Alcor Micro Corp. Multimedia Card Reader don't work after upgrading Ubuntu to 9.04

[Leolik]

In 8.10 cardreader work fine. After update - not work.
In lsusb - it displayed:
Bus 001 Device 005: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader
but in system - not displayed.
I try insert memory card to cardreader - nothing happened.
In dmesg and other logs nothing displayed
Any ideas?

Ubuntu 9.04 amd64

[ninboy]

Mine lsusb shows:

Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device

. Same here, it worked in 8.10, but it doesn't work in 9.04

[upptown]

Here is the out put of "lsusb"

Bus 001 Device 013: ID 058f:6366 Alcor Micro Corp. 
Bus 001 Device 008: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 003: ID 059b:0277 Iomega Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Added

usb_modules

to /etc/modules

That got device 008 (058f:6362 Alcor Micro Corp) working.
But no joy on Device 013 (058f:6366 Alcor Micro Corp).

Device 013 connects to a USB riser on the mobo.
Device 008 is a generic $19 USB card reader.

From what I've read this issue could be related to the ehci_hcd module and about the only fix is to disable ehci_module which means you won't have USB 2.0 support on your system. Does anyone have an alternate fix that doesn't kill USB 2.0?

[hops-1]

It seems taht I have a similar problem with my card reader. It is an Alcor card reader as above and my lsusb output reads as follows:

>:~$ lsusb
Bus 001 Device 006: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 002: ID 045e:074a Microsoft Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 046a:0023 Cherry GmbH Cymotion Master Linux Keyboard
Bus 004 Device 002: ID 046d:c506 Logitech, Inc. MX-700 Cordless Mouse Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

I added

usb_modules

to

/etc/modules

, but it stilldoes not work.

Is there any other idea to get the device to work. It worked just fine with Ubuntu 8.10 and before...

[Digicrat]

Did either of you ever manage to get that card working? Not to hijack an old thread, but I'm having a similar problem now with a new internal USB MMC reader that I've just installed.

The device is being detected, but I can't mount it (manually or automatically). It doesn't appear to detect anything when I insert or remove a card, though if a card is connected on boot it does appear to find the SD card and fails to read capacity. The reader also has an extra USB port on it that I tested out of curiosity, and it appears that port isn't working either.

Any ideas? Or am I going to be making another trip to MicroCenter next week ...


lsusb shows my reader as:

Bus 002 Device 005: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader

dmesg includes:

[  109.550428] scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[  109.551292] scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[  109.552167] scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[  109.553044] scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[  109.554038] scsi 10:0:0:4: Direct-Access     Generic  Mini SD Reader   1.06 PQ: 0 ANSI: 0
[  139.664022] usb 2-5: reset high speed USB device using ehci_hcd and address 5
[  149.908519] usb 2-5: reset high speed USB device using ehci_hcd and address 5
[  166.152519] usb 2-5: reset high speed USB device using ehci_hcd and address 5
[  166.400023] usb 2-5: reset high speed USB device using ehci_hcd and address 5
[  176.644021] usb 2-5: reset high speed USB device using ehci_hcd and address 5
[  176.778803] sd 10:0:0:0: Device offlined - not ready after error recovery
[  176.778848] sd 10:0:0:0: rejecting I/O to offline device
[  176.778857] sd 10:0:0:0: rejecting I/O to offline device
[  176.778862] sd 10:0:0:0: rejecting I/O to offline device
[  176.778866] sd 10:0:0:0: [sdc] READ CAPACITY failed
[  176.778867] sd 10:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[  176.778871] sd 10:0:0:0: [sdc] Sense not available.
[  176.778875] sd 10:0:0:0: rejecting I/O to offline device
[  176.778879] sd 10:0:0:0: [sdc] Write Protect is off
[  176.778881] sd 10:0:0:0: [sdc] Mode Sense: 00 00 00 00
[  176.778882] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[  176.778985] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[  176.779096] sd 10:0:0:0: Attached scsi generic sg3 type 0
[  176.783299] sd 10:0:0:1: [sdd] Attached SCSI removable disk
[  176.783703] sd 10:0:0:1: Attached scsi generic sg4 type 0
[  176.785540] sd 10:0:0:2: [sde] Attached SCSI removable disk
[  176.785892] sd 10:0:0:2: Attached scsi generic sg5 type 0
[  176.790290] sd 10:0:0:3: [sdf] Attached SCSI removable disk
[  176.790649] sd 10:0:0:3: Attached scsi generic sg6 type 0
[  176.795827] sd 10:0:0:4: [sdg] Attached SCSI removable disk
[  176.796254] sd 10:0:0:4: Attached scsi generic sg7 type 0

[TheHardDisk]

I can confirm this issue as well. Light turns green when a memory card is inserted. Then nothing, I know it is detected fine and works since I can use it when i enable usb support for it in Virtualbox with Windows XP as a guest.

lsusb:

Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader

dmesg:

[ 1171.492387] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 1181.172290] usb 2-1: reset full speed USB device using ohci_hcd and address 2
[ 1191.560328] usb 2-1: reset full speed USB device using ohci_hcd and address 2
[ 1207.972029] usb 2-1: reset full speed USB device using ohci_hcd and address 2
[ 1208.360108] usb 2-1: reset full speed USB device using ohci_hcd and address 2
[ 1218.740036] usb 2-1: reset full speed USB device using ohci_hcd and address 2
[ 1218.946971] sd 6:0:0:0: Device offlined - not ready after error recovery
[ 1831.013226] udev: starting version 147
[ 1902.212042] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 1902.355644] usb 1-2: configuration #1 chosen from 1 choice
[ 1902.356574] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1902.357339] usb-storage: device found at 6
[ 1902.357342] usb-storage: waiting for device to settle before scanning
[ 1907.364200] usb-storage: device scan complete