HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

**fa225909** · February 10th, 2010

Hi

No sorry but it doesn't work, here's my new log :

Code:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux fa225909 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=b5d712a0-b080-485d-b0d1-c81232053068 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
Build Date: 26 October 2009  05:19:56PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 10 20:49:53 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
    Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
(**) |-->Input Device "stylus"
(**) |-->Input Device "touch"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9612:103c:3045 ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xc0000000/268435456, 0xd2300000/65536, 0xd2200000/1048576, I/O @ 0x00005000/256
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [24] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [25] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [26] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [27] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [28] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [29] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [30] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [31] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [32] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [33] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [34] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [35] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.66.10
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.66.10
    Module class: X.Org Video Driver
(II) LoadModule: "ntrig"
(II) Loading /usr/lib/xorg/modules/input//ntrig_drv.so
(II) Module ntrig: vendor="X.Org Foundation"
    compiled for 0.0.0.1, module version = 0.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
plug
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.66.10
(II) ATI Proprietary Linux Driver Release Identifier: 8.66.1                               
(II) ATI Proprietary Linux Driver Build Date: Sep  3 2009 21:35:39
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9612) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [24] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [25] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [26] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [27] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [28] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [29] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [30] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [31] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [32] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [33] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [34] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [35] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) fglrx(0): pEnt->device->identifier=0x2196930
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [24] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [25] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [26] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [27] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [28] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [29] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [30] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [31] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [32] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [33] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [34] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [35] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [36] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [37] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [38] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [39] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [40] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 5 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Loading extension XFree86-DRI
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:5:0
(--) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics " (Chipset = 0x9612)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x3045)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xd2300000
(--) fglrx(0): I/O port at 0x00005000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.94
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: RS780M
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(II) fglrx(0): UMA/SP interleave mode is enabled in the BIOS
(--) fglrx(0): Video RAM: 327680 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:5.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x14000000)
(II) fglrx(0): Interrupt handler installed at IRQ 29.
(II) fglrx(0): IRQ 29 Enabled.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC  Model: 4a41  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 26  vert.: 16
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 69.3 MHz   Image Size:  261 x 163 mm
(II) fglrx(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1353 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 854 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0):  SAMSUNG
(II) fglrx(0):  121AT06-G01
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff004ca3414a00000000
(II) fglrx(0):     00120103801a10780a87f594574f8c27
(II) fglrx(0):     27505400000001010101010101010101
(II) fglrx(0):     010101010101121b0049502036301030
(II) fglrx(0):     130005a3100000190000000f00000000
(II) fglrx(0):     00000000002387026400000000fe0053
(II) fglrx(0):     414d53554e470a2020202020000000fe
(II) fglrx(0):     00313231415430362d4730310a200025
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LCD has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): EDID vendor "SEC", prod id 19009
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1353  800 801 804 854 -hsync -vsync (51.2 kHz)
(II) fglrx(0): Output LCD connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LCD using initial mode 1280x800
(II) fglrx(0): Display dimensions: (260, 160) mm
