Hi people!
I've got a problem with my SATA DVD Burner. The problem I hyave is that DVD's burnt with it are completely unreadable. I first noticed the problem when trying to burn a bootable DVD, wich did not boot. I realized that it actually was unreadable. Is it possible that the DVD burner is broken (it's been bought recently)? I'm using Jaunty, on AMD64 platform. I tried burning a bootable CD today, and I got the following log:
It seems to detect the drive correctly, but I can't find the part where everything stops workingCode:Checking session consistency (brasero_burn_check_session_consistency burn.c:1905) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_XMG3WU.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI called brasero_job_get_input_type BraseroBurnURI burn:// URI found burn:///7.2-RELEASE-i386-disc1.iso BraseroBurnURI called brasero_job_set_current_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI no burn:// URI found BraseroBurnURI called brasero_job_add_track BraseroBurnURI called brasero_job_get_action BraseroBurnURI Finished track successfully BraseroBurnURI stopping BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_set_output_size_for_current_track BraseroLocalTrack stopping BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_session_output_size BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_8H2OWU.bin toc = none BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_current_track BraseroLocalTrack called brasero_job_get_input_type BraseroLocalTrack no remote URIs BraseroLocalTrack stopping BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_flags BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_fd_in BraseroChecksumImage called brasero_job_set_output_size_for_current_track BraseroChecksumImage stopping BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_flags BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_session_output_size BraseroChecksumImage output set (IMAGE) image = /tmp/brasero_tmp_T45OWU.bin toc = none BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_input_type BraseroChecksumImage called brasero_job_set_current_action BraseroChecksumImage called brasero_job_get_fd_in BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage Starting checksuming file /home/emil/Escritorio/7.2-RELEASE-i386-disc1.iso (size = 587503616) BraseroChecksumImage called brasero_job_get_fd_out BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage Setting new checksum (type = 2) b2415294a55ab3e5c1931f4e0fe67e4e ( before) BraseroChecksumImage Finished track successfully BraseroChecksumImage stopping BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim got varg: BraseroWodim deactivating BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_speed BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_get_fd_in BraseroWodim called brasero_job_get_current_track BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 speed=48 driveropts=burnfree -dao fs=16m -data -nopad /home/emil/Escritorio/7.2-RELEASE-i386-disc1.iso BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stdout: Driveropts: 'burnfree' BraseroWodim stdout: Device type : Removable CD-ROM BraseroWodim stdout: Version : 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info : 'HL-DT-ST' BraseroWodim stdout: Identification : 'DVD-RAM GH22NS30' BraseroWodim stdout: Revision : '1.01' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW. BraseroWodim stdout: Current: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0012 (DVD-RAM) BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) BraseroWodim stdout: Profile: 0x001B (DVD+R) BraseroWodim stdout: Profile: 0x001A (DVD+RW) BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording) BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording) BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0009 (CD-R) (current) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Profile: 0x0002 (Removable disk) BraseroWodim stdout: Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). BraseroWodim stdout: Driver flags : MMC-3 SWABAUDIO BURNFREE BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R BraseroWodim stdout: Drive buf size : 1114112 = 1088 KB BraseroWodim stdout: Drive DMA Speed: 109342 kB/s 621x CD 78x DVD BraseroWodim stderr: Speed set to 8468 KB/s BraseroWodim called brasero_job_get_flags BraseroWodim stdout: FIFO size : 16777216 = 16384 KB BraseroWodim stdout: Track 01: data 560 MB BraseroWodim stdout: Total size: 643 MB (63:44.89) = 286867 sectors BraseroWodim stdout: Lout start: 643 MB (63:46/67) = 286867 sectors BraseroWodim stdout: Current Secsize: 2048 BraseroWodim stdout: ATIP info from disk: BraseroWodim stdout: Indicated writing power: 5 BraseroWodim stdout: Is not unrestricted BraseroWodim stdout: Is not erasable BraseroWodim stdout: Disk sub type: Medium Type B, low Beta category (B-) (4) BraseroWodim stdout: ATIP start of lead in: -11933 (97:22/67) BraseroWodim stdout: ATIP start of lead out: 359849 (79:59/74) BraseroWodim stdout: Disk type: Short strategy type (Phthalocyanine or similar) BraseroWodim stdout: Manuf. index: 43 BraseroWodim stdout: Manufacturer: Acer Media Technology, Inc. BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 72982 BraseroWodim stdout: Starting to write CD/DVD at speed 48.0 in real SAO mode for single session. BraseroWodim stdout: Last chance to quit, starting real write in 4 seconds. BraseroWodim called brasero_job_set_dangerous BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 3 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 2 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 1 seconds. 0 seconds. Operation starts. BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready. BraseroWodim stdout: Performing OPC... BraseroWodim stdout: Sending CUE sheet... BraseroWodim called brasero_job_get_input_type BraseroWodim called brasero_job_set_current_action BraseroWodim stderr: wodim: CUE sheet not accepted. Retrying with minimum pregapsize = 1. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stderr: CDB: 5D 00 00 00 00 00 00 00 20 00 BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Writing time: 0.026s BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x5 Illegal Request, Segment 0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 0.001s timeout 200s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Cannot send CUE sheet. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Could not write Lead-in. BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_error BraseroWodim finished with an error BraseroWodim asked to stop because of an error error = 12 message = "Ocurrió un error al grabar al disco" BraseroWodim stopping BraseroWodim got killed Session error : Ocurrió un error al grabar al disco (brasero_burn_record burn.c:2599)
Thank's for your help / sorry for that long log
Adv Reply
Bookmarks