Results 1 to 7 of 7

Thread: Black Screen of death?

  1. November 17th, 2009 #1
    eyelessfade
    eyelessfade is offline Tea Glorious Tea!
    Join Date
    Feb 2006
    Location
    Norway
    Beans
    304
    Distro
    Kubuntu Development Release

    Black Screen of death?

    So finally I got it too...
    Karmic only boots into a black screen, I have never had this problem before. Even single user mode does start X for some reason. I've found that the problem does not lay at nvidias feet, because it also happen with nv and vesa drivers. To remove the black screen I have to do the following each time I boot:
    1. Log into my computer remote because console is also black.
    2. Kill all X references
    3. stop kdm
    4. start kdm
    5. Pray that the keyboard and mouse work (sometime they don't)


    xorg.conf:
    Code:
    # nvidia-settings: X configuration file generated by nvidia-settings                                              
# nvidia-settings:  version 1.0  (buildd@crested)  Sun Feb  1 20:25:37 UTC 2009                                   

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"    
EndSection                                   

Section "Files"
EndSection     

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1" 
    Load           "freetype"
    Load           "glx"     
EndSection                   

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection                       

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0" 
    Driver         "mouse"  
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"  
EndSection                               

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"      
EndSection                    

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Dell"
    ModelName      "2408WFP"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
    /var/log/Xorg.failsafe.log, Which seem to me is what starts when it fails
    Code:
    X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux nami 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:53:52 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-15-generic root=UUID=f148c5da-e436-4796-b0be-3de5ca4c747e ro quiet splash                                                                                                           
Build Date: 26 October 2009  05:19:56PM                                                                           
xorg-server 2:1.6.4-2ubuntu4 (buildd@)                                                                            
        Before reporting problems, check http://wiki.x.org                                                        
        to make sure that you have the latest version.                                                            
Markers: (--) probed, (**) from config file, (==) default setting,                                                
        (++) from command line, (!!) notice, (II) informational,                                                  
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.                                             
(++) Log file: "/var/log/Xorg.failsafe.log", Time: Tue Nov 17 01:05:37 2009                                       
(++) Using config file: "/etc/X11/xorg.conf.failsafe"                                                             
(==) No Layout section.  Using the first Screen section.                                                          
(**) |-->Screen "Default Screen" (0)                                                                              
(**) |   |-->Monitor "Configured Monitor"                                                                         
(**) |   |-->Device "Configured Video Device"                                                                     
(==) Automatically adding devices                                                                                 
(==) Automatically enabling devices                                                                               
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.                                                
        Entry deleted from font path.                                                                             
(==) FontPath set to:                                                                                             
        /usr/share/fonts/X11/misc,                                                                                
        /usr/share/fonts/X11/100dpi/:unscaled,                                                                    
        /usr/share/fonts/X11/75dpi/:unscaled,                                                                     
        /usr/share/fonts/X11/Type1,                                                                               
        /usr/share/fonts/X11/100dpi,                                                                              
        /usr/share/fonts/X11/75dpi,                                                                               
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,                                                         
        built-ins                                                                                                 
(==) ModulePath set to "/usr/lib/xorg/modules"                                                                    
(II) Cannot locate a core pointer device.                                                                         
(II) Cannot locate a core keyboard device.                                                                        
(II) The server relies on HAL to provide the list of input devices.                                               
        If no devices become available, reconfigure HAL or disable AllowEmptyInput.                               
(II) Loader magic: 0xb40                                                                                          
(II) Module ABI versions:                                                                                         
        X.Org ANSI C Emulation: 0.4                                                                               
        X.Org Video Driver: 5.0                                                                                   
        X.Org XInput driver : 4.0                                                                                 
        X.Org Server Extension : 2.0                                                                              
(II) Loader running on linux                                                                                      
(--) using VT number 2                                                                                            

(--) PCI:*(0:1:0:0) 10de:0193:10de:0421 nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x00009f00/128, BIOS @ 0x????????/131072                     
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)                                         
(II) No APM support in BIOS or kernel                                                                             
(II) System resource ranges:                                                                                      
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                       
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                   
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                   
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                   
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                       
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]                                                       
(II) LoadModule: "extmod"                                                                                         
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so                                                       
(II) Module extmod: vendor="X.Org Foundation"                                                                     
        compiled for 1.6.4, module version = 1.0.0                                                                
        Module class: X.Org Server Extension                                                                      
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension MIT-SCREEN-SAVER                                                                           
(II) Loading extension XFree86-VidModeExtension                                                                   
(II) Loading extension XFree86-DGA                                                                                
(II) Loading extension DPMS                                                                                       
(II) Loading extension XVideo                                                                                     
(II) Loading extension XVideo-MotionCompensation                                                                  
(II) Loading extension X-Resource                                                                                 
(II) LoadModule: "dbe"                                                                                            
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so                                                          
(II) Module dbe: vendor="X.Org Foundation"                                                                        
        compiled for 1.6.4, module version = 1.0.0                                                                
        Module class: X.Org Server Extension                                                                      
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension DOUBLE-BUFFER                                                                              
(II) LoadModule: "glx"                                                                                            
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so                                                          
(II) Module glx: vendor="NVIDIA Corporation"                                                                      
        compiled for 4.0.2, module version = 1.0.0                                                                
        Module class: X.Org Server Extension                                                                      
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 18:27:24 PDT 2009                                                   
(II) Loading extension GLX                                                                                        
(II) LoadModule: "record"                                                                                         
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so                                                       
(II) Module record: vendor="X.Org Foundation"                                                                     
        compiled for 1.6.4, module version = 1.13.0                                                               
        Module class: X.Org Server Extension                                                                      
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension RECORD                                                                                     
(II) LoadModule: "dri"                                                                                            
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so                                                          
(II) Module dri: vendor="X.Org Foundation"                                                                        
        compiled for 1.6.4, module version = 1.0.0                                                                
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension XFree86-DRI                                                                                
(II) LoadModule: "dri2"                                                                                           
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so                                                         
(II) Module dri2: vendor="X.Org Foundation"                                                                       
        compiled for 1.6.4, module version = 1.1.0                                                                
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension DRI2                                                                                       
(II) LoadModule: "vesa"                                                                                           
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so                                                           
(II) Module vesa: vendor="X.Org Foundation"                                                                       
        compiled for 1.6.3, module version = 2.2.1                                                                
        Module class: X.Org Video Driver                                                                          
        ABI class: X.Org Video Driver, version 5.0                                                                
(II) VESA: driver for VESA chipsets: vesa                                                                         
(II) Primary Device is: PCI 01@00:00:0                                                                            
(II) resource ranges after probing:                                                                               
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                       
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                   
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                   
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                   
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                       
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]                                                       
(II) Loading sub module "vbe"                                                                                     
(II) LoadModule: "vbe"                                                                                            
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.6.4, module version = 1.1.0
        ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.6.4, module version = 1.0.0
        ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: NVIDIA
(II) VESA(0): VESA VBE OEM Software Rev: 96.128
(II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
(II) VESA(0): VESA VBE OEM Product: G80 Board - p356h01
(II) VESA(0): VESA VBE OEM Product Rev: Chip Rev
(II) VESA(0): Creating default Display subsection in Screen section
        "Default Screen" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
    and /var/log/Xorg.0.log after restart
    Code:
    X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux nami 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:53:52 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-15-generic root=UUID=f148c5da-e436-4796-b0be-3de5ca4c747e ro quiet splash                                                                                                           
Build Date: 26 October 2009  05:19:56PM                                                                           
xorg-server 2:1.6.4-2ubuntu4 (buildd@)                                                                            
        Before reporting problems, check http://wiki.x.org                                                        
        to make sure that you have the latest version.                                                            
Markers: (--) probed, (**) from config file, (==) default setting,                                                
        (++) from command line, (!!) notice, (II) informational,                                                  
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.                                             
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 17 01:17:49 2009                                              
(==) Using config file: "/etc/X11/xorg.conf"                                                                      
(==) ServerLayout "Layout0"                                                                                       
(**) |-->Screen "Screen0" (0)                                                                                     
(**) |   |-->Monitor "Monitor0"                                                                                   
(**) |   |-->Device "Device0"                                                                                     
(**) |-->Input Device "Keyboard0"                                                                                 
(**) |-->Input Device "Mouse0"                                                                                    
(**) Option "Xinerama" "0"                                                                                        
(==) Automatically adding devices                                                                                 
(==) Automatically enabling devices                                                                               
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.                                                
        Entry deleted from font path.                                                                             
(==) FontPath set to:                                                                                             
        /usr/share/fonts/X11/misc,                                                                                
        /usr/share/fonts/X11/100dpi/:unscaled,                                                                    
        /usr/share/fonts/X11/75dpi/:unscaled,                                                                     
        /usr/share/fonts/X11/Type1,                                                                               
        /usr/share/fonts/X11/100dpi,                                                                              
        /usr/share/fonts/X11/75dpi,                                                                               
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,                                                         
        built-ins                                                                                                 
(==) ModulePath set to "/usr/lib/xorg/modules"                                                                    
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.                   
(WW) Disabling Keyboard0                                                                                          
(WW) Disabling Mouse0                                                                                             
(II) Loader magic: 0xb40                                                                                          
(II) Module ABI versions:                                                                                         
        X.Org ANSI C Emulation: 0.4                                                                               
        X.Org Video Driver: 5.0                                                                                   
        X.Org XInput driver : 4.0                                                                                 
        X.Org Server Extension : 2.0                                                                              
(II) Loader running on linux                                                                                      
(++) using VT number 7                                                                                            

(--) PCI:*(0:1:0:0) 10de:0193:10de:0421 nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x00009f00/128, BIOS @ 0x????????/131072                     
(II) Open ACPI successful (/var/run/acpid.socket)                                                                 
(II) System resource ranges:                                                                                      
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                       
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                   
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                   
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                   
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                       
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]                                                       
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.                  
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.                     
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.                     
(II) "record" will be loaded by default.                                                                          
(II) "dri" will be loaded by default.                                                                             
(II) "dri2" will be loaded by default.                                                                            
(II) LoadModule: "dbe"                                                                                            
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so                                                          
(II) Module dbe: vendor="X.Org Foundation"                                                                        
        compiled for 1.6.4, module version = 1.0.0                                                                
        Module class: X.Org Server Extension                                                                      
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension DOUBLE-BUFFER                                                                              
(II) LoadModule: "extmod"                                                                                         
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so                                                       
(II) Module extmod: vendor="X.Org Foundation"                                                                     
        compiled for 1.6.4, module version = 1.0.0                                                                
        Module class: X.Org Server Extension                                                                      
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension MIT-SCREEN-SAVER                                                                           
(II) Loading extension XFree86-VidModeExtension                                                                   
(II) Loading extension XFree86-DGA                                                                                
(II) Loading extension DPMS                                                                                       
(II) Loading extension XVideo                                                                                     
(II) Loading extension XVideo-MotionCompensation                                                                  
(II) Loading extension X-Resource                                                                                 
(II) LoadModule: "type1"                                                                                          
(WW) Warning, couldn't open module type1                                                                          
(II) UnloadModule: "type1"                                                                                        
(EE) Failed to load module "type1" (module does not exist, 0)                                                     
(II) LoadModule: "freetype"                                                                                       
(WW) Warning, couldn't open module freetype                                                                       
(II) UnloadModule: "freetype"                                                                                     
(EE) Failed to load module "freetype" (module does not exist, 0)                                                  
(II) LoadModule: "glx"                                                                                            
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so                                                          
(II) Module glx: vendor="NVIDIA Corporation"                                                                      
        compiled for 4.0.2, module version = 1.0.0                                                                
        Module class: X.Org Server Extension                                                                      
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 18:27:24 PDT 2009                                                   
(II) Loading extension GLX                                                                                        
(II) LoadModule: "record"                                                                                         
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so                                                       
(II) Module record: vendor="X.Org Foundation"                                                                     
        compiled for 1.6.4, module version = 1.13.0                                                               
        Module class: X.Org Server Extension                                                                      
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension RECORD                                                                                     
(II) LoadModule: "dri"                                                                                            
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so                                                          
(II) Module dri: vendor="X.Org Foundation"                                                                        
        compiled for 1.6.4, module version = 1.0.0                                                                
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension XFree86-DRI                                                                                
(II) LoadModule: "dri2"                                                                                           
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so                                                         
(II) Module dri2: vendor="X.Org Foundation"                                                                       
        compiled for 1.6.4, module version = 1.1.0                                                                
        ABI class: X.Org Server Extension, version 2.0                                                            
(II) Loading extension DRI2                                                                                       
(II) LoadModule: "nvidia"                                                                                         
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so                                                         
(II) Module nvidia: vendor="NVIDIA Corporation"                                                                   
        compiled for 4.0.2, module version = 1.0.0                                                                
        Module class: X.Org Video Driver                                                                          
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:51:02 PDT 2009                                            
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs                                                          
(II) Primary Device is: PCI 01@00:00:0                                                                            
(II) Loading sub module "fb"                                                                                      
(II) LoadModule: "fb"                                                                                             
(II) Loading /usr/lib/xorg/modules//libfb.so                                                                      
(II) Module fb: vendor="X.Org Foundation"                                                                         
        compiled for 1.6.4, module version = 1.0.0                                                                
        ABI class: X.Org ANSI C Emulation, version 0.4                                                            
(II) Loading sub module "wfb"                                                                                     
(II) LoadModule: "wfb"                                                                                            
(II) Loading /usr/lib/xorg/modules//libwfb.so                                                                     
(II) Module wfb: vendor="X.Org Foundation"                                                                        
        compiled for 1.6.4, module version = 1.0.0                                                                
        ABI class: X.Org ANSI C Emulation, version 0.4                                                            
(II) Loading sub module "ramdac"                                                                                  
(II) LoadModule: "ramdac"                                                                                         
(II) Module "ramdac" already built-in                                                                             
(II) resource ranges after probing:                                                                               
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                       
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                   
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                   
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                   
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                       
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]                                                       
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32                                                                 
(==) NVIDIA(0): RGB weight 888                                                                                    
(==) NVIDIA(0): Default visual is TrueColor                                                                       
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)                                                            
(**) NVIDIA(0): Option "TwinView" "0"                                                                             
(**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0"                                                      
(**) NVIDIA(0): Enabling RENDER acceleration                                                                      
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is                                     
(II) NVIDIA(0):     enabled.                                                                                      
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:1:0:0 (GPU-0)                                            
(--) NVIDIA(0): Memory: 655360 kBytes                                                                             
(--) NVIDIA(0): VideoBIOS: 60.80.07.00.02                                                                         
(II) NVIDIA(0): Detected PCI Express Link width: 16X                                                              
(--) NVIDIA(0): Interlaced video modes are supported on this GPU                                                  
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:1:0:0:                                     
(--) NVIDIA(0):     DELL 2408WFP (DFP-1)                                                                          
(--) NVIDIA(0): DELL 2408WFP (DFP-1): 330.0 MHz maximum pixel clock                                               
(--) NVIDIA(0): DELL 2408WFP (DFP-1): Internal Dual Link TMDS                                                     
(II) NVIDIA(0): Assigned Display Device: DFP-1                                                                    
(II) NVIDIA(0): Validated modes:                                                                                  
(II) NVIDIA(0):     "nvidia-auto-select+0+0"                                                                      
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200                                                  
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config                                          
(--) NVIDIA(0):     option                                                                                        
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.                                                                 
(--) Depth 24 pixmap format is 32 bpp                                                                             
(II) do I need RAC?  No, I don't.                                                                                 
(II) resource ranges after preInit:                                                                               
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]                                                       
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]                                                   
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]                                                   
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]                                                   
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]                                                       
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]                                                       
(II) NVIDIA(0): Initialized GPU GART.                                                                             
(II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"                                                             
(II) Loading extension NV-GLX                                                                                     
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized                                                   
(==) NVIDIA(0): Disabling shared memory pixmaps                                                                   
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture                                                     
(==) NVIDIA(0): Backing store disabled                                                                            
(==) NVIDIA(0): Silken mouse enabled                                                                              
(**) Option "dpms"                                                                                                
(**) NVIDIA(0): DPMS enabled                                                                                      
(II) Loading extension NV-CONTROL                                                                                 
(II) Loading extension XINERAMA                                                                                   
(==) RandR enabled                                                                                                
(II) Initializing built-in extension Generic Event Extension                                                      
(II) Initializing built-in extension SHAPE                                                                        
(II) Initializing built-in extension MIT-SHM                                                                      
(II) Initializing built-in extension XInputExtension                                                              
(II) Initializing built-in extension XTEST                                                                        
(II) Initializing built-in extension BIG-REQUESTS                                                                 
(II) Initializing built-in extension SYNC                                                                         
(II) Initializing built-in extension XKEYBOARD                                                                    
(II) Initializing built-in extension XC-MISC                                                                      
(II) Initializing built-in extension SECURITY                                                                     
(II) Initializing built-in extension XINERAMA                                                                     
(II) Initializing built-in extension XFIXES                                                                       
(II) Initializing built-in extension RENDER                                                                       
(II) Initializing built-in extension RANDR                                                                        
(II) Initializing built-in extension COMPOSITE                                                                    
(II) Initializing built-in extension DAMAGE                                                                       
(II) Initializing extension GLX                                                                                   
(II) config/hal: Adding input device Logitech USB Receiver                                                        
(II) LoadModule: "evdev"                                                                                          
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so                                                            
(II) Module evdev: vendor="X.Org Foundation"                                                                      
        compiled for 1.6.4, module version = 2.2.5                                                                
        Module class: X.Org XInput Driver                                                                         
        ABI class: X.Org XInput driver, version 4.0                                                               
(**) Logitech USB Receiver: always reports core events                                                            
(**) Logitech USB Receiver: Device: "/dev/input/event6"                                                           
(II) Logitech USB Receiver: Found 1 mouse buttons                                                                 
(II) Logitech USB Receiver: Found scroll wheel(s)                                                                 
(II) Logitech USB Receiver: Found keys                                                                            
(II) Logitech USB Receiver: Configuring as keyboard                                                               
(II) Logitech USB Receiver: Adding scrollwheel support                                                            
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5                                                         
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200              
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)                                
(**) Option "xkb_rules" "evdev"                                                                                   
(**) Option "xkb_model" "pc105"                                                                                   
(**) Option "xkb_layout" "no"                                                                                     
(EE) Logitech USB Receiver: failed to initialize for relative axes.                                               
(II) config/hal: Adding input device Logitech HID compliant keyboard                                              
(**) Logitech HID compliant keyboard: always reports core events                                                  
(**) Logitech HID compliant keyboard: Device: "/dev/input/event4"                                                 
(II) Logitech HID compliant keyboard: Found 20 mouse buttons                                                      
(II) Logitech HID compliant keyboard: Found keys                                                                  
(II) Logitech HID compliant keyboard: Configuring as keyboard                                                     
(**) Logitech HID compliant keyboard: YAxisMapping: buttons 4 and 5                                               
(**) Logitech HID compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200    
(II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD)                      
(**) Option "xkb_rules" "evdev"                                                                                   
(**) Option "xkb_model" "pc105"                                                                                   
(**) Option "xkb_layout" "no"                                                                                     
(II) config/hal: Adding input device Logitech HID compliant keyboard                                              
(**) Logitech HID compliant keyboard: always reports core events                                                  
(**) Logitech HID compliant keyboard: Device: "/dev/input/event3"                                                 
(II) Logitech HID compliant keyboard: Found keys                                                                  
(II) Logitech HID compliant keyboard: Configuring as keyboard                                                     
(II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD)                      
(**) Option "xkb_rules" "evdev"                                                                                   
(**) Option "xkb_model" "pc105"                                                                                   
(**) Option "xkb_layout" "no"                                                                                     
(II) config/hal: Adding input device Power Button                                                                 
(**) Power Button: always reports core events                                                                     
(**) Power Button: Device: "/dev/input/event1"                                                                    
(II) Power Button: Found keys                                                                                     
(II) Power Button: Configuring as keyboard                                                                        
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)                                         
(**) Option "xkb_rules" "evdev"                                                                                   
(**) Option "xkb_model" "pc105"                                                                                   
(**) Option "xkb_layout" "no"                                                                                     
(II) config/hal: Adding input device Power Button                                                                 
(**) Power Button: always reports core events                                                                     
(**) Power Button: Device: "/dev/input/event0"                                                                    
(II) Power Button: Found keys                                                                                     
(II) Power Button: Configuring as keyboard                                                                        
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)                                         
(**) Option "xkb_rules" "evdev"                                                                                   
(**) Option "xkb_model" "pc105"                                                                                   
(**) Option "xkb_layout" "no"                                                                                     
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.

    # uname -a
    Linux nami 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:53:52 UTC 2009 x86_64 GNU/Linux

    lspci -vv
    Code:
    00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)                         
        Subsystem: ABIT Computer Corp. Device 1083                                                                
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-      
        Latency: 0                                                                                                
        Capabilities: <access denied>                                                                             
        Kernel modules: intel-agp                                                                                 

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0                                         
        I/O behind bridge: 00009000-00009fff                                                                 
        Memory behind bridge: f8000000-fbffffff                                                              
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff                                 
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-       
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-                                        
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
        Capabilities: <access denied>                                                                        
        Kernel driver in use: pcieport-driver                                                                
        Kernel modules: shpchp                                                                               

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                            
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin A routed to IRQ 16                                                                     
        Region 4: I/O ports at ff00 [size=32]                                                                 
        Capabilities: <access denied>                                                                         
        Kernel driver in use: uhci_hcd                                                                        

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                            
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin B routed to IRQ 21                                                                     
        Region 4: I/O ports at fe00 [size=32]                                                                 
        Capabilities: <access denied>                                                                         
        Kernel driver in use: uhci_hcd                                                                        

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                            
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin D routed to IRQ 19                                                                     
        Region 4: I/O ports at fd00 [size=32]                                                                 
        Capabilities: <access denied>                                                                         
        Kernel driver in use: uhci_hcd                                                                        

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20)
        Subsystem: ABIT Computer Corp. Device 1083                                                          
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin C routed to IRQ 18                                                                     
        Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]                                     
        Capabilities: <access denied>                                                                         
        Kernel driver in use: ehci_hcd                                                                        

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0                                         
        I/O behind bridge: 0000d000-0000dfff                                                                 
        Memory behind bridge: fdc00000-fdcfffff                                                              
        Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff                                 
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-       
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-                                        
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
        Capabilities: <access denied>                                                                        
        Kernel driver in use: pcieport-driver                                                                
        Kernel modules: shpchp                                                                               

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0                                         
        I/O behind bridge: 0000c000-0000cfff                                                                 
        Memory behind bridge: fd800000-fd8fffff                                                              
        Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff                                 
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-       
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-                                        
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
        Capabilities: <access denied>                                                                        
        Kernel driver in use: pcieport-driver                                                                
        Kernel modules: shpchp                                                                               

00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Bus: primary=00, secondary=04, subordinate=05, sec-latency=0                                         
        I/O behind bridge: 0000a000-0000afff                                                                 
        Memory behind bridge: fde00000-fdefffff                                                              
        Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff                                 
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-       
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-                                        
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
        Capabilities: <access denied>                                                                        
        Kernel driver in use: pcieport-driver                                                                
        Kernel modules: shpchp                                                                               

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                            
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin A routed to IRQ 23                                                                     
        Region 4: I/O ports at fc00 [size=32]                                                                 
        Capabilities: <access denied>                                                                         
        Kernel driver in use: uhci_hcd                                                                        

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                            
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin B routed to IRQ 19                                                                     
        Region 4: I/O ports at fb00 [size=32]                                                                 
        Capabilities: <access denied>                                                                         
        Kernel driver in use: uhci_hcd                                                                        

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                            
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin C routed to IRQ 18                                                                     
        Region 4: I/O ports at fa00 [size=32]                                                                 
        Capabilities: <access denied>                                                                         
        Kernel driver in use: uhci_hcd                                                                        

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20)
        Subsystem: ABIT Computer Corp. Device 1083                                                          
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Interrupt: pin A routed to IRQ 23                                                                     
        Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]                                     
        Capabilities: <access denied>                                                                         
        Kernel driver in use: ehci_hcd                                                                        

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0                                                                                           
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=32                                        
        I/O behind bridge: 0000b000-0000bfff                                                                 
        Memory behind bridge: fdb00000-fdbfffff                                                              
        Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff                                 
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-     
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-                                        
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
        Capabilities: <access denied>                                                                        

00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                                     
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0                                                                                            
        Capabilities: <access denied>                                                                         
        Kernel modules: iTCO_wdt                                                                              

00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) (prog-if 01)                                                                                                            
        Subsystem: ABIT Computer Corp. Device 1083                                                                
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+     
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-    
        Latency: 0                                                                                                
        Interrupt: pin A routed to IRQ 28                                                                         
        Region 0: I/O ports at f900 [size=8]                                                                      
        Region 1: I/O ports at f800 [size=4]                                                                      
        Region 2: I/O ports at f700 [size=8]                                                                      
        Region 3: I/O ports at f600 [size=4]                                                                      
        Region 4: I/O ports at f500 [size=32]                                                                     
        Region 5: Memory at fdffd000 (32-bit, non-prefetchable) [size=2K]                                         
        Capabilities: <access denied>                                                                             
        Kernel driver in use: ahci                                                                                

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
        Subsystem: ABIT Computer Corp. Device 1083                             
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 11                                                                     
        Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256]                                    
        Region 4: I/O ports at 0500 [size=32]                                                                 
        Kernel modules: i2c-i801                                                                              

01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2)
        Subsystem: nVidia Corporation Device 0421                                    
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0                                                                                           
        Interrupt: pin A routed to IRQ 16                                                                    
        Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]                                   
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]                                      
        Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]                                   
        Region 5: I/O ports at 9f00 [size=128]                                                               
        [virtual] Expansion ROM at fb000000 [disabled] [size=128K]                                           
        Capabilities: <access denied>                                                                        
        Kernel driver in use: nvidia                                                                         
        Kernel modules: nvidia, nvidiafb                                                                     

03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 AHCI Controller (rev 02) (prog-if 01)
        Subsystem: ABIT Computer Corp. Device 1083                                                   
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Interrupt: pin A routed to IRQ 16                                                                    
        Region 5: Memory at fd8fe000 (32-bit, non-prefetchable) [size=8K]                                    
        [virtual] Expansion ROM at fd700000 [disabled] [size=64K]                                            
        Capabilities: <access denied>                                                                        
        Kernel driver in use: ahci                                                                           

03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 AHCI Controller (rev 02) (prog-if 85 [Master SecO PriO])                                                                                                              
        Subsystem: ABIT Computer Corp. Device 1083                                                                
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-     
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-      
        Latency: 0, Cache Line Size: 64 bytes                                                                     
        Interrupt: pin B routed to IRQ 17                                                                         
        Region 0: I/O ports at cf00 [size=8]                                                                      
        Region 1: I/O ports at ce00 [size=4]                                                                      
        Region 2: I/O ports at cd00 [size=8]                                                                      
        Region 3: I/O ports at cc00 [size=4]                                                                      
        Region 4: I/O ports at cb00 [size=16]                                                                     
        Capabilities: <access denied>                                                                             
        Kernel driver in use: pata_jmicron                                                                        

04:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Bus: primary=04, secondary=05, subordinate=05, sec-latency=32                                        
        I/O behind bridge: 0000a000-0000afff                                                                 
        Memory behind bridge: fde00000-fdefffff                                                              
        Prefetchable memory behind bridge: fdd00000-fddfffff                                                 
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-     
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-                                        
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                          
        Capabilities: <access denied>                                                                        
        Kernel modules: shpchp                                                                               

05:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
        Subsystem: ASUSTeK Computer Inc. Device 835c                                  
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 6000ns max)                                                                   
        Interrupt: pin A routed to IRQ 17                                                                     
        Region 0: I/O ports at ae00 [size=256]                                                                
        Capabilities: <access denied>                                                                         
        Kernel driver in use: AV200                                                                           
        Kernel modules: snd-virtuoso                                                                          

06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
        Subsystem: ABIT Computer Corp. Device 1083                                                      
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes                                      
        Interrupt: pin A routed to IRQ 23                                                                     
        Region 0: I/O ports at ba00 [size=256]                                                                
        Region 1: Memory at fdbff000 (32-bit, non-prefetchable) [size=256]                                    
        [virtual] Expansion ROM at fda00000 [disabled] [size=128K]                                            
        Capabilities: <access denied>                                                                         
        Kernel driver in use: r8169                                                                           
        Kernel modules: r8169                                                                                 

06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
        Subsystem: ABIT Computer Corp. Device 1083                                                      
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes                                      
        Interrupt: pin A routed to IRQ 22                                                                     
        Region 0: I/O ports at bc00 [size=256]                                                                
        Region 1: Memory at fdbfe000 (32-bit, non-prefetchable) [size=256]                                    
        [virtual] Expansion ROM at fda20000 [disabled] [size=128K]                                            
        Capabilities: <access denied>                                                                         
        Kernel driver in use: r8169
        Kernel modules: r8169

06:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10)
        Subsystem: ABIT Computer Corp. Device 1083
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 68 (500ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at fdbfd000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at fdbf8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: ohci1394
        Kernel modules: firewire-ohci, ohci1394

06:03.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA 300 TX4) (rev 02)
        Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at bf00 [size=128]
        Region 2: I/O ports at b800 [size=256]
        Region 3: Memory at fdbfc000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at fdbc0000 (32-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at fda40000 [disabled] [size=32K]
        Capabilities: <access denied>
        Kernel driver in use: sata_promise
    $lsmod
    Code:
    Module                  Size  Used by
xt_multiport            3552  1      
binfmt_misc            10220  1      
ppdev                   8232  0      
vboxnetadp             93292  0      
vboxnetflt            100300  0      
xt_limit                3236  8      
xt_tcpudp               3616  27     
ipt_LOG                 6404  8      
ipt_MASQUERADE          2944  0      
xt_DSCP                 3744  5      
ipt_REJECT              3584  1      
nf_conntrack_irc        6552  0      
nf_conntrack_ftp        9016  0      
xt_state                2432  6      
vboxdrv              1708492  1 vboxnetflt
kvm_intel              51528  0           
kvm                   190584  1 kvm_intel 
xfs                   535136  1           
exportfs                5472  1 xfs       
iptable_nat             6656  0           
nf_nat                 22164  2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4      16376  9 iptable_nat,nf_nat        
nf_conntrack           80832  7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4                                                                                                      
nf_defrag_ipv4          2400  1 nf_conntrack_ipv4                                                                 
iptable_mangle          4192  1                                                                                   
snd_virtuoso           15652  3                                                                                   
snd_oxygen_lib         38144  1 snd_virtuoso                                                                      
snd_pcm_oss            44704  0                                                                                   
snd_mixer_oss          18976  1 snd_pcm_oss                                                                       
snd_pcm                93160  2 snd_oxygen_lib,snd_pcm_oss                                                        
snd_page_alloc         10928  1 snd_pcm                                                                           
snd_mpu401_uart         8480  1 snd_oxygen_lib                                                                    
iptable_filter          3872  1                                                                                   
ip_tables              21200  3 iptable_nat,iptable_mangle,iptable_filter                                         
x_tables               25832  10 xt_multiport,xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,xt_DSCP,ipt_REJECT,xt_state,iptable_nat,ip_tables                                                                                           
coretemp                7072  0                                                                                   
snd_seq_dummy           3460  0                                                                                   
w83627ehf              25392  0                                                                                   
hwmon_vid               3968  1 w83627ehf                                                                         
sbp2                   27180  0                                                                                   
lp                     11908  0                                                                                   
snd_seq_oss            33440  0                                                                                   
parport                40528  2 ppdev,lp                                                                          
snd_seq_midi            8192  0                                                                                   
snd_rawmidi            27360  2 snd_mpu401_uart,snd_seq_midi                                                      
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi                                                          
snd_seq                60608  7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event                         
snd_timer              26992  2 snd_pcm,snd_seq
snd_seq_device          8308  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    77096  18 snd_virtuoso,snd_oxygen_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               9088  1 snd
joydev                 13088  0
psmouse                57124  0
serio_raw               6596  0
nvidia              10316904  36
shpchp                 37756  0
raid10                 24384  0
raid1                  25408  0
raid0                   8420  0
multipath               9252  0
linear                  5668  0
dm_raid45              78504  0
raid456                58112  1
raid6_pq               81184  1 raid456
async_xor               4160  1 raid456
async_memcpy            2528  1 raid456
async_tx                4096  3 raid456,async_xor,async_memcpy
xor                     5456  3 dm_raid45,raid456,async_xor
usb_storage            65984  0
usbhid                 43968  2
ohci1394               33780  0
ieee1394              100896  2 sbp2,ohci1394
r8169                  38884  0
mii                     6368  1 r8169
intel_agp              32816  0
    Advanced reply Adv Reply  
  2. November 17th, 2009 #2
    eyelessfade
    eyelessfade is offline Tea Glorious Tea!
    Join Date
    Feb 2006
    Location
    Norway
    Beans
    304
    Distro
    Kubuntu Development Release

    Re: Black Screen of death?