(II) fglrx(0): DPI set to (125, 127)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [17] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [18] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [19] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [20] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [21] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [22] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [23] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [24] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [25] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [26] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [27] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [28] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [29] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [30] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [31] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [32] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [33] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [34] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [35] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [36] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [37] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [38] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [39] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [40] 0    0    0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:5:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:5:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7f9dfcafc000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.66.10
(II) fglrx(0):     Date: Sep  3 2009
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.31-14-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd2ff7000 FBMappedSize: 0x01004000
(II) fglrx(0): Reserved 0x02500000 bytes of sideport memory for power saving
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
drmDynamicMajor: found major device number 251
drmDynamicMajor: found major device number 251
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/ati/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:5:0
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 261 x 163
pre-init start
AllocateInput
identifier: stylus
Adding to event
Passed event
eventX: 0
(II) stylus: Using device /dev/input/by-path/pci-0000:00:14.5-usb-0:2:1.1-event-mouse.
(**) stylus: always reports core events
Type: stylus
(**) Option "MaxX" "9600"
(**) MaxX set to 9600
(**) Option "MaxY" "7200"
(**) MaxY set to 7200
(**) Option "ResX" "1280"
(**) ResX set to 1280
(**) Option "ResY" "800"
(**) ResY set to 800
(**) Option "Button2" "3"
(**) stylus button set to 3
Closed Device from init.
Flags: 79 Length: 6 Name stylus
Preinit complete.
(II) XINPUT: Adding extended input device "stylus" (type: stylus)
(II) 0: Control code
device: 40165824
maxX: 9600, maxY: 7200, resX: 1280, resY: 800
(**) stylus: (accel) keeping acceleration scheme 1
(**) stylus: (accel) filter chain progression: 2.00
(**) stylus: (accel) filter stage 0: 20.00 ms
(**) stylus: (accel) set acceleration profile 0
(II) stylus: Init
(II) 1: Control code
device: 40165824
(II) stylus: On.
pre-init start
AllocateInput
identifier: touch
Adding to event
Passed event
eventX: 0
(II) touch: Using device /dev/input/by-path/pci-0000:00:14.5-usb-0:2:1.1-event-mouse.
(**) touch: always reports core events
Type: touch
(**) Option "Touch" "on"
(**) touch: Touch is enabled 
(**) Option "MaxX" "9600"
(**) MaxX set to 9600
(**) Option "MaxY" "7200"
(**) MaxY set to 7200
(**) Option "ResX" "1280"
(**) ResX set to 1280
(**) Option "ResY" "800"
(**) ResY set to 800
Closed Device from init.
Flags: 79 Length: 5 Name touch
Preinit complete.
(II) XINPUT: Adding extended input device "touch" (type: touch)
(II) 0: Control code
device: 40374784
maxX: 9600, maxY: 7200, resX: 1280, resY: 800
(**) touch: (accel) keeping acceleration scheme 1
(**) touch: (accel) filter chain progression: 2.00
(**) touch: (accel) filter stage 0: 20.00 ms
(**) touch: (accel) set acceleration profile 0
(II) touch: Init
(II) 1: Control code
device: 40374784
(II) touch: On.
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) config/hal: Adding input device Sleep Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device HP Webcam
(**) HP Webcam: always reports core events
(**) HP Webcam: Device: "/dev/input/event9"
(II) HP Webcam: Found keys
(II) HP Webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "oss"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event10"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device HID 1b96:0001
(**) HID 1b96:0001: always reports core events
(**) HID 1b96:0001: Device: "/dev/input/event8"
(II) HID 1b96:0001: Found 1 mouse buttons
(II) HID 1b96:0001: Found x and y absolute axes
(II) HID 1b96:0001: Found absolute touchpad
(II) HID 1b96:0001: Configuring as touchpad
(**) HID 1b96:0001: YAxisMapping: buttons 4 and 5
(**) HID 1b96:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 1b96:0001" (type: TOUCHPAD)
(**) HID 1b96:0001: (accel) keeping acceleration scheme 1
(**) HID 1b96:0001: (accel) filter chain progression: 2.00
(**) HID 1b96:0001: (accel) filter stage 0: 20.00 ms
(**) HID 1b96:0001: (accel) set acceleration profile 0
(II) HID 1b96:0001: initialized for absolute axes.
(II) config/hal: Adding input device HID 1b96:0001
(**) HID 1b96:0001: always reports core events
(**) HID 1b96:0001: Device: "/dev/input/event7"
(II) HID 1b96:0001: Found 1 mouse buttons
(II) HID 1b96:0001: Found x and y absolute axes
(II) HID 1b96:0001: Found absolute touchpad
(II) HID 1b96:0001: Configuring as touchpad
(**) HID 1b96:0001: YAxisMapping: buttons 4 and 5
(**) HID 1b96:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 1b96:0001" (type: TOUCHPAD)
(**) HID 1b96:0001: (accel) keeping acceleration scheme 1
(**) HID 1b96:0001: (accel) filter chain progression: 2.00
(**) HID 1b96:0001: (accel) filter stage 0: 20.00 ms
(**) HID 1b96:0001: (accel) set acceleration profile 0
(II) HID 1b96:0001: initialized for absolute axes.
(II) fglrx(0): EDID vendor "SEC", prod id 19009
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1353  800 801 804 854 -hsync -vsync (51.2 kHz)
(II) fglrx(0): EDID vendor "SEC", prod id 19009
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1353  800 801 804 854 -hsync -vsync (51.2 kHz)
(II) fglrx(0): EDID vendor "SEC", prod id 19009
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1353  800 801 804 854 -hsync -vsync (51.2 kHz)
(II) fglrx(0): EDID vendor "SEC", prod id 19009
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1353  800 801 804 854 -hsync -vsync (51.2 kHz)
(WW) HID 1b96:0001: unable to handle keycode 333

