916] [<c03bc3e4>] ? usb_autopm_do_device+0x64/0xf0
[10050.783921] [<c03bca32>] usb_probe_interface+0xa2/0x130
[10050.783925] [<c020cb62>] ? sysfs_create_link+0x12/0x20
[10050.783931] [<c034fed6>] really_probe+0xe6/0x180
[10050.783934] [<c03bbe91>] ? usb_match_id+0x41/0x60
[10050.783939] [<c034ffae>] driver_probe_device+0x3e/0x50
[10050.783942] [<c0350049>] __driver_attach+0x89/0x90
[10050.783946] [<c034f763>] bus_for_each_dev+0x53/0x80
[10050.783950] [<c034fd09>] driver_attach+0x19/0x20
[10050.783953] [<c034ffc0>] ? __driver_attach+0x0/0x90
[10050.783957] [<c034f137>] bus_add_driver+0x1c7/0x240
[10050.783962] [<c03501e9>] driver_register+0x69/0x140
[10050.783966] [<c02c0020>] ? scsi_cmd_ioctl+0x370/0x410
[10050.783971] [<c03bccfc>] usb_register_driver+0x7c/0x100
[10050.783975] [<c020b740>] ? sysfs_ilookup_test+0x0/0x20
[10050.783982] [<f7d12000>] ? usb_stor_init+0x0/0x43 [usb_storage]
[10050.783989] [<f7d12000>] ? usb_stor_init+0x0/0x43 [usb_storage]
[10050.783996] [<f7d12027>] usb_stor_init+0x27/0x43 [usb_storage]
[10050.784000] [<c010111e>] _stext+0x2e/0x170
[10050.784023] [<c020c4d5>] ? sysfs_addrm_finish+0x15/0xf0
[10050.784027] [<c020bca3>] ? sysfs_add_one+0x13/0x50
[10050.784030] [<c020bd1f>] ? sysfs_addrm_start+0x3f/0xa0
[10050.784035] [<c01a938c>] ? __vunmap+0x9c/0xe0
[10050.784039] [<c01a938c>] ? __vunmap+0x9c/0xe0
[10050.784045] [<c01a9421>] ? vfree+0x21/0x30
[10050.784050] [<c016416d>] ? load_module+0x103d/0x1050
[10050.784061] [<c0164208>] sys_init_module+0x88/0x1b0
[10050.784064] [<c0103f6b>] sysenter_do_call+0x12/0x2f
[10050.784069] [<c0500000>] ? account_scheduler_latency+0x170/0x210
[10050.784072] ---[ end trace a01a0ff5c05afc7f ]---
[10050.784078] usb-storage: device ignored
[10050.792370] usbcore: registered new interface driver usb-storage
[10050.792375] USB Mass Storage support registered.
emiliano@emiliano-desktop:~$
ZTE MF626 en Ubuntu Karmic (linux Mint) [FUNCIONANDO]
Adv Reply
Re: ZTE MF626 en Ubuntu Karmic (linux Mint)
Re: ZTE MF626 en Ubuntu Karmic (linux Mint)
Originally Posted by JuanitoMint
Bookmarks