    dmesg:
    Code:
    [    0.000000] Initializing cgroup subsys cpuset                                                                  
[    0.000000] Initializing cgroup subsys cpu                                                                     
[    0.000000] Linux version 2.6.31-15-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:53:52 UTC 2009 (Ubuntu 2.6.31-15.50-generic)                                               
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-15-generic root=UUID=f148c5da-e436-4796-b0be-3de5ca4c747e ro quiet splash                                                                                                   
[    0.000000] KERNEL supported cpus:                                                                             
[    0.000000]   Intel GenuineIntel                                                                               
[    0.000000]   AMD AuthenticAMD                                                                                 
[    0.000000]   Centaur CentaurHauls                                                                             
[    0.000000] BIOS-provided physical RAM map:                                                                    
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)                                           
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)                                         
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)                                         
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)                                           
[    0.000000]  BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)                                         
[    0.000000]  BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)                                        
[    0.000000]  BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)                                         
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)                                         
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)                                         
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)                                           
[    0.000000] DMI 2.5 present.                                                                                   
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.                                
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)                     
[    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000                                                     
[    0.000000] MTRR default type: uncachable                                                                      
[    0.000000] MTRR fixed ranges enabled:                                                                         
[    0.000000]   00000-9FFFF write-back                                                                           
[    0.000000]   A0000-BFFFF uncachable                                                                           
[    0.000000]   C0000-CBFFF write-protect                                                                        
[    0.000000]   CC000-EFFFF uncachable                                                                           
[    0.000000]   F0000-FFFFF write-through                                                                        
[    0.000000] MTRR variable ranges enabled:                                                                      
[    0.000000]   0 base 100000000 mask F00000000 write-back                                                       
[    0.000000]   1 base 200000000 mask FE0000000 write-back                                                       
[    0.000000]   2 base 220000000 mask FF0000000 write-back                                                       
[    0.000000]   3 base 000000000 mask F80000000 write-back                                                       
[    0.000000]   4 base 080000000 mask FC0000000 write-back                                                       
[    0.000000]   5 base 0C0000000 mask FF0000000 write-back                                                       
[    0.000000]   6 base 0CFF00000 mask FFFF00000 uncachable                                                       
[    0.000000]   7 disabled                                                                                       
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106                                   
[    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)                     
[    0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000                                                      
[    0.000000] Scanning 0 areas for low memory corruption                                                         
[    0.000000] modified physical RAM map:                                                                         
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)                                          
[    0.000000]  modified: 0000000000010000 - 000000000009bc00 (usable)                                            
[    0.000000]  modified: 000000000009bc00 - 00000000000a0000 (reserved)                                          
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)                                          
[    0.000000]  modified: 0000000000100000 - 00000000cfee0000 (usable)                                            
[    0.000000]  modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)                                          
[    0.000000]  modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)                                         
[    0.000000]  modified: 00000000cfef0000 - 00000000cff00000 (reserved)                                          
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)                                          
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)                                          
[    0.000000]  modified: 0000000100000000 - 0000000230000000 (usable)                                            
[    0.000000] initial memory mapped : 0 - 20000000                                                               
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000                                             
[    0.000000] NX (Execute Disable) protection: active                                                            
[    0.000000]  0000000000 - 00cfe00000 page 2M                                                                   
[    0.000000]  00cfe00000 - 00cfee0000 page 4k                                                                   
[    0.000000] kernel direct mapping tables up to cfee0000 @ 10000-16000                                          
[    0.000000] init_memory_mapping: 0000000100000000-0000000230000000                                             
[    0.000000] NX (Execute Disable) protection: active                                                            
[    0.000000]  0100000000 - 0230000000 page 2M                                                                   
[    0.000000] kernel direct mapping tables up to 230000000 @ 14000-1e000                                         
[    0.000000] RAMDISK: 37780000 - 37fef652                                                                       
[    0.000000] ACPI: RSDP 00000000000f7860 00014 (v00 IntelR)                                                     
[    0.000000] ACPI: RSDT 00000000cfee3000 00034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)                     
[    0.000000] ACPI: FACP 00000000cfee3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)                     
[    0.000000] ACPI: DSDT 00000000cfee3100 04D0B (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)                     
[    0.000000] ACPI: FACS 00000000cfee0000 00040                                                                  
[    0.000000] ACPI: MCFG 00000000cfee7f00 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)                     
[    0.000000] ACPI: APIC 00000000cfee7e40 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)                     
[    0.000000] ACPI: SSDT 00000000cfee85a0 00380 (v01  PmRef    CpuPm 00003000 INTL 20041203)                     
[    0.000000] ACPI: Local APIC address 0xfee00000                                                                
[    0.000000] No NUMA configuration found                                                                        
[    0.000000] Faking a node at 0000000000000000-0000000230000000                                                 
[    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000                                             
[    0.000000]   NODE_DATA [0000000000019000 - 000000000001dfff]                                                  
[    0.000000]   bootmap [000000000001e000 -  0000000000063fff] pages 46                                          
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]                                       
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]                      
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]                      
[    0.000000]   #2 [0001000000 - 00019e4ccc]    TEXT DATA BSS ==> [0001000000 - 00019e4ccc]                      
[    0.000000]   #3 [0037780000 - 0037fef652]          RAMDISK ==> [0037780000 - 0037fef652]                      
[    0.000000]   #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]                      
[    0.000000]   #5 [00019e5000 - 00019e50f6]              BRK ==> [00019e5000 - 00019e50f6]                      
[    0.000000]   #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]                      
[    0.000000]   #7 [0000014000 - 0000019000]          PGTABLE ==> [0000014000 - 0000019000]                      
[    0.000000] found SMP MP-table at [ffff8800000f36b0] f36b0                                                     
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0          
[    0.000000] Zone PFN ranges:                                                                                   
[    0.000000]   DMA      0x00000010 -> 0x00001000                                                                
[    0.000000]   DMA32    0x00001000 -> 0x00100000                                                                
[    0.000000]   Normal   0x00100000 -> 0x00230000                                                                
[    0.000000] Movable zone start PFN for each node                                                               
[    0.000000] early_node_map[3] active PFN ranges                                                                
[    0.000000]     0: 0x00000010 -> 0x0000009b                                                                    
[    0.000000]     0: 0x00000100 -> 0x000cfee0                                                                    
[    0.000000]     0: 0x00100000 -> 0x00230000                                                                    
[    0.000000] On node 0 totalpages: 2096747                                                                      
[    0.000000]   DMA zone: 56 pages used for memmap                                                               
[    0.000000]   DMA zone: 112 pages reserved                                                                     
[    0.000000]   DMA zone: 3811 pages, LIFO batch:0                                                               
[    0.000000]   DMA32 zone: 14280 pages used for memmap                                                          
[    0.000000]   DMA32 zone: 833304 pages, LIFO batch:31                                                          
[    0.000000]   Normal zone: 17024 pages used for memmap                                                         
[    0.000000]   Normal zone: 1228160 pages, LIFO batch:31                                                        
[    0.000000] ACPI: PM-Timer IO Port: 0x408                                                                      
[    0.000000] ACPI: Local APIC address 0xfee00000                                                                
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)                                                 
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)                                                 
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)                                                
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)                                                
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])                                                
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])                                                
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])                                                
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])                                                
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])                                            
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23                                     
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)                                           
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)                                        
[    0.000000] ACPI: IRQ0 used by override.                                                                       
[    0.000000] ACPI: IRQ2 used by override.                                                                       
[    0.000000] ACPI: IRQ9 used by override.                                                                       
[    0.000000] Using ACPI (MADT) for SMP configuration information                                                
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs                                                               
[    0.000000] nr_irqs_gsi: 24                                                                                    
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000                                  
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000                                  
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000                                  
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000                                  
[    0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000                                  
[    0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000                                  
[    0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000                                  
[    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000                                  
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000                                  
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000                                  
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000                                  
[    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)                             
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1                                           
[    0.000000] PERCPU: Embedded 30 pages at ffff880028034000, static data 90720 bytes                             
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065275                       
[    0.000000] Policy zone: Normal                                                                                
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-15-generic root=UUID=f148c5da-e436-4796-b0be-3de5ca4c747e ro quiet splash                                                                                            
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)                                              
[    0.000000] Initializing CPU#0                                                                                 
[    0.000000] Checking aperture...                                                                               
[    0.000000] No AGP bridge found                                                                                
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area                                                      
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!                                      
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)                                          
[    0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000                           
[    0.000000] software IO TLB at phys 0x20000000 - 0x24000000                                                    
[    0.000000] Memory: 8184716k/9175040k available (5315k kernel code, 788052k absent, 202272k reserved, 3018k data, 660k init)                                                                                                     
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1                            
[    0.000000] NR_IRQS:4352 nr_irqs:440                                                                           
[    0.000000] Fast TSC calibration using PIT                                                                     
[    0.000000] Detected 3006.039 MHz processor.                                                                   
[    0.002652] Console: colour VGA+ 80x25                                                                         
[    0.002654] console [tty0] enabled                                                                             
[    0.010000] allocated 83886080 bytes of page_cgroup                                                            
[    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups                         
[    0.010010] Calibrating delay loop (skipped), value calculated using timer frequency.. 6012.07 BogoMIPS (lpj=30060390)                                                                                                           
[    0.010034] Security Framework initialized                                                                     
[    0.010052] AppArmor: AppArmor initialized                                                                     
[    0.010541] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)                                
[    0.013932] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)                                  
[    0.015539] Mount-cache hash table entries: 256                                                                
[    0.015660] Initializing cgroup subsys ns                                                                      
[    0.015665] Initializing cgroup subsys cpuacct                                                                 
[    0.015667] Initializing cgroup subsys memory                                                                  
[    0.015673] Initializing cgroup subsys freezer                                                                 
[    0.015674] Initializing cgroup subsys net_cls                                                                 
[    0.015686] CPU: L1 I cache: 32K, L1 D cache: 32K                                                              
[    0.015687] CPU: L2 cache: 6144K                                                                               
[    0.015690] CPU 0/0x0 -> Node 0                                                                                
[    0.015692] CPU: Physical Processor ID: 0                                                                      
[    0.015692] CPU: Processor Core ID: 0                                                                          
[    0.015695] mce: CPU supports 6 MCE banks                                                                      
[    0.015700] CPU0: Thermal monitoring enabled (TM2)                                                             
[    0.015703] using mwait in idle threads.                                                                       
[    0.015705] Performance Counters: Core2 events, Intel PMU driver.                                              
[    0.015709] ... version:                 2                                                                     
[    0.015710] ... bit width:               40                                                                    
[    0.015711] ... generic counters:        2                                                                     
[    0.015712] ... value mask:              000000ffffffffff                                                      
[    0.015713] ... max period:              000000007fffffff                                                      
[    0.015714] ... fixed-purpose counters:  3                                                                     
[    0.015715] ... counter mask:            0000000700000003                                                      
[    0.017641] ACPI: Core revision 20090521                                                                       
[    0.025382] Setting APIC routing to flat                                                                       
[    0.025679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1                                               
[    0.125695] CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06                                  
[    0.130000] Booting processor 1 APIC 0x1 ip 0x6000                                                             
[    0.010000] Initializing CPU#1                                                                                 
[    0.010000] Calibrating delay using timer specific routine.. 6012.12 BogoMIPS (lpj=30060615)                   
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K                                                              
[    0.010000] CPU: L2 cache: 6144K                                                                               
[    0.010000] CPU 1/0x1 -> Node 0                                                                                
[    0.010000] CPU: Physical Processor ID: 0                                                                      
[    0.010000] CPU: Processor Core ID: 1                                                                          
[    0.010000] mce: CPU supports 6 MCE banks                                                                      
[    0.010000] CPU1: Thermal monitoring enabled (TM2)                                                             
[    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106                                   
[    0.281491] CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06                                  
[    0.281498] checking TSC synchronization [CPU#0 -> CPU#1]: passed.                                             
[    0.290018] Brought up 2 CPUs                                                                                  
[    0.290020] Total of 2 processors activated (12024.20 BogoMIPS).                                               
[    0.290070] CPU0 attaching sched-domain:                                                                       
[    0.290073]  domain 0: span 0-1 level MC                                                                       
[    0.290074]   groups: 0 1                                                                                      
[    0.290078] CPU1 attaching sched-domain:                                                                       
[    0.290079]  domain 0: span 0-1 level MC                                                                       
[    0.290080]   groups: 1 0                                                                                      
[    0.290133] Booting paravirtualized kernel on bare hardware                                                    
[    0.290133] regulator: core version 0.5                                                                        
[    0.290133] Time:  1:05:03  Date: 11/17/09                                                                     
[    0.290133] NET: Registered protocol family 16                                                                 
[    0.290156] ACPI: bus type pci registered                                                                      
[    0.290207] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255                                   
[    0.290209] PCI: MCFG area at e0000000 reserved in E820                                                        
[    0.294965] PCI: Using MMCONFIG at e0000000 - efffffff                                                         
[    0.294967] PCI: Using configuration type 1 for base access                                                    
[    0.295526] bio: create slab <bio-0> at 0                                                                      
[    0.295526] ACPI: EC: Look up EC in DSDT                                                                       
[    0.302304] ACPI: Interpreter enabled                                                                          
[    0.302307] ACPI: (supports S0 S3 S4 S5)                                                                       
[    0.302321] ACPI: Using IOAPIC for interrupt routing                                                           
[    0.305603] ACPI: ACPI Dock Station Driver: 1 docks/bays found                                                 
[    0.305680] ACPI: PCI Root Bridge [PCI0] (0000:00)                                                             
[    0.305747] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold                                              
[    0.305750] pci 0000:00:01.0: PME# disabled                                                                    
[    0.305804] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f]                                                  
[    0.305857] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f]                                                  
[    0.305911] pci 0000:00:1a.2: reg 20 io port: [0xfd00-0xfd1f]                                                  
[    0.305957] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]                                       
[    0.305993] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold                                              
[    0.305996] pci 0000:00:1a.7: PME# disabled                                                                    
[    0.306039] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold                                              
[    0.306042] pci 0000:00:1c.0: PME# disabled                                                                    
[    0.306089] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold                                              
[    0.306092] pci 0000:00:1c.4: PME# disabled                                                                    
[    0.306136] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold                                              
[    0.306139] pci 0000:00:1c.5: PME# disabled                                                                    
[    0.306180] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f]                                                  
[    0.306234] pci 0000:00:1d.1: reg 20 io port: [0xfb00-0xfb1f]                                                  
[    0.306287] pci 0000:00:1d.2: reg 20 io port: [0xfa00-0xfa1f]                                                  
[    0.306333] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]                                       
[    0.306369] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold                                              
[    0.306372] pci 0000:00:1d.7: PME# disabled                                                                    
[    0.306466] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000                                                 
[    0.306469] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO                            
[    0.306472] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO                                     
[    0.306476] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 000f)                             
[    0.306478] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 000f)                             
[    0.306527] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907]                                                  
[    0.306531] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803]                                                  
[    0.306535] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707]                                                  
[    0.306540] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603]                                                  
[    0.306544] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf51f]                                                  
[    0.306548] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffd000-0xfdffd7ff]                                       
[    0.306571] pci 0000:00:1f.2: PME# supported from D3hot                                                        
[    0.306574] pci 0000:00:1f.2: PME# disabled                                                                    
[    0.306595] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]                                       
[    0.306605] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]                                                    
[    0.306639] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]                                       
[    0.306645] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]                                       
[    0.306652] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]                                       
[    0.306655] pci 0000:01:00.0: reg 24 io port: [0x9f00-0x9f7f]                                                  
[    0.306659] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]                                           
[    0.306703] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]                                                  
[    0.306705] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]                                       
[    0.306708] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]                                  
[    0.306739] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]                                                  
[    0.306741] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]                                       
[    0.306746] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]                                  
[    0.306823] pci 0000:03:00.0: reg 24 32bit mmio: [0xfd8fe000-0xfd8fffff]                                       
[    0.306830] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]                                           
[    0.306858] pci 0000:03:00.0: PME# supported from D3hot                                                        
[    0.306862] pci 0000:03:00.0: PME# disabled                                                                    
[    0.306908] pci 0000:03:00.1: reg 10 io port: [0xcf00-0xcf07]                                                  
[    0.306915] pci 0000:03:00.1: reg 14 io port: [0xce00-0xce03]                                                  
[    0.306923] pci 0000:03:00.1: reg 18 io port: [0xcd00-0xcd07]                                                  
[    0.306930] pci 0000:03:00.1: reg 1c io port: [0xcc00-0xcc03]                                                  
[    0.306937] pci 0000:03:00.1: reg 20 io port: [0xcb00-0xcb0f]                                                  
[    0.307014] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]                                                  
[    0.307017] pci 0000:00:1c.4: bridge 32bit mmio: [0xfd800000-0xfd8fffff]                                       
[    0.307021] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]                                  
[    0.307157] pci 0000:00:1c.5: bridge io port: [0xa000-0xafff]                                                  
[    0.307160] pci 0000:00:1c.5: bridge 32bit mmio: [0xfde00000-0xfdefffff]                                       
[    0.307164] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]                                  
[    0.307226] pci 0000:05:04.0: reg 10 io port: [0xae00-0xaeff]                                                  
[    0.307308] pci 0000:05:04.0: supports D1 D2                                                                   
[    0.307379] pci 0000:04:00.0: bridge io port: [0xa000-0xafff]                                                  
[    0.307384] pci 0000:04:00.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]                                       
[    0.307389] pci 0000:04:00.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]                                  
[    0.307426] pci 0000:06:00.0: reg 10 io port: [0xba00-0xbaff]                                                  
[    0.307431] pci 0000:06:00.0: reg 14 32bit mmio: [0xfdbff000-0xfdbff0ff]                                       
[    0.307451] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]                                           
[    0.307466] pci 0000:06:00.0: supports D1 D2                                                                   
[    0.307467] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold                                           
[    0.307470] pci 0000:06:00.0: PME# disabled                                                                    
[    0.307497] pci 0000:06:01.0: reg 10 io port: [0xbc00-0xbcff]                                                  
[    0.307503] pci 0000:06:01.0: reg 14 32bit mmio: [0xfdbfe000-0xfdbfe0ff]                                       
[    0.307523] pci 0000:06:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]                                           
[    0.307538] pci 0000:06:01.0: supports D1 D2                                                                   
[    0.307539] pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold                                           
[    0.307542] pci 0000:06:01.0: PME# disabled                                                                    
[    0.307569] pci 0000:06:02.0: reg 10 32bit mmio: [0xfdbfd000-0xfdbfd7ff]                                       
[    0.307575] pci 0000:06:02.0: reg 14 32bit mmio: [0xfdbf8000-0xfdbfbfff]                                       
[    0.307610] pci 0000:06:02.0: supports D1 D2                                                                   
[    0.307612] pci 0000:06:02.0: PME# supported from D0 D1 D2 D3hot                                               
[    0.307615] pci 0000:06:02.0: PME# disabled                                                                    
[    0.307642] pci 0000:06:03.0: reg 10 io port: [0xbf00-0xbf7f]                                                  
[    0.307652] pci 0000:06:03.0: reg 18 io port: [0xb800-0xb8ff]                                                  
[    0.307657] pci 0000:06:03.0: reg 1c 32bit mmio: [0xfdbfc000-0xfdbfcfff]                                       
[    0.307662] pci 0000:06:03.0: reg 20 32bit mmio: [0xfdbc0000-0xfdbdffff]                                       
[    0.307672] pci 0000:06:03.0: reg 30 32bit mmio: [0x000000-0x007fff]                                           
[    0.307687] pci 0000:06:03.0: supports D1                                                                      
[    0.307723] pci 0000:00:1e.0: transparent bridge                                                               
[    0.307725] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]                                                  
[    0.307728] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]                                       
[    0.307732] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]                                  
[    0.307750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]                                                
[    0.307832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]                                           
[    0.307876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]                                           
[    0.307917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]                                           
[    0.307954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]                                           
[    0.318610] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 9 10 11 12)                                           
[    0.318686] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 *10 11 12)                                           
[    0.318761] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 *10 11 12)                                           
[    0.318835] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12)                                           
[    0.318909] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12) *0, disabled.                              
[    0.318984] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 9 10 *11 12)                                           
[    0.319059] ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 *7 9 10 11 12)                                           
[    0.319133] ACPI: PCI Interrupt Link [LNK1] (IRQs *4 5 7 9 10 11 12)                                           
[    0.319243] SCSI subsystem initialized                                                                         
[    0.319256] libata version 3.00 loaded.                                                                        
[    0.319256] usbcore: registered new interface driver usbfs                                                     
[    0.319256] usbcore: registered new interface driver hub                                                       
[    0.319256] usbcore: registered new device driver usb                                                          
[    0.319256] ACPI: WMI: Mapper loaded                                                                           
[    0.319256] PCI: Using ACPI for IRQ routing                                                                    
[    0.340006] Bluetooth: Core ver 2.15                                                                           
[    0.340020] NET: Registered protocol family 31                                                                 
[    0.340020] Bluetooth: HCI device and connection manager initialized                                           
[    0.340020] Bluetooth: HCI socket layer initialized                                                            
[    0.340020] NetLabel: Initializing                                                                             
[    0.340020] NetLabel:  domain hash size = 128                                                                  
[    0.340020] NetLabel:  protocols = UNLABELED CIPSOv4                                                           
[    0.340031] NetLabel:  unlabeled traffic allowed by default                                                    
[    0.340149] hpet clockevent registered                                                                         
[    0.340151] HPET: 4 timers in total, 0 timers will be used for per-cpu timer                                   
[    0.340155] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0                                                         
[    0.340158] hpet0: 4 comparators, 64-bit 14.318180 MHz counter                                                 
[    0.380007] pnp: PnP ACPI init                                                                                 
[    0.380015] ACPI: bus type pnp registered                                                                      
[    0.381550] pnp: PnP ACPI: found 11 devices                                                                    
[    0.381551] ACPI: ACPI bus type pnp unregistered                                                               
[    0.381558] system 00:01: ioport range 0x4d0-0x4d1 has been reserved                                           
[    0.381560] system 00:01: ioport range 0x880-0x88f has been reserved                                           
[    0.381564] system 00:06: ioport range 0x400-0x4bf could not be reserved                                       
[    0.381568] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved                                  
[    0.381572] system 00:0a: iomem range 0xf0000-0xfffff could not be reserved                                    
[    0.381574] system 00:0a: iomem range 0xcff00000-0xcfffffff could not be reserved                              
[    0.381575] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved                              
[    0.381577] system 00:0a: iomem range 0x0-0x9ffff could not be reserved                                        
[    0.381579] system 00:0a: iomem range 0x100000-0xcfedffff could not be reserved                                
[    0.381581] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved                              
[    0.381583] system 00:0a: iomem range 0xfed14000-0xfed1dfff has been reserved                                  
[    0.381585] system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved                                  
[    0.381587] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved                                  
[    0.381589] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved                                  
[    0.381590] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved                                  
[    0.381592] system 00:0a: iomem range 0xe0000-0xeffff has been reserved                                        
[    0.386200] AppArmor: AppArmor Filesystem Enabled                                                              
[    0.386240] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01                                                
[    0.386242] pci 0000:00:01.0:   IO window: 0x9000-0x9fff                                                       
[    0.386245] pci 0000:00:01.0:   MEM window: 0xf8000000-0xfbffffff                                              
[    0.386247] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff                             
[    0.386250] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02                                                
[    0.386252] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff                                                       
[    0.386256] pci 0000:00:1c.0:   MEM window: 0xfdc00000-0xfdcfffff                                              
[    0.386258] pci 0000:00:1c.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff                             
[    0.386263] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03                                                
[    0.386265] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff                                                       
[    0.386269] pci 0000:00:1c.4:   MEM window: 0xfd800000-0xfd8fffff                                              
[    0.386272] pci 0000:00:1c.4:   PREFETCH window: 0x000000fd700000-0x000000fd7fffff                             
[    0.386276] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05                                                
[    0.386279] pci 0000:04:00.0:   IO window: 0xa000-0xafff                                                       
[    0.386287] pci 0000:04:00.0:   MEM window: 0xfde00000-0xfdefffff                                              
[    0.386292] pci 0000:04:00.0:   PREFETCH window: 0xfdd00000-0xfddfffff                                         
[    0.386297] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04                                                
[    0.386299] pci 0000:00:1c.5:   IO window: 0xa000-0xafff                                                       
[    0.386303] pci 0000:00:1c.5:   MEM window: 0xfde00000-0xfdefffff                                              
[    0.386306] pci 0000:00:1c.5:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff                             
[    0.386311] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06                                                
[    0.386313] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff                                                       
[    0.386316] pci 0000:00:1e.0:   MEM window: 0xfdb00000-0xfdbfffff                                              
[    0.386319] pci 0000:00:1e.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff                             
[    0.386327]   alloc irq_desc for 16 on node 0                                                                  
[    0.386329]   alloc kstat_irqs on node 0                                                                       
[    0.386332] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                       
[    0.386334] pci 0000:00:01.0: setting latency timer to 64                                                      
[    0.386339] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                       
[    0.386342] pci 0000:00:1c.0: setting latency timer to 64                                                      
[    0.386346] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                       
[    0.386349] pci 0000:00:1c.4: setting latency timer to 64                                                      
[    0.386354]   alloc irq_desc for 17 on node 0                                                                  
[    0.386355]   alloc kstat_irqs on node 0                                                                       
[    0.386357] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17                                       
[    0.386359] pci 0000:00:1c.5: setting latency timer to 64                                                      
[    0.386364] pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17                                       
[    0.386369] pci 0000:04:00.0: setting latency timer to 64                                                      
[    0.386375] pci 0000:00:1e.0: setting latency timer to 64                                                      
[    0.386377] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]                                                     
[    0.386379] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]                                     
[    0.386381] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]                                                   
[    0.386382] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]                                           
[    0.386384] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]                                       
[    0.386386] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]                                                   
[    0.386387] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]                                           
[    0.386389] pci_bus 0000:02: resource 2 pref mem [0xfd900000-0xfd9fffff]                                       
[    0.386390] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]                                                   
[    0.386392] pci_bus 0000:03: resource 1 mem: [0xfd800000-0xfd8fffff]                                           
[    0.386393] pci_bus 0000:03: resource 2 pref mem [0xfd700000-0xfd7fffff]                                       
[    0.386395] pci_bus 0000:04: resource 0 io:  [0xa000-0xafff]                                                   
[    0.386396] pci_bus 0000:04: resource 1 mem: [0xfde00000-0xfdefffff]                                           
[    0.386398] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff]                                       
[    0.386399] pci_bus 0000:05: resource 0 io:  [0xa000-0xafff]                                                   
[    0.386401] pci_bus 0000:05: resource 1 mem: [0xfde00000-0xfdefffff]                                           
[    0.386402] pci_bus 0000:05: resource 2 pref mem [0xfdd00000-0xfddfffff]                                       
[    0.386404] pci_bus 0000:06: resource 0 io:  [0xb000-0xbfff]                                                   
[    0.386405] pci_bus 0000:06: resource 1 mem: [0xfdb00000-0xfdbfffff]                                           
[    0.386407] pci_bus 0000:06: resource 2 pref mem [0xfda00000-0xfdafffff]                                       
[    0.386408] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]                                                     
[    0.386410] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]                                     
[    0.386428] NET: Registered protocol family 2                                                                  
[    0.386596] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)                                
[    0.387462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)                              
[    0.390308] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)                                       
[    0.390707] TCP: Hash tables configured (established 524288 bind 65536)                                        
[    0.390709] TCP reno registered                                                                                
[    0.390802] NET: Registered protocol family 1                                                                  
[    0.390851] Trying to unpack rootfs image as initramfs...                                                      
[   12.202258] Freeing initrd memory: 8637k freed                                                                 
[   12.204690] Scanning for low memory corruption every 60 seconds                                                
[   12.204798] audit: initializing netlink socket (disabled)                                                      
[   12.204811] type=2000 audit(1258419914.200:1): initialized                                                     
[   12.211747] HugeTLB registered 2 MB page size, pre-allocated 0 pages                                           
[   12.212684] VFS: Disk quotas dquot_6.5.2                                                                       
[   12.212725] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)                                          
[   12.213124] fuse init (API version 7.12)                                                                       
[   12.213177] msgmni has been set to 16002                                                                       
[   12.213321] alg: No test for stdrng (krng)                                                                     
[   12.213330] io scheduler noop registered                                                                       
[   12.213331] io scheduler anticipatory registered                                                               
[   12.213333] io scheduler deadline registered                                                                   
[   12.213360] io scheduler cfq registered (default)                                                              
[   12.213481] pci 0000:01:00.0: Boot video device                                                                
[   12.213577]   alloc irq_desc for 24 on node 0                                                                  
[   12.213578]   alloc kstat_irqs on node 0                                                                       
[   12.213585] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X                                                 
[   12.213589] pcieport-driver 0000:00:01.0: setting latency timer to 64                                          
[   12.213673]   alloc irq_desc for 25 on node 0                                                                  
[   12.213675]   alloc kstat_irqs on node 0                                                                       
[   12.213680] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X                                                 
[   12.213685] pcieport-driver 0000:00:1c.0: setting latency timer to 64                                          
[   12.213782]   alloc irq_desc for 26 on node 0                                                                  
[   12.213783]   alloc kstat_irqs on node 0                                                                       
[   12.213788] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X                                                 
[   12.213794] pcieport-driver 0000:00:1c.4: setting latency timer to 64                                          
[   12.213891]   alloc irq_desc for 27 on node 0                                                                  
[   12.213892]   alloc kstat_irqs on node 0                                                                       
[   12.213897] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X                                                 
[   12.213903] pcieport-driver 0000:00:1c.5: setting latency timer to 64                                          
[   12.214000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5                                                    
[   12.214077] pciehp: PCI Express Hot Plug Controller Driver version: 0.4                                        
[   12.214162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0                               
[   12.214165] ACPI: Power Button [PWRF]                                                                          
[   12.214200] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1                      
[   12.214202] ACPI: Power Button [PWRB]                                                                          
[   12.214596] ACPI: SSDT 00000000cfee7f80 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)                     
[   12.214734] processor LNXCPU:00: registered as cooling_device0                                                 
[   12.214895] ACPI: SSDT 00000000cfee8440 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)                     
[   12.215017] processor LNXCPU:01: registered as cooling_device1                                                 
[   12.218209] thermal LNXTHERM:01: registered as thermal_zone0                                                   
[   12.218214] ACPI: Thermal Zone [THRM] (20 C)                                                                   
[   12.218913] Linux agpgart interface v0.103                                                                     
[   12.218919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled                                            
[   12.219713] brd: module loaded                                                                                 
[   12.220000] loop: module loaded                                                                                
[   12.220073] input: Macintosh mouse button emulation as /devices/virtual/input/input2                           
[   12.220132] ahci 0000:00:1f.2: version 3.0                                                                     
[   12.220142]   alloc irq_desc for 19 on node 0                                                                  
[   12.220143]   alloc kstat_irqs on node 0                                                                       
[   12.220146] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19                                      
[   12.220166]   alloc irq_desc for 28 on node 0                                                                  
[   12.220167]   alloc kstat_irqs on node 0                                                                       
[   12.220172] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X                                                            
[   12.220230] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode                      
[   12.220232] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems                                 
[   12.220235] ahci 0000:00:1f.2: setting latency timer to 64                                                     
[   12.320061] scsi0 : ahci                                                                                       
[   12.320132] scsi1 : ahci                                                                                       
[   12.320170] scsi2 : ahci                                                                                       
[   12.320203] scsi3 : ahci                                                                                       
[   12.320240] scsi4 : ahci                                                                                       
[   12.320274] scsi5 : ahci                                                                                       
[   12.320356] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 28                               
[   12.320359] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 28                               
[   12.320361] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 28                               
[   12.320362] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 28                               
[   12.320364] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 28                               
[   12.320366] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 28                               
[   12.320407] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                      
[   12.340054] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode                       
[   12.340057] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part                                   
[   12.340063] ahci 0000:03:00.0: setting latency timer to 64                                                     
[   12.340180] scsi6 : ahci                                                                                       
[   12.340215] scsi7 : ahci                                                                                       
[   12.340260] ata7: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe100 irq 16                               
[   12.340263] ata8: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe180 irq 16                               
[   12.340330] sata_promise 0000:06:03.0: version 2.12                                                            
[   12.340337]   alloc irq_desc for 22 on node 0                                                                  
[   12.340338]   alloc kstat_irqs on node 0                                                                       
[   12.340341] sata_promise 0000:06:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22                              
[   12.340430] scsi8 : sata_promise                                                                               
[   12.340465] scsi9 : sata_promise                                                                               
[   12.340498] scsi10 : sata_promise                                                                              
[   12.340533] scsi11 : sata_promise                                                                              
[   12.340557] ata9: SATA max UDMA/133 mmio m4096@0xfdbfc000 ata 0xfdbfc380 irq 22                                
[   12.340560] ata10: SATA max UDMA/133 mmio m4096@0xfdbfc000 ata 0xfdbfc280 irq 22                               
[   12.340562] ata11: SATA max UDMA/133 mmio m4096@0xfdbfc000 ata 0xfdbfc200 irq 22                               
[   12.340565] ata12: SATA max UDMA/133 mmio m4096@0xfdbfc000 ata 0xfdbfc300 irq 22                               
[   12.340810] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17                              
[   12.340829] pata_jmicron 0000:03:00.1: setting latency timer to 64                                             
[   12.341089] scsi12 : pata_jmicron                                                                              
[   12.341129] scsi13 : pata_jmicron                                                                              
[   12.341156] ata13: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 17                                 
[   12.341158] ata14: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 17                                 
[   12.341501] Fixed MDIO Bus: probed                                                                             
[   12.341522] PPP generic driver version 2.4.2                                                                   
[   12.341578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                                         
[   12.341609]   alloc irq_desc for 18 on node 0                                                                  
[   12.341610]   alloc kstat_irqs on node 0                                                                       
[   12.341613] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                  
[   12.341620] ehci_hcd 0000:00:1a.7: setting latency timer to 64                                                 
[   12.341622] ehci_hcd 0000:00:1a.7: EHCI Host Controller                                                        
[   12.341659] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1                               
[   12.345545] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported                                      
[   12.345554] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000                                                   
[   12.360034] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00                                                  
[   12.360101] usb usb1: configuration #1 chosen from 1 choice                                                    
[   12.360129] hub 1-0:1.0: USB hub found                                                                         
[   12.360140] hub 1-0:1.0: 6 ports detected                                                                      
[   12.360197]   alloc irq_desc for 23 on node 0                                                                  
[   12.360198]   alloc kstat_irqs on node 0                                                                       
[   12.360201] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23                                  
[   12.360208] ehci_hcd 0000:00:1d.7: setting latency timer to 64                                                 
[   12.360210] ehci_hcd 0000:00:1d.7: EHCI Host Controller                                                        
[   12.360231] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2                               
[   12.364135] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported                                      
[   12.364144] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000                                                   
[   12.380032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00                                                  
[   12.380084] usb usb2: configuration #1 chosen from 1 choice                                                    
[   12.380111] hub 2-0:1.0: USB hub found                                                                         
[   12.380117] hub 2-0:1.0: 6 ports detected                                                                      
[   12.380173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver                                             
[   12.380182] uhci_hcd: USB Universal Host Controller Interface driver                                           
[   12.380226] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                  
[   12.380230] uhci_hcd 0000:00:1a.0: setting latency timer to 64                                                 
[   12.380232] uhci_hcd 0000:00:1a.0: UHCI Host Controller                                                        
[   12.380251] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3                               
[   12.380272] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00                                                  
[   12.380323] usb usb3: configuration #1 chosen from 1 choice                                                    
[   12.380339] hub 3-0:1.0: USB hub found                                                                         
[   12.380343] hub 3-0:1.0: 2 ports detected                                                                      
[   12.380390]   alloc irq_desc for 21 on node 0                                                                  
[   12.380391]   alloc kstat_irqs on node 0                                                                       
[   12.380394] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21                                  
[   12.380397] uhci_hcd 0000:00:1a.1: setting latency timer to 64                                                 
[   12.380400] uhci_hcd 0000:00:1a.1: UHCI Host Controller                                                        
[   12.380418] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4                               
[   12.380442] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00                                                  
[   12.380490] usb usb4: configuration #1 chosen from 1 choice                                                    
[   12.380506] hub 4-0:1.0: USB hub found                                                                         
[   12.380510] hub 4-0:1.0: 2 ports detected                                                                      
[   12.380556] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19                                  
[   12.380560] uhci_hcd 0000:00:1a.2: setting latency timer to 64                                                 
[   12.380562] uhci_hcd 0000:00:1a.2: UHCI Host Controller                                                        
[   12.380582] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5                               
[   12.380606] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00                                                  
[   12.380657] usb usb5: configuration #1 chosen from 1 choice                                                    
[   12.380673] hub 5-0:1.0: USB hub found                                                                         
[   12.380677] hub 5-0:1.0: 2 ports detected                                                                      
[   12.380724] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23                                  
[   12.380728] uhci_hcd 0000:00:1d.0: setting latency timer to 64                                                 
[   12.380730] uhci_hcd 0000:00:1d.0: UHCI Host Controller                                                        
[   12.380757] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6                               
[   12.380776] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00                                                  
[   12.380826] usb usb6: configuration #1 chosen from 1 choice                                                    
[   12.380842] hub 6-0:1.0: USB hub found                                                                         
[   12.380846] hub 6-0:1.0: 2 ports detected                                                                      
[   12.380890] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19                                  
[   12.380894] uhci_hcd 0000:00:1d.1: setting latency timer to 64                                                 
[   12.380896] uhci_hcd 0000:00:1d.1: UHCI Host Controller                                                        
[   12.380917] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7                               
[   12.380935] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00                                                  
[   12.380983] usb usb7: configuration #1 chosen from 1 choice                                                    
[   12.381001] hub 7-0:1.0: USB hub found                                                                         
[   12.381006] hub 7-0:1.0: 2 ports detected                                                                      
[   12.381050] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18                                  
[   12.381055] uhci_hcd 0000:00:1d.2: setting latency timer to 64                                                 
[   12.381057] uhci_hcd 0000:00:1d.2: UHCI Host Controller                                                        
[   12.381075] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8                               
[   12.381094] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00                                                  
[   12.381143] usb usb8: configuration #1 chosen from 1 choice                                                    
[   12.381161] hub 8-0:1.0: USB hub found                                                                         
[   12.381165] hub 8-0:1.0: 2 ports detected                                                                      
[   12.381229] PNP: No PS/2 controller found. Probing ports directly.                                             
[   12.383473] serio: i8042 KBD port at 0x60,0x64 irq 1                                                           
[   12.383477] serio: i8042 AUX port at 0x60,0x64 irq 12                                                          
[   12.383515] mice: PS/2 mouse device common for all mice                                                        
[   12.383576] rtc_cmos 00:03: RTC can wake from S4                                                               
[   12.383597] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0                                              
[   12.383617] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs                                           
[   12.383675] device-mapper: uevent: version 1.0.3                                                               
[   12.383727] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com                   
[   12.383766] device-mapper: multipath: version 1.1.0 loaded                                                     
[   12.383769] device-mapper: multipath round-robin: version 1.0.0 loaded                                         
[   12.383865] cpuidle: using governor ladder                                                                     
[   12.383866] cpuidle: using governor menu                                                                       
[   12.384117] TCP cubic registered                                                                               
[   12.384201] NET: Registered protocol family 10                                                                 
[   12.384488] lo: Disabled Privacy Extensions                                                                    
[   12.384675] NET: Registered protocol family 17                                                                 
[   12.384686] Bluetooth: L2CAP ver 2.13                                                                          
[   12.384688] Bluetooth: L2CAP socket layer initialized                                                          
[   12.384690] Bluetooth: SCO (Voice Link) ver 0.6                                                                
[   12.384691] Bluetooth: SCO socket layer initialized                                                            
[   12.384710] Bluetooth: RFCOMM TTY layer initialized                                                            
[   12.384712] Bluetooth: RFCOMM socket layer initialized                                                         
[   12.384713] Bluetooth: RFCOMM ver 1.11                                                                         
[   12.384977] PM: Resume from disk failed.                                                                       
[   12.384985] registered taskstats version 1                                                                     
[   12.385074]   Magic number: 1:922:53                                                                           
[   12.385123] rtc_cmos 00:03: setting system clock to 2009-11-17 01:05:15 UTC (1258419915)                       
[   12.385125] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found                                               
[   12.385126] EDD information not available.                                                                     
[   12.511549] Switched to high resolution mode on CPU 1                                                          
[   12.520035] Switched to high resolution mode on CPU 0                                                          
[   12.640021] ata9: SATA link down (SStatus 0 SControl 300)                                                      
[   12.640054] ata7: SATA link down (SStatus 0 SControl 300)                                                      
[   12.640058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)                                             
[   12.640075] ata3: SATA link down (SStatus 0 SControl 300)                                                      
[   12.640090] ata4: SATA link down (SStatus 0 SControl 300)                                                      
[   12.640105] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)                                             
[   12.640121] ata6: SATA link down (SStatus 0 SControl 300)                                                      
[   12.640143] ata8: SATA link down (SStatus 0 SControl 300)                                                      
[   12.640158] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)                                             
[   12.640165] usb 1-2: new high speed USB device using ehci_hcd and address 2                                    
[   12.640983] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100, ATAPI AN                             
[   12.641945] ata2.00: ATA-8: ST31000340AS, SD1A, max UDMA/133                                                   
[   12.641948] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)                                      
[   12.642132] ata5.00: configured for UDMA/100                                                                   
[   12.642505] ata5: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4                                         
[   12.642508] ata5: irq_stat 0x40000001                                                                          
[   12.642511] ata5: hard resetting link                                                                          
[   12.644326] ata2.00: configured for UDMA/133                                                                   
[   12.684548] ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133                                                   
[   12.684551] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)                                       
[   12.742866] ata1.00: configured for UDMA/133                                                                   
[   12.742963] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5                       
[   12.743038] sd 0:0:0:0: Attached scsi generic sg0 type 0                                                       
[   12.743063] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)                              
[   12.743091] sd 0:0:0:0: [sda] Write Protect is off                                                             
[   12.743093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00                                                          
[   12.743109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA            
[   12.743192]  sda:                                                                                              
[   12.743252] scsi 1:0:0:0: Direct-Access     ATA      ST31000340AS     SD1A PQ: 0 ANSI: 5                       
[   12.743319] sd 1:0:0:0: Attached scsi generic sg1 type 0                                                       
[   12.743343] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)                            
[   12.743371] sd 1:0:0:0: [sdb] Write Protect is off                                                             
[   12.743373] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00                                                          
[   12.743388] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA            
[   12.743459]  sdb: sdb1 sdb2 sdb3 sdb4                                                                          
[   12.763009] sd 1:0:0:0: [sdb] Attached SCSI disk                                                               
[   12.782539]  sda1 sda2                                                                                         
[   12.782701] sd 0:0:0:0: [sda] Attached SCSI disk                                                               
[   12.791638] usb 1-2: configuration #1 chosen from 1 choice                                                     
[   12.791762] hub 1-2:1.0: USB hub found                                                                         
[   12.791862] hub 1-2:1.0: 2 ports detected                                                                      
[   13.110117] usb 1-2.1: new high speed USB device using ehci_hcd and address 5                                  
[   13.220399] usb 1-2.1: configuration #1 chosen from 1 choice                                                   
[   13.220505] hub 1-2.1:1.0: USB hub found                                                                       
[   13.220608] hub 1-2.1:1.0: 4 ports detected                                                                    
[   13.300116] usb 1-2.2: new low speed USB device using ehci_hcd and address 6                                   
[   13.391263] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)                                             
[   13.393307] ata5.00: configured for UDMA/100                                                                   
[   13.393673] ata5: EH complete                                                                                  
[   13.394243] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB00 PQ: 0 ANSI: 5                       
[   13.398006] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray                              
[   13.398008] Uniform CD-ROM driver Revision: 3.20                                                               
[   13.398073] sr 4:0:0:0: Attached scsi CD-ROM sr0                                                               
[   13.398114] sr 4:0:0:0: Attached scsi generic sg2 type 5                                                       
[   13.444650] usb 1-2.2: configuration #1 chosen from 1 choice                                                   
[   13.720008] usb 4-1: new full speed USB device using uhci_hcd and address 2                                    
[   13.740040] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                            
[   13.862387] ata10.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133                                       
[   13.862391] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)                                      
[   13.882432] ata10.00: configured for UDMA/133                                                                  
[   13.882490] scsi 9:0:0:0: Direct-Access     ATA      WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5                       
[   13.882561] sd 9:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)                           
[   13.882564] sd 9:0:0:0: Attached scsi generic sg3 type 0                                                       
[   13.882595] sd 9:0:0:0: [sdc] Write Protect is off                                                             
[   13.882597] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00                                                          
[   13.882612] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA            
[   13.882684]  sdc: sdc1                                                                                         
[   13.886915] sd 9:0:0:0: [sdc] Attached SCSI disk                                                               
[   13.939486] usb 4-1: configuration #1 chosen from 1 choice                                                     
[   14.220007] usb 4-2: new full speed USB device using uhci_hcd and address 3                                    
[   14.410479] usb 4-2: configuration #1 chosen from 1 choice                                                     
[   14.420030] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                            
[   14.460455] ata11.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133                                       
[   14.460458] ata11.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)                                      
[   14.480478] ata11.00: configured for UDMA/133                                                                  
[   14.480688] ata11: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4                                        
[   14.480689] ata11: hotplug_status 0x1                                                                          
[   14.480696] ata11: hard resetting link                                                                         
[   14.510094] usb 1-2.1.1: new high speed USB device using ehci_hcd and address 7                                
[   14.710008] usb 1-2.1.1: configuration #1 chosen from 1 choice                                                 
[   14.790092] usb 1-2.1.2: new low speed USB device using ehci_hcd and address 8                                 
[   15.012004] usb 1-2.1.2: configuration #1 chosen from 1 choice                                                 
[   15.230031] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                            
[   15.271380] ata11.00: configured for UDMA/133                                                                  
[   15.271383] ata11: EH complete                                                                                 
[   15.271440] scsi 10:0:0:0: Direct-Access     ATA      WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5                      
[   15.271508] sd 10:0:0:0: Attached scsi generic sg4 type 0                                                      
[   15.271528] sd 10:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)                          
[   15.271556] sd 10:0:0:0: [sdd] Write Protect is off                                                            
[   15.271558] sd 10:0:0:0: [sdd] Mode Sense: 00 3a 00 00                                                         
[   15.271573] sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA           
[   15.271645]  sdd: sdd1                                                                                         
[   15.299118] sd 10:0:0:0: [sdd] Attached SCSI disk                                                              
[   15.620030] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                            
[   15.720408] ata12.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133                                       
[   15.720410] ata12.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)                                      
[   15.740919] ata12.00: configured for UDMA/133                                                                  
[   15.741128] ata12: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4                                        
[   15.741130] ata12: hotplug_status 0x44                                                                         
[   15.741136] ata12: hard resetting link                                                                         
[   16.490031] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                            
[   16.530803] ata12.00: configured for UDMA/133                                                                  
[   16.530806] ata12: EH complete                                                                                 
[   16.530861] scsi 11:0:0:0: Direct-Access     ATA      WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5                      
[   16.530929] sd 11:0:0:0: Attached scsi generic sg5 type 0                                                      
[   16.530948] sd 11:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)                          
[   16.530976] sd 11:0:0:0: [sde] Write Protect is off                                                            
[   16.530978] sd 11:0:0:0: [sde] Mode Sense: 00 3a 00 00                                                         
[   16.530993] sd 11:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA           
[   16.531062]  sde: sde1                                                                                         
[   16.540481] sd 11:0:0:0: [sde] Attached SCSI disk                                                              
[   16.701403] Freeing unused kernel memory: 660k freed                                                           
[   16.701554] Write protecting the kernel read-only data: 7584k                                                  
[   16.821471] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded                                                    
[   16.821486] r8169 0000:06:00.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23                                     
[   16.821512] r8169 0000:06:00.0: no PCI Express capability                                                      
[   16.822048] eth0: RTL8169sc/8110sc at 0xffffc90000c74000, 00:50:8d:bf:87:f7, XID 18000000 IRQ 23               
[   16.822726] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded                                                    
[   16.822735] r8169 0000:06:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22                                     
[   16.822748] r8169 0000:06:01.0: no PCI Express capability                                                      
[   16.823137] eth1: RTL8169sc/8110sc at 0xffffc90000c4c000, 00:50:8d:bf:87:f8, XID 18000000 IRQ 22               
[   16.833044] ohci1394 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21                                  
[   16.838851] usbcore: registered new interface driver hiddev                                                    
[   16.844004] Initializing USB Mass Storage driver...                                                            
[   16.844087] scsi14 : SCSI emulation for USB Mass Storage devices                                               
[   16.844149] usbcore: registered new interface driver usb-storage                                               
[   16.844151] USB Mass Storage support registered.                                                               
[   16.844229] usb-storage: device found at 7                                                                     
[   16.844231] usb-storage: waiting for device to settle before scanning                                          
[   16.847920] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.0/input/input3                                                                                                     
[   16.847980] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.7-2.2/input0                                                                              
[   16.867016] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.1/input/input4                                                                                                     
[   16.867078] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.7-2.2/input1                                                                                
[   16.870620] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5     
[   16.870664] generic-usb 0003:046D:C51A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0                                                                                             
[   16.875493] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input6     
[   16.875558] generic-usb 0003:046D:C51A.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1                                                                                   
[   16.897393] md: bind<sdd1>                                                                                     
[   16.899820] md: bind<sdc1>                                                                                     
[   16.900043] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[fdbfd000-fdbfd7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]                                                                                                 
[   16.911310] md: bind<sde1>                                                                                     
[   16.912811] xor: automatically using best checksumming function: generic_sse                                   
[   16.961250]    generic_sse: 11178.400 MB/sec                                                                   
[   16.961253] xor: using function: generic_sse (11178.400 MB/sec)                                                
[   16.961572] async_tx: api initialized (async)                                                                  
[   17.131266] raid6: int64x1   2360 MB/s                                                                         
[   17.301266] raid6: int64x2   3142 MB/s                                                                         
[   17.471267] raid6: int64x4   2308 MB/s                                                                         
[   17.641249] raid6: int64x8   2039 MB/s                                                                         
[   17.811252] raid6: sse2x1    5214 MB/s                                                                         
[   17.981252] raid6: sse2x2    5599 MB/s                                                                         
[   18.151250] raid6: sse2x4    8891 MB/s                                                                         
[   18.151251] raid6: using algorithm sse2x4 (8891 MB/s)                                                          
[   18.153368] md: raid6 personality registered for level 6                                                       
[   18.153369] md: raid5 personality registered for level 5                                                       
[   18.153371] md: raid4 personality registered for level 4                                                       
[   18.153582] raid5: device sde1 operational as raid disk 0                                                      
[   18.153583] raid5: device sdc1 operational as raid disk 2                                                      
[   18.153585] raid5: device sdd1 operational as raid disk 1                                                      
[   18.153834] raid5: allocated 3228kB for md0                                                                    
[   18.153887] raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2                            
[   18.153889] RAID5 conf printout:                                                                               
[   18.153890]  --- rd:3 wd:3                                                                                     
[   18.153891]  disk 0, o:1, dev:sde1                                                                             
[   18.153892]  disk 1, o:1, dev:sdd1                                                                             
[   18.153894]  disk 2, o:1, dev:sdc1                                                                             
[   18.153913] md0: detected capacity change from 0 to 4000792444928                                              
[   18.154657]  md0: unknown partition table                                                                      
[   18.391246] generic-usb 0003:051D:0002.0005: hiddev97,hidraw4: USB HID v1.10 Device [American Power Conversion Back-UPS CS 350 FW:807.q3.I USB FW:q3] on usb-0000:00:1a.7-2.1.2/input0                                           
[   18.391271] usbcore: registered new interface driver usbhid                                                    
[   18.391273] usbhid: v2.6:USB HID core driver                                                                   
[   18.471290] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...    
[   19.510034] ieee1394: Error parsing configrom for node 0-00:1023                                               
[   19.510122] ieee1394: Host added: ID:BUS[0-01:1023]  GUID[00508d0000b878f5]                                    
[   19.705806] device-mapper: dm-raid45: initialized v0.2594b                                                     
[   19.712067] md: linear personality registered for level -1                                                     
[   19.713389] md: multipath personality registered for level -4                                                  
[   19.714574] md: raid0 personality registered for level 0                                                       
[   19.716444] md: raid1 personality registered for level 1                                                       
[   19.721107] md: raid10 personality registered for level 10                                                     
[   20.114080] PM: Starting manual resume from disk                                                               
[   20.114083] PM: Resume from partition 8:17                                                                     
[   20.114084] PM: Checking hibernation image.                                                                    
[   20.114315] PM: Resume from disk failed.                                                                       
[   20.137569] kjournald starting.  Commit interval 5 seconds                                                     
[   20.137575] EXT3-fs: mounted filesystem with writeback data mode.                                              
[   20.809015] type=1505 audit(1258419923.916:2): operation="profile_load" pid=588 name=/usr/share/gdm/guest-session/Xsession                                                                                                       
[   20.831794] type=1505 audit(1258419923.946:3): operation="profile_load" pid=589 name=/sbin/dhclient3           
[   20.832261] type=1505 audit(1258419923.946:4): operation="profile_load" pid=589 name=/usr/lib/NetworkManager/nm-dhcp-client.action                                                                                               
[   20.832521] type=1505 audit(1258419923.946:5): operation="profile_load" pid=589 name=/usr/lib/connman/scripts/dhclient-script                                                                                                    
[   20.846433] type=1505 audit(1258419923.956:6): operation="profile_load" pid=590 name=/usr/bin/evince           
[   20.854087] type=1505 audit(1258419923.966:7): operation="profile_load" pid=590 name=/usr/bin/evince-previewer 
[   20.858600] type=1505 audit(1258419923.966:8): operation="profile_load" pid=590 name=/usr/bin/evince-thumbnailer                                                                                                                 
[   20.876258] type=1505 audit(1258419923.986:9): operation="profile_load" pid=592 name=/usr/bin/freshclam        
[   20.886776] type=1505 audit(1258419923.996:10): operation="profile_load" pid=593 name=/usr/lib/cups/backend/cups-pdf                                                                                                             
[   20.887351] type=1505 audit(1258419923.996:11): operation="profile_load" pid=593 name=/usr/sbin/cupsd          
[   21.846045] usb-storage: device scan complete                                                                  
[   21.850144] scsi 14:0:0:0: Direct-Access     Generic  Flash HS-CF      5.39 PQ: 0 ANSI: 0                      
[   21.853263] scsi 14:0:0:1: Direct-Access     Generic  Flash HS-COMBO   5.39 PQ: 0 ANSI: 0                      
[   21.853534] sd 14:0:0:0: Attached scsi generic sg6 type 0                                                      
[   21.853591] sd 14:0:0:1: Attached scsi generic sg7 type 0                                                      
[   21.865632] sd 14:0:0:0: [sdf] Attached SCSI removable disk                                                    
[   21.869752] sd 14:0:0:1: [sdg] Attached SCSI removable disk                                                    
[   31.591503] udev: starting version 147                                                                         
[   31.676617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4                                       
[   31.702502] nvidia: module license 'NVIDIA' taints kernel.                                                     
[   31.702505] Disabling lock debugging due to kernel taint                                                       
[   31.970286] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16                                    
[   31.970292] nvidia 0000:01:00.0: setting latency timer to 64                                                   
[   31.970390] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.36  Fri Aug 14 17:35:21 PDT 2009            
[   31.979629] lp: driver loaded but no devices found                                                             
[   31.984425] w83627ehf: Found W83627DHG chip at 0x290                                                           
[   31.991385] coretemp coretemp.0: Using relative temperature scale!                                             
[   31.991412] coretemp coretemp.1: Using relative temperature scale!                                             
[   32.008836] ip_tables: (C) 2000-2006 Netfilter Core Team                                                       
[   32.044876] AV200 0000:05:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17                                     
[   32.045008] AV200 0000:05:04.0: setting latency timer to 64                                                    
[   32.104606] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)                                              
[   32.104800] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use                               
[   32.104801] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or                         
[   32.104803] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.                                             
[   32.494341] EXT3 FS on sdb3, internal journal                                                                  
[   32.689537] kjournald starting.  Commit interval 5 seconds                                                     
[   32.690011] EXT3 FS on sdb2, internal journal                                                                  
[   32.690016] EXT3-fs: mounted filesystem with writeback data mode.                                              
[   33.128792] EXT4-fs (md0): barriers enabled                                                                    
[   33.155294] kjournald2 starting: pid 1192, dev md0:8, commit interval 5 seconds                                
[   33.551667] EXT4-fs (md0): internal journal on md0:8                                                           
[   33.551672] EXT4-fs (md0): delayed allocation enabled                                                          
[   33.551675] EXT4-fs: file extents enabled                                                                      
[   33.613214] EXT4-fs: mballoc enabled                                                                           
[   33.613227] EXT4-fs (md0): mounted filesystem with ordered data mode                                           
[   33.624842] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled      
[   33.626314] SGI XFS Quota Management subsystem                                                                 
[   33.654302] XFS mounting filesystem sdb4                                                                       
[   33.735289] Ending clean XFS mount for filesystem: sdb4                                                        
[   33.977777] r8169: eth0: link up                                                                               
[   33.979541] r8169: eth1: link down                                                                             
[   33.980111] ADDRCONF(NETDEV_UP): eth1: link is not ready                                                       
[   34.004581] __ratelimit: 9 callbacks suppressed                                                                
[   34.004583] type=1505 audit(1258416337.114:15): operation="profile_replace" pid=1417 name=/usr/share/gdm/guest-session/Xsession                                                                                                  
[   34.005678] type=1505 audit(1258416337.114:16): operation="profile_replace" pid=1418 name=/sbin/dhclient3      
[   34.006148] type=1505 audit(1258416337.114:17): operation="profile_replace" pid=1418 name=/usr/lib/NetworkManager/nm-dhcp-client.action                                                                                          
[   34.006408] type=1505 audit(1258416337.114:18): operation="profile_replace" pid=1418 name=/usr/lib/connman/scripts/dhclient-script                                                                                               
[   34.008495] type=1505 audit(1258416337.114:19): operation="profile_replace" pid=1421 name=/usr/bin/evince      
[   34.065682] type=1505 audit(1258416337.174:20): operation="profile_replace" pid=1421 name=/usr/bin/evince-previewer                                                                                                              
[   34.070139] type=1505 audit(1258416337.184:21): operation="profile_replace" pid=1421 name=/usr/bin/evince-thumbnailer                                                                                                            
[   34.095283] type=1505 audit(1258416337.204:22): operation="profile_replace" pid=1431 name=/usr/bin/freshclam   
[   34.112184] type=1505 audit(1258416337.224:23): operation="profile_replace" pid=1432 name=/usr/lib/cups/backend/cups-pdf
[   34.112734] type=1505 audit(1258416337.224:24): operation="profile_replace" pid=1432 name=/usr/sbin/cupsd
[   43.650232] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   43.650234] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
[   43.650235] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   43.650236] vboxdrv: the usage of hardware performance counters by
[   43.650236] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   43.650239] vboxdrv: Found 2 processor cores.
[   43.650280] VBoxDrv: dbg - g_abExecMemory=ffffffffa0cbf420
[   43.650295] vboxdrv: fAsync=0 offMin=0x26d offMax=0x1923
[   43.650325] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   43.650327] vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
[   43.862398] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0e8f1c0
[   43.864245] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0eabac0
[   44.441036] ppdev: user-space parallel port driver
[   44.661255] eth0: no IPv6 routers present
[   45.803313] CPU0 attaching NULL sched-domain.
[   45.803317] CPU1 attaching NULL sched-domain.
[   45.840065] CPU0 attaching sched-domain:
[   45.840067]  domain 0: span 0-1 level MC
[   45.840069]   groups: 0 1
[   45.840071]   domain 1: span 0-1 level CPU
[   45.840073]    groups: 0-1 (__cpu_power = 2048)
[   45.840076] CPU1 attaching sched-domain:
[   45.840077]  domain 0: span 0-1 level MC
[   45.840079]   groups: 1 0
[   45.840081]   domain 1: span 0-1 level CPU
[   45.840082]    groups: 0-1 (__cpu_power = 2048)
    Advanced reply Adv Reply  
  3. November 18th, 2009 #3
    drpjkurian's Avatar
    drpjkurian
    drpjkurian is offline Grande Half-n-Half Cinnamon Ubuntu
    Join Date
    Apr 2009
    Location
    Mangalore India
    Beans
    844
    Distro
    Ubuntu 20.04 Focal Fossa

    Re: Black Screen of death?

    Hi
    Please try the advice of moomooranch. It helped me, The thread is
    http://ubuntuforums.org/showthread.p...69#post8340469
    Advanced reply Adv Reply  
  4. November 20th, 2009 #4
    eyelessfade
    eyelessfade is offline Tea Glorious Tea!
    Join Date
    Feb 2006
    Location
    Norway
    Beans
    304
    Distro
    Kubuntu Development Release

    Re: Black Screen of death?

    Didn't help, but maybe if I also remove "set quiet=1"
    Advanced reply Adv Reply  
  5. November 20th, 2009 #5
    eyelessfade
    eyelessfade is offline Tea Glorious Tea!
    Join Date
    Feb 2006
    Location
    Norway
    Beans
    304
    Distro
    Kubuntu Development Release

    Re: Black Screen of death?

    That worked. No fancy bootsplash, but what do I care. I usually have 2-3 weeks of uptime anyways.

    Now how to set [solved]?
    Advanced reply Adv Reply  
  6. October 18th, 2010 #6
    terabyte1's Avatar
    terabyte1
    terabyte1 is offline A Carafe of Ubuntu
    Join Date
    Jun 2007
    Location
    Northumberland, UK
    Beans
    92
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Black Screen of death?

    On downloading Ubuntu 10.10 umpteen times, and writing the image to a fresh clean disk umpteen times (using Brasero),I get a tiny script telling me the disk is busy and can't load my new system. It's some bug I've not seen b4, but I've used either a Oxford Mirror or a Cambridge one and still get the black screen of death. I guess I'll have to forgo using Ubuntu 10.10 64 until my disk arrives from the Ubuntu shop, since nothing seems to work when I download it except perhaps the LTS version of 10.04 in 64-bit mode . terabyte1
    Terabyte1

    Non sibi sed omnibus = "Not for oneself but for all."
    Advanced reply Adv Reply  
  7. February 27th, 2011 #7
    capitalfear's Avatar
    capitalfear
    capitalfear is offline Just Give Me the Beans!
    Join Date
    Jan 2010
    Location
    russian east border
    Beans
    60
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Black Screen of death?

    man you have gotten yourself into a pickle 0.o
    Unix is user-friendly. It's just very selective about who its friends are.
    The box said 'Required Windows 7 or better'. So, I installed Ubuntu.
    Fatal Error: Found MS-Windows System -> Repartitioning Disk for Linux...
    Advanced reply Adv Reply  
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Ubuntu Forums Code of Conduct