Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: startup takes forever

  1. #1
    Join Date
    May 2009
    Location
    Utah
    Beans
    46
    Distro
    Ubuntu 10.04 Lucid Lynx

    startup takes forever

    Hi all,

    Just today My system has been taking forever to startup and displays all these commands on a black screen after the bar gets about half way across the screen. I am running ubuntu 9.04 any help and advice would be appreciated. Thanks
    haiyun211@haiyun211:~$

  2. #2

    Re: startup takes forever

    What are your system specs?
    Learning is not attained by chance, it must be sought for with ardor and attended to with diligence. Abigail Adams ( 1744 - 1818 ), 1780;

    My blog Poetry and More Free Ubuntu Magazine

  3. #3
    Join Date
    May 2009
    Location
    Utah
    Beans
    46
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: startup takes forever

    I have and intel centrino duo processor 1gb of ram a nvidia geforce go 7600 and linux kernel 2.6.28-13-generic is that what you were looking for?
    haiyun211@haiyun211:~$

  4. #4
    Join Date
    May 2006
    Location
    San Jose
    Beans
    154
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: startup takes forever

    Attach dmesg and messages logs. Should be able to see something in those logs.
    __________________________________________________ ______________________
    DELL Precision 390 T6700 @2.6Ghz 8GB nVidia NV44 Quadro NVS 285
    HP Slimline s5150t Q9300@2.8GHz 8GB Nvidia G210
    Lenovo Ideapad y550p i720 1.6Ghz 8GB Nvidia GT240M

  5. #5
    Join Date
    May 2009
    Location
    Utah
    Beans
    46
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: startup takes forever

    How do i get those?
    haiyun211@haiyun211:~$

  6. #6
    Join Date
    May 2009
    Location
    Utah
    Beans
    46
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: startup takes forever

    Is this what you wanted

    Code:
    [    0.534624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [    0.534803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [    0.541916] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
    [    0.542079] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
    [    0.542240] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
    [    0.542400] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
    [    0.542560] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
    [    0.542719] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
    [    0.542881] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
    [    0.543041] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
    [    0.543384] ACPI: WMI: Mapper loaded
    [    0.543426] SCSI subsystem initialized
    [    0.543426] libata version 3.00 loaded.
    [    0.543426] usbcore: registered new interface driver usbfs
    [    0.543426] usbcore: registered new interface driver hub
    [    0.543426] usbcore: registered new device driver usb
    [    0.543426] PCI: Using ACPI for IRQ routing
    [    0.548012] Bluetooth: Core ver 2.13
    [    0.548028] NET: Registered protocol family 31
    [    0.548028] Bluetooth: HCI device and connection manager initialized
    [    0.548028] Bluetooth: HCI socket layer initialized
    [    0.548028] NET: Registered protocol family 8
    [    0.548030] NET: Registered protocol family 20
    [    0.548043] NetLabel: Initializing
    [    0.548045] NetLabel:  domain hash size = 128
    [    0.548047] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.548062] NetLabel:  unlabeled traffic allowed by default
    [    0.548080] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.548085] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.552068] AppArmor: AppArmor Filesystem Enabled
    [    0.556014] Switched to high resolution mode on CPU 0
    [    0.556568] Switched to high resolution mode on CPU 1
    [    0.560012] pnp: PnP ACPI init
    [    0.560021] ACPI: bus type pnp registered
    [    0.565019] pnp: PnP ACPI: found 11 devices
    [    0.565022] ACPI: ACPI bus type pnp unregistered
    [    0.565025] PnPBIOS: Disabled by ACPI PNP
    [    0.565035] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
    [    0.565043] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    [    0.565046] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
    [    0.565049] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    [    0.565053] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    [    0.565056] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [    0.565059] system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved
    [    0.565063] system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
    [    0.565066] system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved
    [    0.565073] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
    [    0.565081] system 00:06: ioport range 0x380-0x383 has been reserved
    [    0.565084] system 00:06: ioport range 0x680-0x69f has been reserved
    [    0.565087] system 00:06: ioport range 0x800-0x80f has been reserved
    [    0.565090] system 00:06: ioport range 0x1000-0x107f has been reserved
    [    0.565093] system 00:06: ioport range 0x1180-0x11bf has been reserved
    [    0.565096] system 00:06: ioport range 0x1640-0x164f has been reserved
    [    0.565103] system 00:07: ioport range 0x6a0-0x6af has been reserved
    [    0.565106] system 00:07: ioport range 0x6b0-0x6ff has been reserved
    [    0.599856] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
    [    0.599859] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [    0.599862] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
    [    0.599867] pci 0000:00:01.0:   MEM window: 0xdc000000-0xddffffff
    [    0.599872] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
    [    0.599877] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    [    0.599882] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
    [    0.599888] pci 0000:00:1c.0:   MEM window: 0xd8000000-0xd9ffffff
    [    0.599894] pci 0000:00:1c.0:   PREFETCH window: 0x000000d2000000-0x000000d3ffffff
    [    0.599903] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    [    0.599907] pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
    [    0.599914] pci 0000:00:1c.1:   MEM window: 0xd6000000-0xd7ffffff
    [    0.599920] pci 0000:00:1c.1:   PREFETCH window: 0x000000d0000000-0x000000d1ffffff
    [    0.599928] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
    [    0.599932] pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
    [    0.599939] pci 0000:00:1c.2:   MEM window: 0xda000000-0xdbffffff
    [    0.599945] pci 0000:00:1c.2:   PREFETCH window: 0x000000d4000000-0x000000d5ffffff
    [    0.599954] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
    [    0.599956] pci 0000:00:1e.0:   IO window: disabled
    [    0.599963] pci 0000:00:1e.0:   MEM window: 0xde000000-0xde0fffff
    [    0.599968] pci 0000:00:1e.0:   PREFETCH window: disabled
    [    0.599985] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.599990] pci 0000:00:01.0: setting latency timer to 64
    [    0.600000] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.600009] pci 0000:00:1c.0: setting latency timer to 64
    [    0.600019] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    0.600025] pci 0000:00:1c.1: setting latency timer to 64
    [    0.600036] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.600041] pci 0000:00:1c.2: setting latency timer to 64
    [    0.600048] pci 0000:00:1e.0: enabling device (0004 -> 0006)
    [    0.600055] pci 0000:00:1e.0: setting latency timer to 64
    [    0.600059] bus: 00 index 0 io port: [0x00-0xffff]
    [    0.600062] bus: 00 index 1 mmio: [0x000000-0xffffffff]
    [    0.600065] bus: 01 index 0 io port: [0x2000-0x2fff]
    [    0.600067] bus: 01 index 1 mmio: [0xdc000000-0xddffffff]
    [    0.600070] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
    [    0.600072] bus: 01 index 3 mmio: [0x0-0x0]
    [    0.600075] bus: 02 index 0 io port: [0x3000-0x3fff]
    [    0.600078] bus: 02 index 1 mmio: [0xd8000000-0xd9ffffff]
    [    0.600080] bus: 02 index 2 mmio: [0xd2000000-0xd3ffffff]
    [    0.600083] bus: 02 index 3 mmio: [0x0-0x0]
    [    0.600085] bus: 03 index 0 io port: [0x4000-0x4fff]
    [    0.600088] bus: 03 index 1 mmio: [0xd6000000-0xd7ffffff]
    [    0.600090] bus: 03 index 2 mmio: [0xd0000000-0xd1ffffff]
    [    0.600093] bus: 03 index 3 mmio: [0x0-0x0]
    [    0.600095] bus: 05 index 0 io port: [0x5000-0x5fff]
    [    0.600098] bus: 05 index 1 mmio: [0xda000000-0xdbffffff]
    [    0.600100] bus: 05 index 2 mmio: [0xd4000000-0xd5ffffff]
    [    0.600103] bus: 05 index 3 mmio: [0x0-0x0]
    [    0.600105] bus: 07 index 0 mmio: [0x0-0x0]
    [    0.600108] bus: 07 index 1 mmio: [0xde000000-0xde0fffff]
    [    0.600110] bus: 07 index 2 mmio: [0x0-0x0]
    [    0.600112] bus: 07 index 3 io port: [0x00-0xffff]
    [    0.600115] bus: 07 index 4 mmio: [0x000000-0xffffffff]
    [    0.600125] NET: Registered protocol family 2
    [    0.612064] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.612347] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.612873] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.613163] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.613166] TCP reno registered
    [    0.620099] NET: Registered protocol family 1
    [    0.620239] checking if image is initramfs... it is
    [    1.333298] Freeing initrd memory: 7382k freed
    [    1.333342] Simple Boot Flag at 0x35 set to 0x1
    [    1.333553] cpufreq: No nForce2 chipset.
    [    1.333721] audit: initializing netlink socket (disabled)
    [    1.333749] type=2000 audit(1249864047.332:1): initialized
    [    1.342207] highmem bounce pool size: 64 pages
    [    1.342213] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    1.343796] VFS: Disk quotas dquot_6.5.1
    [    1.343863] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    1.344585] fuse init (API version 7.10)
    [    1.344684] msgmni has been set to 1724
    [    1.344900] alg: No test for stdrng (krng)
    [    1.344913] io scheduler noop registered
    [    1.344916] io scheduler anticipatory registered
    [    1.344918] io scheduler deadline registered
    [    1.344934] io scheduler cfq registered (default)
    [    1.345075] pci 0000:01:00.0: Boot video device
    [    1.351389] pcieport-driver 0000:00:01.0: setting latency timer to 64
    [    1.351430] pcieport-driver 0000:00:01.0: found MSI capability
    [    1.351458] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
    [    1.351469] pci_express 0000:00:01.0:pcie00: allocate port service
    [    1.351486] pci_express 0000:00:01.0:pcie03: allocate port service
    [    1.351547] pcieport-driver 0000:00:1c.0: setting latency timer to 64
    [    1.351598] pcieport-driver 0000:00:1c.0: found MSI capability
    [    1.351632] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
    [    1.351649] pci_express 0000:00:1c.0:pcie00: allocate port service
    [    1.351665] pci_express 0000:00:1c.0:pcie02: allocate port service
    [    1.351679] pci_express 0000:00:1c.0:pcie03: allocate port service
    [    1.351757] pcieport-driver 0000:00:1c.1: setting latency timer to 64
    [    1.351808] pcieport-driver 0000:00:1c.1: found MSI capability
    [    1.351843] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
    [    1.351860] pci_express 0000:00:1c.1:pcie00: allocate port service
    [    1.351874] pci_express 0000:00:1c.1:pcie02: allocate port service
    [    1.351888] pci_express 0000:00:1c.1:pcie03: allocate port service
    [    1.351966] pcieport-driver 0000:00:1c.2: setting latency timer to 64
    [    1.352023] pcieport-driver 0000:00:1c.2: found MSI capability
    [    1.352058] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
    [    1.352075] pci_express 0000:00:1c.2:pcie00: allocate port service
    [    1.352091] pci_express 0000:00:1c.2:pcie02: allocate port service
    [    1.352105] pci_express 0000:00:1c.2:pcie03: allocate port service
    [    1.352198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    1.352645] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
    [    1.352695] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded
    [    1.353102] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
    [    1.353145] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded
    [    1.353549] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
    [    1.353588] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded
    [    1.353598] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    1.354371] ACPI: AC Adapter [ACAD] (off-line)
    [    1.432047] ACPI: Battery Slot [BAT0] (battery present)
    [    1.432137] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [    1.432141] ACPI: Power Button (FF) [PWRF]
    [    1.432191] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [    1.432194] ACPI: Power Button (CM) [PWRB]
    [    1.432245] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [    1.432248] ACPI: Sleep Button (CM) [SLPB]
    [    1.432297] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [    1.432933] ACPI: Lid Switch [LID]
    [    1.433587] ACPI: SSDT 3FE7C189, 0238 (r1 HP     30BD         3000 INTL 20050624)
    [    1.434028] ACPI: SSDT 3FE7BC42, 04C2 (r1 HP     30BD         3001 INTL 20050624)
    [    1.436801] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    [    1.436829] processor ACPI_CPU:00: registered as cooling_device0
    [    1.436833] ACPI: Processor [CPU0] (supports 8 throttling states)
    [    1.437243] ACPI: SSDT 3FE7C3C1, 00C8 (r1 HP     30BD         3000 INTL 20050624)
    [    1.437638] ACPI: SSDT 3FE7C104, 0085 (r1 HP     30BD         3000 INTL 20050624)
    [    1.438644] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    [    1.438667] processor ACPI_CPU:01: registered as cooling_device1
    [    1.438671] ACPI: Processor [CPU1] (supports 8 throttling states)
    [    1.448430] thermal LNXTHERM:01: registered as thermal_zone0
    [    1.458071] ACPI: Thermal Zone [THR1] (0 C)
    [    1.458131] isapnp: Scanning for PnP cards...
    [    1.812074] isapnp: No Plug & Play device found
    [    1.828272] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [    1.829448] brd: module loaded
    [    1.829814] loop: module loaded
    [    1.829891] Fixed MDIO Bus: probed
    [    1.829897] PPP generic driver version 2.4.2
    [    1.829965] input: Macintosh mouse button emulation as /devices/virtual/input/input4
    [    1.830000] Driver 'sd' needs updating - please use bus_type methods
    [    1.830010] Driver 'sr' needs updating - please use bus_type methods
    [    1.830055] ahci 0000:00:1f.2: version 3.0
    [    1.830074] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    1.830117] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X
    [    1.830203] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
    [    1.830207] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
    [    1.830213] ahci 0000:00:1f.2: setting latency timer to 64
    [    1.830429] scsi0 : ahci
    [    1.830537] scsi1 : ahci
    [    1.830608] scsi2 : ahci
    [    1.830683] scsi3 : ahci
    [    1.830791] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 2299
    [    1.830794] ata2: DUMMY
    [    1.830797] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 2299
    [    1.830800] ata4: DUMMY
    [    2.148027] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    2.148641] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    [    2.148648] ata1.00: ATA-7: WDC WD1200BEVS-60LAT0, 01.06M01, max UDMA/100
    [    2.148651] ata1.00: 234441648 sectors, multi 16: LBA48 
    [    2.149309] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    [    2.149341] ata1.00: configured for UDMA/100
    [    2.484022] ata3: SATA link down (SStatus 0 SControl 300)
    [    2.500138] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
    [    2.500245] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    [    2.500265] sd 0:0:0:0: [sda] Write Protect is off
    [    2.500268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.500299] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.500369] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    [    2.500386] sd 0:0:0:0: [sda] Write Protect is off
    [    2.500389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.500418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.500423]  sda: sda1 sda2 < sda5 >
    [    2.571052] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.571102] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    2.571162] ata_piix 0000:00:1f.1: version 2.12
    [    2.571170] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.571209] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    2.571293] scsi4 : ata_piix
    [    2.571364] scsi5 : ata_piix
    [    2.571975] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
    [    2.571978] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
    [    2.732502] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
    [    2.748438] ata5.00: configured for MWDMA2
    [    2.750762] ata6: port disabled. ignoring.
    [    2.754224] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
    [    2.765924] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    2.765928] Uniform CD-ROM driver Revision: 3.20
    [    2.766025] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [    2.766065] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [    2.766825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.766848] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    2.766865] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    2.766869] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    2.766938] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    2.770860] ehci_hcd 0000:00:1d.7: debug port 1
    [    2.770868] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    2.770884] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xde304000
    [    2.784010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    2.784104] usb usb1: configuration #1 chosen from 1 choice
    [    2.784136] hub 1-0:1.0: USB hub found
    [    2.784146] hub 1-0:1.0: 8 ports detected
    [    2.784279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.784297] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.784325] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    2.784332] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    2.784336] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    2.784385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    2.784413] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
    [    2.784498] usb usb2: configuration #1 chosen from 1 choice
    [    2.784526] hub 2-0:1.0: USB hub found
    [    2.784534] hub 2-0:1.0: 2 ports detected
    [    2.784635] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.784642] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    2.784646] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    2.784691] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    2.784728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
    [    2.784814] usb usb3: configuration #1 chosen from 1 choice
    [    2.784843] hub 3-0:1.0: USB hub found
    [    2.784850] hub 3-0:1.0: 2 ports detected
    [    2.784944] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.784951] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    2.784955] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    2.785001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    2.785037] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
    [    2.785122] usb usb4: configuration #1 chosen from 1 choice
    [    2.785151] hub 4-0:1.0: USB hub found
    [    2.785161] hub 4-0:1.0: 2 ports detected
    [    2.785263] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    2.785270] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    2.785274] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    2.785324] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    2.785359] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
    [    2.785439] usb usb5: configuration #1 chosen from 1 choice
    [    2.785467] hub 5-0:1.0: USB hub found
    [    2.785474] hub 5-0:1.0: 2 ports detected
    [    2.785636] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    2.803970] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.803977] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    2.808046] mice: PS/2 mouse device common for all mice
    [    2.828082] rtc_cmos 00:08: RTC can wake from S4
    [    2.828119] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [    2.828153] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    2.828222] device-mapper: uevent: version 1.0.3
    [    2.828322] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    [    2.828415] device-mapper: multipath: version 1.0.5 loaded
    [    2.828418] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    2.828511] EISA: Probing bus 0 at eisa.0
    [    2.828519] Cannot allocate resource for EISA slot 1
    [    2.828523] Cannot allocate resource for EISA slot 2
    [    2.828526] Cannot allocate resource for EISA slot 3
    [    2.828528] Cannot allocate resource for EISA slot 4
    [    2.828531] Cannot allocate resource for EISA slot 5
    [    2.828546] EISA: Detected 0 cards.
    [    2.828688] cpuidle: using governor ladder
    [    2.828826] cpuidle: using governor menu
    [    2.829409] TCP cubic registered
    [    2.829526] NET: Registered protocol family 10
    [    2.830012] lo: Disabled Privacy Extensions
    [    2.830409] NET: Registered protocol family 17
    [    2.830427] Bluetooth: L2CAP ver 2.11
    [    2.830429] Bluetooth: L2CAP socket layer initialized
    [    2.830432] Bluetooth: SCO (Voice Link) ver 0.6
    [    2.830434] Bluetooth: SCO socket layer initialized
    [    2.830456] Marking TSC unstable due to TSC halts in idle
    [    2.830481] Bluetooth: RFCOMM socket layer initialized
    [    2.830489] Bluetooth: RFCOMM TTY layer initialized
    [    2.830491] Bluetooth: RFCOMM ver 1.10
    [    2.831196] Using IPI No-Shortcut mode
    [    2.831272] registered taskstats version 1
    [    2.831409]   Magic number: 5:684:455
    [    2.831503] rtc_cmos 00:08: setting system clock to 2009-08-10 00:27:30 UTC (1249864050)
    [    2.831508] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.831510] EDD information not available.
    [    2.831835] Freeing unused kernel memory: 532k freed
    [    2.832007] Write protecting the kernel text: 4112k
    [    2.832074] Write protecting the kernel read-only data: 1524k
    [    2.839567] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
    [    3.101033] usb 1-4: new high speed USB device using ehci_hcd and address 2
    [    3.116054] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
    [    3.116058] e1000e: Copyright (c) 1999-2008 Intel Corporation.
    [    3.127687] e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    3.127703] e1000e 0000:05:00.0: setting latency timer to 64
    [    3.127944] e1000e 0000:05:00.0: irq 2298 for MSI/MSI-X
    [    3.133233] ohci1394 0000:07:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    3.133242] ohci1394 0000:07:05.0: setting latency timer to 64
    [    3.186004] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
    [    3.237042] usb 1-4: configuration #1 chosen from 1 choice
    [    3.301129] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:36:f7:2f:7c
    [    3.301134] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.301211] 0000:05:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
    [    3.522580] PM: Starting manual resume from disk
    [    3.522584] PM: Resume from partition 8:5
    [    3.522586] PM: Checking hibernation image.
    [    3.522767] PM: Resume from disk failed.
    [    3.575724] kjournald starting.  Commit interval 5 seconds
    [    3.575755] EXT3-fs: mounted filesystem with ordered data mode.
    [    4.492563] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc000f8c8ef00]
    [   10.815223] udev: starting version 141
    [   11.077916] acpi device:05: registered as cooling_device2
    [   11.078214] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
    [   11.112117] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [   11.394926] Linux agpgart interface v0.103
    [   11.505830] intel_rng: FWH not detected
    [   11.530572] cfg80211: Calling CRDA to update world regulatory domain
    [   11.544733] ricoh-mmc: Ricoh MMC Controller disabling driver
    [   11.544736] ricoh-mmc: Copyright(c) Philip Langdale
    [   11.544775] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
    [   11.544793] ricoh-mmc: Controller is now disabled.
    [   11.633331] cfg80211: World regulatory domain updated:
    [   11.633336]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   11.633339]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   11.633343]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   11.633346]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   11.633349]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   11.633352]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   11.690891] sdhci: Secure Digital Host Controller Interface driver
    [   11.690895] sdhci: Copyright(c) Pierre Ossman
    [   11.722680] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19)
    [   11.722694] sdhci-pci 0000:07:05.1: enabling device (0000 -> 0002)
    [   11.722703] sdhci-pci 0000:07:05.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   11.722771] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [   11.722780] sdhci-pci 0000:07:05.1: setting latency timer to 64
    [   11.724847] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
    [   11.886802] Linux video capture interface: v2.00
    [   11.945017] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [   11.999112] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
    [   11.999717] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
    [   11.999982] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
    [   11.999985] uvcvideo: Failed to initialize the device (-5).
    [   12.000039] usbcore: registered new interface driver uvcvideo
    [   12.000071] USB Video Class driver (v0.1.0)
    [   12.015403] iTCO_vendor_support: vendor-support=0
    [   12.019247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    [   12.019449] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    [   12.019542] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [   12.101112] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
    [   12.241080] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
    [   12.241085] iwl3945: Copyright(c) 2003-2008 Intel Corporation
    [   12.241171] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   12.241187] iwl3945 0000:02:00.0: setting latency timer to 64
    [   12.241240] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
    [   12.241468] iwl3945 0000:02:00.0: irq 2297 for MSI/MSI-X
    [   12.282563] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
    [   12.288039] phy0: Selected rate control algorithm 'iwl-3945-rs'
    [   12.461127] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   12.461209] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   12.726730] lp: driver loaded but no devices found
    [   12.829820] Adding 3004112k swap on /dev/sda5.  Priority:-1 extents:1 across:3004112k
    [   12.862342] EXT3 FS on sda1, internal journal
    [   13.069723] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
    [   13.129481] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [  195.565030] type=1505 audit(1249864243.232:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2121
    [  195.621030] type=1505 audit(1249864243.288:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2125
    [  195.621154] type=1505 audit(1249864243.288:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2125
    [  195.621207] type=1505 audit(1249864243.288:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2125
    [  195.621254] type=1505 audit(1249864243.288:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2125
    [  195.782884] type=1505 audit(1249864243.448:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2130
    [  195.783093] type=1505 audit(1249864243.448:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2130
    [  195.839207] type=1505 audit(1249864243.504:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2134
    [  195.869808] type=1505 audit(1249864243.536:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2138
    [  196.086750] ip_tables: (C) 2000-2006 Netfilter Core Team
    [  196.146499] nf_conntrack version 0.5.0 (16359 buckets, 65436 max)
    [  196.146723] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    [  196.146726] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
    [  196.146729] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    [  196.237927] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [  207.480848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [  207.480852] Bluetooth: BNEP filters: protocol multicast
    [  207.535303] Bridge firewalling registered
    [  208.664499] ppdev: user-space parallel port driver
    [  212.352474] e1000e 0000:05:00.0: irq 2298 for MSI/MSI-X
    [  212.409137] e1000e 0000:05:00.0: irq 2298 for MSI/MSI-X
    [  212.410513] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  212.411898] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-1.ucode
    [  212.654420] Registered led device: iwl-phy0:radio
    [  212.654513] Registered led device: iwl-phy0:assoc
    [  212.654553] Registered led device: iwl-phy0:RX
    [  212.654591] Registered led device: iwl-phy0:TX
    [  212.664482] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [  221.500140] Clocksource tsc unstable (delta = -251840457 ns)
    [  451.321150] wlan0: authenticate with AP 00:1e:8c:03:16:42
    [  451.323168] wlan0: authenticated
    [  451.323180] wlan0: associate with AP 00:1e:8c:03:16:42
    [  451.325543] wlan0: RX AssocResp from 00:1e:8c:03:16:42 (capab=0x411 status=0 aid=2)
    [  451.325552] wlan0: associated
    [  451.329739] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [  461.376122] wlan0: no IPv6 routers present
    [ 3478.341151] CE: hpet increasing min_delta_ns to 15000 nsec
    haiyun211@haiyun211:~$

  7. #7
    Join Date
    May 2006
    Location
    San Jose
    Beans
    154
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: startup takes forever

    That looks like the dmesg log and I don't see any issues. Now attach output of 'cat /var/log/messages'
    __________________________________________________ ______________________
    DELL Precision 390 T6700 @2.6Ghz 8GB nVidia NV44 Quadro NVS 285
    HP Slimline s5150t Q9300@2.8GHz 8GB Nvidia G210
    Lenovo Ideapad y550p i720 1.6Ghz 8GB Nvidia GT240M

  8. #8
    Join Date
    Jan 2006
    Beans
    Hidden!

    Re: startup takes forever

    Hmm, there is a huge pause here:

    Code:
    [   13.129481] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [  195.565030] type=1505 audit(1249864243.232:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2121
    Great links: Tutorials & Tips Forum - GNOME System Administration Guide - Bash-Scripting Guide
    Remember: Please mark your thread as [ SOLVED ] if you found a working solution!

  9. #9
    Join Date
    May 2009
    Location
    Utah
    Beans
    46
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: startup takes forever

    Quote Originally Posted by bhaverkamp View Post
    That looks like the dmesg log and I don't see any issues. Now attach output of 'cat /var/log/messages'
    ok here is the output of the second one.

    Code:
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.333333] Freeing initrd memory: 7382k freed
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.333376] Simple Boot Flag at 0x35 set to 0x1
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.333588] cpufreq: No nForce2 chipset.
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.333754] audit: initializing netlink socket (disabled)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.333782] type=2000 audit(1249964663.333:1): initialized
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.342243] highmem bounce pool size: 64 pages
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.342249] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.343832] VFS: Disk quotas dquot_6.5.1
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.343900] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344623] fuse init (API version 7.10)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344722] msgmni has been set to 1724
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344937] alg: No test for stdrng (krng)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344950] io scheduler noop registered
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344953] io scheduler anticipatory registered
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344955] io scheduler deadline registered
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.344971] io scheduler cfq registered (default)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.351879] pcieport-driver 0000:00:01.0: found MSI capability
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.352051] pcieport-driver 0000:00:1c.0: found MSI capability
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.352262] pcieport-driver 0000:00:1c.1: found MSI capability
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.352471] pcieport-driver 0000:00:1c.2: found MSI capability
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.352643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.353090] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.353548] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.353995] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.354045] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.354932] ACPI: AC Adapter [ACAD] (off-line)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427542] ACPI: Battery Slot [BAT0] (battery present)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427632] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427636] ACPI: Power Button (FF) [PWRF]
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427686] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427689] ACPI: Power Button (CM) [PWRB]
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427740] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427743] ACPI: Sleep Button (CM) [SLPB]
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.427793] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.428744] ACPI: Lid Switch [LID]
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.429396] ACPI: SSDT 3FE7C189, 0238 (r1 HP     30BD         3000 INTL 20050624)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.429837] ACPI: SSDT 3FE7BC42, 04C2 (r1 HP     30BD         3001 INTL 20050624)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.432610] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.432638] processor ACPI_CPU:00: registered as cooling_device0
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.432642] ACPI: Processor [CPU0] (supports 8 throttling states)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.433051] ACPI: SSDT 3FE7C3C1, 00C8 (r1 HP     30BD         3000 INTL 20050624)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.433447] ACPI: SSDT 3FE7C104, 0085 (r1 HP     30BD         3000 INTL 20050624)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.434456] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.434479] processor ACPI_CPU:01: registered as cooling_device1
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.434483] ACPI: Processor [CPU1] (supports 8 throttling states)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.443109] thermal LNXTHERM:01: registered as thermal_zone0
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.452399] ACPI: Thermal Zone [THR1] (0 C)
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.452459] isapnp: Scanning for PnP cards...
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.806446] isapnp: No Plug & Play device found
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.820273] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.821450] brd: module loaded
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.821815] loop: module loaded
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.821891] Fixed MDIO Bus: probed
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.821897] PPP generic driver version 2.4.2
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.821964] input: Macintosh mouse button emulation as /devices/virtual/input/input4
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.821998] Driver 'sd' needs updating - please use bus_type methods
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822009] Driver 'sr' needs updating - please use bus_type methods
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822072] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822202] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822206] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822426] scsi0 : ahci
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822534] scsi1 : ahci
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822605] scsi2 : ahci
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822680] scsi3 : ahci
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822788] ata1: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 2299
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822791] ata2: DUMMY
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822795] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 2299
    Aug 10 22:24:59 haiyun-laptop kernel: [    1.822797] ata4: DUMMY
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.140026] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.140640] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.140646] ata1.00: ATA-7: WDC WD1200BEVS-60LAT0, 01.06M01, max UDMA/100
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.140649] ata1.00: 234441648 sectors, multi 16: LBA48 
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.141308] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.141340] ata1.00: configured for UDMA/100
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.476022] ata3: SATA link down (SStatus 0 SControl 300)
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492140] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492246] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492267] sd 0:0:0:0: [sda] Write Protect is off
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492369] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492386] sd 0:0:0:0: [sda] Write Protect is off
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.492423]  sda: sda1 sda2 < sda5 >
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.571151] sd 0:0:0:0: [sda] Attached SCSI disk
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.571201] sd 0:0:0:0: Attached scsi generic sg0 type 0
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.571268] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.571393] scsi4 : ata_piix
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.571463] scsi5 : ata_piix
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.572090] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.572094] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.736503] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.752439] ata5.00: configured for MWDMA2
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.758226] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.769927] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.769931] Uniform CD-ROM driver Revision: 3.20
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.770068] sr 4:0:0:0: Attached scsi generic sg1 type 5
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.770828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.770852] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.770873] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.770943] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.774857] ehci_hcd 0000:00:1d.7: debug port 1
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.774881] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xde304000
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788106] usb usb1: configuration #1 chosen from 1 choice
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788138] hub 1-0:1.0: USB hub found
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788147] hub 1-0:1.0: 8 ports detected
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788298] uhci_hcd: USB Universal Host Controller Interface driver
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788325] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788336] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788412] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788496] usb usb2: configuration #1 chosen from 1 choice
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788524] hub 2-0:1.0: USB hub found
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788532] hub 2-0:1.0: 2 ports detected
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788633] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788644] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788689] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788725] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788811] usb usb3: configuration #1 chosen from 1 choice
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788840] hub 3-0:1.0: USB hub found
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788848] hub 3-0:1.0: 2 ports detected
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788943] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788954] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.788999] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789035] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789121] usb usb4: configuration #1 chosen from 1 choice
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789149] hub 4-0:1.0: USB hub found
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789160] hub 4-0:1.0: 2 ports detected
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789262] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789273] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789322] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789358] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789438] usb usb5: configuration #1 chosen from 1 choice
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789465] hub 5-0:1.0: USB hub found
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789473] hub 5-0:1.0: 2 ports detected
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.789634] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.807127] serio: i8042 KBD port at 0x60,0x64 irq 1
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.807134] serio: i8042 AUX port at 0x60,0x64 irq 12
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.808047] mice: PS/2 mouse device common for all mice
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828083] rtc_cmos 00:08: RTC can wake from S4
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828120] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828154] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828223] device-mapper: uevent: version 1.0.3
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828321] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828413] device-mapper: multipath: version 1.0.5 loaded
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828416] device-mapper: multipath round-robin: version 1.0.0 loaded
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828510] EISA: Probing bus 0 at eisa.0
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828518] Cannot allocate resource for EISA slot 1
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828521] Cannot allocate resource for EISA slot 2
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828524] Cannot allocate resource for EISA slot 3
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828526] Cannot allocate resource for EISA slot 4
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828529] Cannot allocate resource for EISA slot 5
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828545] EISA: Detected 0 cards.
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828687] cpuidle: using governor ladder
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.828825] cpuidle: using governor menu
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.829407] TCP cubic registered
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.829525] NET: Registered protocol family 10
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830011] lo: Disabled Privacy Extensions
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830408] NET: Registered protocol family 17
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830426] Bluetooth: L2CAP ver 2.11
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830428] Bluetooth: L2CAP socket layer initialized
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830432] Bluetooth: SCO (Voice Link) ver 0.6
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830434] Bluetooth: SCO socket layer initialized
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830456] Marking TSC unstable due to TSC halts in idle
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830481] Bluetooth: RFCOMM socket layer initialized
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830488] Bluetooth: RFCOMM TTY layer initialized
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.830491] Bluetooth: RFCOMM ver 1.10
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831209] Using IPI No-Shortcut mode
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831284] registered taskstats version 1
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831421]   Magic number: 5:633:413
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831515] rtc_cmos 00:08: setting system clock to 2009-08-11 04:24:25 UTC (1249964665)
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831519] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831521] EDD information not available.
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.831847] Freeing unused kernel memory: 532k freed
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.832017] Write protecting the kernel text: 4112k
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.832083] Write protecting the kernel read-only data: 1524k
    Aug 10 22:24:59 haiyun-laptop kernel: [    2.839625] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.095980] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.095984] e1000e: Copyright (c) 1999-2008 Intel Corporation.
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.096074] e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.101035] usb 1-4: new high speed USB device using ehci_hcd and address 2
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.139476] ohci1394 0000:07:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.191251] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.233149] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:36:f7:2f:7c
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.233153] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.233231] 0000:05:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.239913] usb 1-4: configuration #1 chosen from 1 choice
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.523336] PM: Starting manual resume from disk
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.576059] kjournald starting.  Commit interval 5 seconds
    Aug 10 22:24:59 haiyun-laptop kernel: [    3.576079] EXT3-fs: mounted filesystem with ordered data mode.
    Aug 10 22:24:59 haiyun-laptop kernel: [   10.726580] udev: starting version 141
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.313737] acpi device:05: registered as cooling_device2
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.313996] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.317220] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.332642] Linux video capture interface: v2.00
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.437297] intel_rng: FWH not detected
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.463923] Linux agpgart interface v0.103
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.516106] cfg80211: Calling CRDA to update world regulatory domain
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.585816] sdhci: Secure Digital Host Controller Interface driver
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.585819] sdhci: Copyright(c) Pierre Ossman
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.587739] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.587753] sdhci-pci 0000:07:05.1: enabling device (0000 -> 0002)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.587761] sdhci-pci 0000:07:05.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.588805] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.590908] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710858] cfg80211: World regulatory domain updated:
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710862] ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710865] ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710869] ^I(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710872] ^I(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710875] ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.710878] ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.756737] ricoh-mmc: Ricoh MMC Controller disabling driver
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.756740] ricoh-mmc: Copyright(c) Philip Langdale
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.756778] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.756797] ricoh-mmc: Controller is now disabled.
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.785020] input: PC Speaker as /devices/platform/pcspkr/input/input7
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.943756] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.945950] usbcore: registered new interface driver uvcvideo
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.945954] USB Video Class driver (v0.1.0)
    Aug 10 22:24:59 haiyun-laptop kernel: [   11.992437] iTCO_vendor_support: vendor-support=0
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.008124] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.008262] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.008333] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.055280] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.139186] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.139190] iwl3945: Copyright(c) 2003-2008 Intel Corporation
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.139267] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.139363] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.182564] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.350360] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.560406] lp: driver loaded but no devices found
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.662727] Adding 3004112k swap on /dev/sda5.  Priority:-1 extents:1 across:3004112k
    Aug 10 22:24:59 haiyun-laptop kernel: [   12.696216] EXT3 FS on sda1, internal journal
    Aug 10 22:24:59 haiyun-laptop kernel: [   13.021073] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
    Aug 10 22:24:59 haiyun-laptop kernel: [   13.081400] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.028051] type=1505 audit(1249964697.696:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2042
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.083955] type=1505 audit(1249964697.748:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2046
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.084077] type=1505 audit(1249964697.752:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2046
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.084125] type=1505 audit(1249964697.752:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2046
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.084172] type=1505 audit(1249964697.752:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2046
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.245953] type=1505 audit(1249964697.912:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2051
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.246156] type=1505 audit(1249964697.912:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2051
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.291108] type=1505 audit(1249964697.956:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2055
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.321544] type=1505 audit(1249964697.988:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2059
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.538866] ip_tables: (C) 2000-2006 Netfilter Core Team
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.598415] nf_conntrack version 0.5.0 (16359 buckets, 65436 max)
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.598641] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.598644] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.598647] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    Aug 10 22:24:59 haiyun-laptop kernel: [   35.689857] ip6_tables: (C) 2000-2006 Netfilter Core Team
    Aug 10 22:25:05 haiyun-laptop kernel: [   42.920444] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Aug 10 22:25:05 haiyun-laptop kernel: [   42.920448] Bluetooth: BNEP filters: protocol multicast
    Aug 10 22:25:05 haiyun-laptop kernel: [   42.976216] Bridge firewalling registered
    Aug 10 22:25:07 haiyun-laptop kernel: [   44.315132] ppdev: user-space parallel port driver
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.406628] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.407986] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-1.ucode
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.795336] Registered led device: iwl-phy0:radio
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.795422] Registered led device: iwl-phy0:assoc
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.795461] Registered led device: iwl-phy0:RX
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.795498] Registered led device: iwl-phy0:TX
    Aug 10 22:25:11 haiyun-laptop kernel: [   48.802266] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Aug 10 22:25:17 haiyun-laptop kernel: [   54.500143] Clocksource tsc unstable (delta = -491745887 ns)
    Aug 10 22:26:03 haiyun-laptop kernel: [  100.572379] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    haiyun211@haiyun211:~$

  10. #10
    Join Date
    May 2009
    Location
    Utah
    Beans
    46
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: startup takes forever

    Quote Originally Posted by TheForumTroll View Post
    Hmm, there is a huge pause here:

    Code:
    [   13.129481] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [  195.565030] type=1505 audit(1249864243.232:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2121
    Ok so do you know what might be causing this delay the delay is worse if I dont have my laptop plugged in?
    haiyun211@haiyun211:~$

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •