I am using BSNL WLL phone. On the phone cover the company name is printed as HTC Clarity-IIA. But i installed VIA CBP USB driver. When i installed OpenSolaris,it detected my modem as CDS4. I am using USB to USB cable to connect phone and PC.I cant configure this modem in Ubuntu. please help me with step by step process of configuring.I am new to ubuntu. So please help me. "If possible" mail the steps to ttsdinesh@gmail.com.
-->I tried the following steps:
the output is:Code:lsusb
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-->Again when i pluged-in my modem, i got:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 15eb:0001
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
the output is:Code:dmesg |grep usb
[ 2.815386] usbcore: registered new interface driver usbfs
[ 2.815427] usbcore: registered new interface driver hub
[ 2.815502] usbcore: registered new device driver usb
[ 2.861066] usb usb1: configuration #1 chosen from 1 choice
[ 3.069279] usb usb2: configuration #1 chosen from 1 choice
[ 3.180648] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 3.277349] usb usb3: configuration #1 chosen from 1 choice
[ 3.356053] usb 1-1: configuration #1 chosen from 1 choice
[ 3.468031] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3.484631] usb usb4: configuration #1 chosen from 1 choice
[ 3.625368] usb 2-2: configuration #1 chosen from 1 choice
[ 3.704373] usb usb5: configuration #1 chosen from 1 choice
[ 3.758141] usbcore: registered new interface driver hiddev
[ 3.777791] usbcore: registered new interface driver usbhid
[ 3.777796] usbhid: v2.6:USB HID core driver
[ 3.872080] usb 2-2: USB disconnect, address 2
[ 4.000066] usb 1-1: USB disconnect, address 2
[ 4.608036] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 4.755442] sdb:<6>usb 2-2: configuration #1 chosen from 1 choice
[ 5.016031] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 5.192047] usb 1-1: configuration #1 chosen from 1 choice
[ 5.208349] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
[ 5.236460] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1
[ 18.008088] usb 2-2: USB disconnect, address 3
[ 186.692027] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 186.854331] usb 2-2: configuration #1 chosen from 1 choice
-->I typed the following codes in a text fileCode:sudo gedit /etc/udev/rules.d/026_ti_usb_3410.rules
#TI USB 15eb
SUBSYSTEM==?usb_device? ACTION==?add? \
SYSFS{idVendor}==?0001?,SYSFS{idProduct}==?15eb? \
SYSFS{bNumConfigurations}==?5? \
SYSFS{bConfigurationValue}==?1? \
RUN+=?/bin/sh -c ?echo 2 > /sys%p/device/bConfigurationValue??
-->When i saved & closed the text file,following error appears in terminal:
I/O error : No such file or directory
I/O error : No such file or directory
** (gedit:5743): WARNING **: Could not write gedit state file: Failed to create file '/root/.gnome2/gedit-2.80IDWU': No such file or directory
I ignored the error and continued.
-->I typed the following codes in a text fileCode:sudo gedit /etc/wvdial.conf
[Dialer bsnl]
Modem = /dev/ttyUSB0
Baud = 230400
Phone = #777
Init1 = ATZ
Stupid Mode = 1
Dial Command = ATDT
Username = username
Password = password
PPPD Options = lock noauth refuse-eap refuse-chap refuse-mschap
nobsdcomp nodeflate
-->When i saved & closed the text file,following error appears in terminal:
** (gedit:5759): WARNING **: Could not write gedit state file: Failed to create file '/root/.gnome2/gedit-2.K7RIWU': No such file or directory
I/O error : No such file or directory
I/O error : No such file or directory
-->Again ignored the error and continued.
the output is:Code:sudo wvdial bsnl
--> Ignoring malformed input line: "nobsdcomp nodeflate"
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
Please help me..
Bookmarks