**Ayuthia** · February 10th, 2010

Originally Posted by fa225909

Hi

No sorry but it doesn't work, here's my new log :

Can you do me a favor and create this script:

Code:

cd
gedit lshal.py

and insert the following lines:

Code:

#!/usr/bin/env python
from commands import getoutput

def contains(data):
    data = data.split("\n")
    found = 0
    for item in data:
        if item.startswith("  info.capabilities = {'input'"):
            found = 1
    return found

lshal_list = getoutput("lshal |grep 1b96|grep udi|grep -v info\.udi|cut -nb 7-")
lshal_list = lshal_list.split("\n")

for udi in lshal_list:
    lshal_data = getoutput("lshal -u " + udi)
    if contains(lshal_data):
        print lshal_data

Save the file and change the permissions so that it will execute:

Code:

sudo chmod 744 lshal.py

Run the script:

Code:

python lshal.py

It will produce a lshal listing for your N-trig device so that we can tell what device is trying capture the device. Please post those results.

**fa225909** · February 10th, 2010

Here's the results :

Code:

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event7'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7/event7'  (string)

**Ayuthia** · February 10th, 2010

Originally Posted by fa225909

Here's the results :

Code:

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event7'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7/event7'  (string)

Thank you. The information above shows that the x11_driver is evdev. That means that the .fdi rules for the evdev driver grabbed this device. It is because there is a rule in /usr/share/hal/fdi/policy/10osvendor/10-x11-input.fdi has a rule in there for input.tablet (see the info.capabilities line in the above results and you will see the input.tablet). To prevent this from happening, I use a preprobe rule for 10-x11-input.fdi to ignore input.tablets. What you will need to do is create the following file:

Code:

sudo mkdir /etc/hal/fdi/preprobe
sudo mkdir /etc/hal/fdi/10osvendor
gksu gedit /etc/hal/fdi/10osvendor/10-x11-input.fdi

If you get any error messages for the first two sudo commands, it most likely because the directory is already there and that is ok. Now, that the editor is open, add the following lines:

Code:

<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
  <device>

    <match key="info.capabilities" contains="input.tablet">
      <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
             string="Linux">
    <merge key="info.ignore" type="bool">true</merge>
      </match>
    </match>

  </device>
</deviceinfo>

and save the file. You will need to restart in order to make the changes take effect.

**fa225909** · February 10th, 2010

sorry, it changed nothing....

**Ayuthia** · February 10th, 2010

Originally Posted by fa225909

sorry, it changed nothing....

Can you show the updated "python lshal.py" results?

**fa225909** · February 10th, 2010

here's the updated results :

Code:

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event7'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7/event7'  (string)

**Ayuthia** · February 10th, 2010

Originally Posted by fa225909

Code:

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1_logicaldev_input'  (string)
  input.device = '/dev/input/event8'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if1'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event8'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input8/event8'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'
  info.capabilities = {'input', 'input.tablet'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  info.product = 'HID 1b96:0001'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event7'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1b96_1_noserial_if0'  (string)
  input.product = 'HID 1b96:0001'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7/event7'  (string)

Sorry about that. I forgot that since we are using xorg.conf instead of .fdi files, we should block out the N-trig devices in .fdi also. Please create the following:

Code:

sudo mkdir /etc/hal/fdi/preprobe/20thirdparty
gksu gedit /etc/hal/fdi/preprobe/20thirdparty/10-ntrig.fdi

In the file, add the following:

Code:

<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
  <device>
    <!-- N-Trig Duosense Electromagnetic Digitizer -->
    <match key="info.product" contains="HID 1b96:0001">
      <match key="info.parent" contains="if1">
       <merge key="info.ignore" type="string">true</merge>
      </match>
    </match>
    <match key="info.product" contains="HID 1b96:0001">
      <match key="info.parent" contains="if0">
       <merge key="info.ignore" type="string">true</merge>
      </match>
    </match>
  </device>
</deviceinfo>

This will prevent hal from finding your N-trig device and use it. The xorg.conf file should be able to handle it from there.

If nothing happens when you touch the screen or use the stylus, then we will need to figure out which device to point to. From the lshal results it looks like we will need /dev/input/event8 for the touch and /dev/input/event7 for the stylus (instead of using /dev/input/by-path/pci-0000:00:14.5-usb-0:2:1.0-event-mouse in the Option "Device" line).

**fa225909** · February 10th, 2010

Touch isn't working but stylus works perfectly now!!!

Maybe I made some errors when I modified my xorg.conf ???

here's my xorg.conf :

Code:

Section "Screen"
    Identifier    "Default Screen"
    DefaultDepth    24
EndSection

Section "Module"
    Load    "glx"
EndSection

Section "Device"
    Identifier    "Default Device"
    Driver    "fglrx"
EndSection

Section "ServerLayout"
    Identifier     "X.org Configured"
    InputDevice    "stylus"
    InputDevice    "touch"
EndSection

Section "InputDevice"
    Identifier  "touch"
    Driver      "ntrig"
    Option      "Mode" "Absolute"
    Option      "Type" "touch"
    Option      "Device" "/dev/input/event8"
    Option      "MaxX" "9600"
    Option      "MaxY" "7200"
    Option      "ResX" "1280"
    Option      "ResY" "800"
    Option      "Touch" "on"
    Option      "USB" "on"
    Option      "TopX" "0"
    Option      "TopY" "0"
    Option      "BottomX" "9600"
    Option      "BottomY" "7200"
EndSection

Section "InputDevice"
    Identifier  "stylus"
    Driver      "ntrig"
    Option      "Mode" "Absolute"
    Option      "Type" "stylus"
    Option      "Device"   "/dev/input/event7"
    Option      "MaxX" "9600"
    Option      "MaxY" "7200"
    Option      "ResX" "1280"
    Option      "ResY" "800"
    Option      "Button2" "3"
EndSection

Section "ServerLayout"

Identifier      "Layout0"
Screen         "Default Screen"
InputDevice    "stylus"    
InputDevice    "touch"    

EndSection

Section "InputDevice"
    Identifier    "stylus"
    Driver        "wacom"
    Option "Device" "/dev/input/event7"
    Option        "Type"        "stylus"
    Option        "USB"        "on"
    Option        "Button2"    "3"    # make stylus button R mouse click

EndSection

Section "InputDevice"
    Identifier    "touch"
    Driver        "wacom"
    Option "Device" "/dev/input/event8"

    Option        "Type"        "touch"
    Option        "USB"        "on"
    Option        "Touch"        "on"
    Option        "TopX"        "0"
    Option        "TopY"        "0"
    Option        "BottomX"    "9600"
    Option        "BottomY"    "7200"
EndSection

**Ayuthia** · February 11th, 2010

Originally Posted by fa225909

Touch isn't working but stylus works perfectly now!!!

Maybe I made some errors when I modified my xorg.conf ???

here's my xorg.conf :

Code:

Section "Screen"
    Identifier    "Default Screen"
    DefaultDepth    24
EndSection

Section "Module"
    Load    "glx"
EndSection

Section "Device"
    Identifier    "Default Device"
    Driver    "fglrx"
EndSection

Section "ServerLayout"
    Identifier     "X.org Configured"
    InputDevice    "stylus"
    InputDevice    "touch"
EndSection

Section "InputDevice"
    Identifier  "touch"
    Driver      "ntrig"
    Option      "Mode" "Absolute"
    Option      "Type" "touch"
    Option      "Device" "/dev/input/event8"
    Option      "MaxX" "9600"
    Option      "MaxY" "7200"
    Option      "ResX" "1280"
    Option      "ResY" "800"
    Option      "Touch" "on"
    Option      "USB" "on"
    Option      "TopX" "0"
    Option      "TopY" "0"
    Option      "BottomX" "9600"
    Option      "BottomY" "7200"
EndSection

Section "InputDevice"
    Identifier  "stylus"
    Driver      "ntrig"
    Option      "Mode" "Absolute"
    Option      "Type" "stylus"
    Option      "Device"   "/dev/input/event7"
    Option      "MaxX" "9600"
    Option      "MaxY" "7200"
    Option      "ResX" "1280"
    Option      "ResY" "800"
    Option      "Button2" "3"
EndSection

Section "ServerLayout"

Identifier      "Layout0"
Screen         "Default Screen"
InputDevice    "stylus"    
InputDevice    "touch"    

EndSection

Section "InputDevice"
    Identifier    "stylus"
    Driver        "wacom"
    Option "Device" "/dev/input/event7"
    Option        "Type"        "stylus"
    Option        "USB"        "on"
    Option        "Button2"    "3"    # make stylus button R mouse click

EndSection

Section "InputDevice"
    Identifier    "touch"
    Driver        "wacom"
    Option "Device" "/dev/input/event8"

    Option        "Type"        "touch"
    Option        "USB"        "on"
    Option        "Touch"        "on"
    Option        "TopX"        "0"
    Option        "TopY"        "0"
    Option        "BottomX"    "9600"
    Option        "BottomY"    "7200"
EndSection

You might try using /dev/input/event7 for the touch also. They might still be sharing the same event. If that does not make a difference, please post the results of:

Code:

ls -l /dev/input/event*
ls -l /dev/input/by-path

It will help us see what events are being used.

Thread: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Thread Tools

Display

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions