Results 1 to 4 of 4

Thread: Wireless works via CLI, NetMan won't manage it

  1. #1
    Join Date
    Oct 2006
    Beans
    11

    Unhappy Wireless works via CLI, NetMan won't manage it

    I was attempting to configure my new Linksys WRT54GL as a Wireless Bridge (as a first step to making it a Repeater Bridge). It seems as though I messed up the Network Manager while trying to set my /etc/network/interfaces file for a static IP. Not sure how...but there it is.

    As it is now, I can connect to my wireless network via the command line. So that's good. But, it's really not a user-friendly thing to have to use the CLI every time. I can also plug in my ethernet cord and connect to the router that way.

    Here's the kicker. When connecting via ethernet, the Network Manager recognizes and automatically connects to the router. The wireless will not. When you hover over the icon, it says that for Wireless Networks, the error message is 'device not managed'. Wired Network says 'disconnected' and it shows the 'auto eth0' message when connected via ethernet cord.

    Ideas?

    root@HPMini:/# iwconfig
    lo no wireless extensions.

    eth1 no wireless extensions.

    eth0 IEEE 802.11bg ESSID:"linksys-n" Nickname: ""
    Mode:Managed Frequency:2.437 GHz Access Point: 00:21:29E:97:AA
    Bit Rate=5.5 Mb/s Tx-Power:32 dBm
    Retry min limit:7 RTS thrff Fragment thrff
    Power Managementmode:All packets received
    Link Quality=2/5 Signal level=-77 dBm Noise level=-90 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:237 Invalid misc:0 Missed beacon:0

    pan0 no wireless extensions



    I have an HP Mini 1120NR running Ubuntu UNR 9.04 (Kernel 2.6.28-13-generic, Ubuntu 4.3.3-5ubuntu4).

    Any and all help would be GREATLY appreciated!!!

    KDW
    Last edited by smiley505; July 2nd, 2009 at 08:32 AM. Reason: Adding hardware specific info

  2. #2
    Join Date
    Jul 2006
    Location
    Here
    Beans
    10,543

    Re: Wireless works via CLI, NetMan won't manage it

    you can use either /etc/network/interfaces or network manager, but you can't use both.
    /etc/network/interfaces overrides network manager.

    to fix just remove what ever you put in /etc/network/interfaces.

  3. #3
    Join Date
    Oct 2006
    Beans
    11

    Talking Re: Wireless works via CLI, NetMan won't manage it

    Yeah...since that is what I initially changed in order to set my static IP, that's the first thing I tried to set back to the way it was before I did anything.

    I just now double-checked and there were two lines for eth0 that weren't there a minute ago.

    I deleted them, saved, and rebooted. And SHAZAM!

    Could have sworn I reverted the file back to just the lo interface, but I guess not.

    Thanks so much!!!!!

    KDW

  4. #4
    Join Date
    Oct 2006
    Beans
    11

    Re: Wireless works via CLI, NetMan won't manage it

    OK. Now, I've rebooted a couple of times. Now the ethernet connection is gone. eth1 is not shown on ifconfig. But the device IS listed in lspci.

    I've rebooted a couple of times since finding this problem. Doesn't fix it. And I've checked /etc/network/interfaces each time. The only lines in it are what was there originaly:
    auto lo
    iface lo inet loopback


    Help?

    KDW
    Last edited by smiley505; July 3rd, 2009 at 07:52 AM. Reason: Added /etc/network/interfaces output

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •