Results 1 to 7 of 7

Thread: Unknown source IP in Wireshark packet capture

  1. #1
    Join Date
    Apr 2009
    Beans
    39

    Unknown source IP in Wireshark packet capture

    Hi,
    i installed wireshark on Ubuntu 8.04 yesterday and was connected to net wirelessly. I ran wireshark as sudo. Here is a line from packets captured on wireless interface:

    who has? tell
    10.232.218.1 10.232.218.117

    Now my IP begins with 192.168 and same for my default gateway. From what little knowledge I have, this seems to be and ARP msg but how come its from some IP address other than my computer (i.e. 10.232.218.117 )

    Also there was a line "Zhongxin_81:94:e7" which was an ARP broadcast.

    Can anyone please explain what these two things mean?

    Thank you.

  2. #2
    Join Date
    Mar 2006
    Location
    Williams Lake
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Unknown source IP in Wireshark packet capture

    Do you have any vm's running when you see the these ip addresses? With networking set for nat I get an ip address of 10.0.2.2. running Jaunty in Virtualbox.

  3. #3
    Join Date
    Apr 2009
    Beans
    39

    Re: Unknown source IP in Wireshark packet capture

    I have nothing running on my Laptop.
    I use it only to surf net.
    Even today I am seeing the same IP addresses.


    ( i searched for it and found its from Private IP address range and it cant be on internet...)
    Last edited by kewl_123; May 10th, 2009 at 07:19 AM.

  4. #4
    Join Date
    Feb 2008
    Beans
    6

    Re: Unknown source IP in Wireshark packet capture

    Go to www.whatismyip.com and see if that is the WAN IP for you.


    192.168.x.x should be your LAN IP.

    My LAN assigns 192.168.x.xx to my network but my WAN is 75.64. etc...


    If I understand LAN and WAN IP protocols correctly.


    Good luck,

    Mike

  5. #5
    Join Date
    Oct 2008
    Location
    /var/log/uk :-)
    Beans
    223
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Unknown source IP in Wireshark packet capture

    Can you ping either of the addresses?

    Have you looked at your router, who's attached? Do you use wireless security?

  6. #6
    Join Date
    Apr 2009
    Beans
    39

    Re: Unknown source IP in Wireshark packet capture

    Quote Originally Posted by mr-woof View Post
    Can you ping either of the addresses?

    Have you looked at your router, who's attached? Do you use wireless security?
    I cant ping either address.

    I couldnt make out if someone is attached to my router.

    As for wireless security, the only thing I have is the ID and Password entered in router by the ISP guy. I asked him can anyone connect to my wireless network and he said no one can as they dont have my ID and Password.
    But when I had a look at my router interface, one thing that i saw was it said "authentication disabled" in the wireless section, no WEP or anything.


    Miluns:
    No, thats not my WAN IP.
    From as much as I know, IP startting with 10 cant be an IP on internet as its reserved as private IP and those packets will get dropped.
    Last edited by kewl_123; May 11th, 2009 at 04:50 AM.

  7. #7
    Join Date
    Nov 2007
    Location
    London, England
    Beans
    7,701

    Re: Unknown source IP in Wireshark packet capture

    I think it is likely coming from your ISP for some reason, in which case all you can do is ignore it. You could examine the source MAC address to see which hardware NIC is sending it, and compare that with the MAC address your router is using.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •