Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 9.04 Grub Error 2

  1. #1
    Join Date
    Jul 2007
    Beans
    34

    Exclamation 9.04 Grub Error 2

    gets to grub stage 1.5 then Error 2 occurs


    menu.lst

    # menu.lst - See: grub(8), info grub, update-grub(8)
    # grub-install(8), grub-floppy(8),
    # grub-md5-crypt, /usr/share/doc/grub
    # and /usr/share/doc/grub-doc/.

    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    #
    # You can specify 'saved' instead of a number. In this case, the default entry
    # is the entry saved with the command 'savedefault'.
    # WARNING: If you are using dmraid do not use 'savedefault' or your
    # array will desync and will not let you boot your system.
    default 0

    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout 10

    ## hiddenmenu
    # Hides the menu by default (press ESC to see the menu)
    #hiddenmenu

    # Pretty colours
    #color cyan/blue white/blue

    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line) and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret

    #
    # examples
    #
    # title Windows 95/98/NT/2000
    # root (hd0,0)
    # makeactive
    # chainloader +1
    #
    # title Linux
    # root (hd0,1)
    # kernel /vmlinuz root=/dev/hda2 ro
    #

    #
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

    ### BEGIN AUTOMAGIC KERNELS LIST
    ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
    ## by the debian update-grub script except for the default options below

    ## DO NOT UNCOMMENT THEM, Just edit them to your needs

    ## ## Start Default Options ##
    ## default kernel options
    ## default kernel options for automagic boot options
    ## If you want special options for specific kernels use kopt_x_y_z
    ## where x.y.z is kernel version. Minor versions can be omitted.
    ## e.g. kopt=root=/dev/hda1 ro
    ## kopt_2_6_8=root=/dev/hdc1 ro
    ## kopt_2_6_8_2_686=root=/dev/hdc2 ro
    # kopt=root=UUID=258c88ed-3e3c-4b7b-85ff-df042eb99f38 ro

    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=258c88ed-3e3c-4b7b-85ff-df042eb99f38

    ## should update-grub create alternative automagic boot options
    ## e.g. alternative=true
    ## alternative=false
    # alternative=true

    ## should update-grub lock alternative automagic boot options
    ## e.g. lockalternative=true
    ## lockalternative=false
    # lockalternative=false

    ## additional options to use with the default boot option, but not with the
    ## alternatives
    ## e.g. defoptions=vga=791 resume=/dev/hda5
    # defoptions=quiet splash

    ## should update-grub lock old automagic boot options
    ## e.g. lockold=false
    ## lockold=true
    # lockold=false

    ## Xen hypervisor options to use with the default Xen boot option
    # xenhopt=

    ## Xen Linux kernel options to use with the default Xen boot option
    # xenkopt=console=tty0

    ## altoption boot targets option
    ## multiple altoptions lines are allowed
    ## e.g. altoptions=(extra menu suffix) extra boot options
    ## altoptions=(recovery) single
    # altoptions=(recovery mode) single

    ## controls how many kernels should be put into the menu.lst
    ## only counts the first occurence of a kernel, not the
    ## alternative kernel options
    ## e.g. howmany=all
    ## howmany=7
    # howmany=all

    ## specify if running in Xen domU or have grub detect automatically
    ## update-grub will ignore non-xen kernels when running in domU and vice versa
    ## e.g. indomU=detect
    ## indomU=true
    ## indomU=false
    # indomU=detect

    ## should update-grub create memtest86 boot option
    ## e.g. memtest86=true
    ## memtest86=false
    # memtest86=true

    ## should update-grub adjust the value of the default booted system
    ## can be true or false
    # updatedefaultentry=false

    ## should update-grub add savedefault to the default options
    ## can be true or false
    # savedefault=false

    ## ## End Default Options ##

    title Ubuntu 9.04, kernel 2.6.28-11-generic
    uuid 258c88ed-3e3c-4b7b-85ff-df042eb99f38
    kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=258c88ed-3e3c-4b7b-85ff-df042eb99f38 ro quiet splash
    initrd /boot/initrd.img-2.6.28-11-generic
    quiet

    title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
    uuid 258c88ed-3e3c-4b7b-85ff-df042eb99f38
    kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=258c88ed-3e3c-4b7b-85ff-df042eb99f38 ro single
    initrd /boot/initrd.img-2.6.28-11-generic

    title Ubuntu 9.04, memtest86+
    uuid 258c88ed-3e3c-4b7b-85ff-df042eb99f38
    kernel /boot/memtest86+.bin
    quiet

    ### END DEBIAN AUTOMAGIC KERNELS LIST

    # This is a divider, added to separate the menu items below from the Debian
    # ones.
    title Other operating systems:
    root


    # This entry automatically added by the Debian installer for a non-linux OS
    # on /dev/sdb2
    title Microsoft Windows XP Professional
    rootnoverify (hd1,1)
    savedefault
    map (hd0) (hd1)
    map (hd1) (hd0)
    chainloader +1

    fdisk -l
    Disk /dev/sda: 164.6 GB, 164696555520 bytes
    255 heads, 63 sectors/track, 20023 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x816e7fa1

    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 19329 155260161 83 Linux
    /dev/sda2 19330 20023 5574555 5 Extended
    /dev/sda5 19330 20023 5574523+ 82 Linux swap / Solaris

    Disk /dev/sdb: 40.0 GB, 40020664320 bytes
    255 heads, 63 sectors/track, 4865 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x02800280

    Device Boot Start End Blocks Id System
    /dev/sdb2 * 2614 4865 18089189+ 7 HPFS/NTFS
    /dev/sdb3 2 2613 20980890 f W95 Ext'd (LBA)
    /dev/sdb5 2 2613 20980858+ 7 HPFS/NTFS

    Partition table entries are not in disk order
    tried reinstalling and tried to restore grub

    i think it has something to do with
    "Partition table entries are not in disk order"
    but i dont know how to fix this

    i recently used gparted to create a 40gb ntfs partition on my SATA drive
    last resort is to reformat the whole drive

    any help?

  2. #2
    Join Date
    Jul 2007
    Beans
    34

    Re: 9.04 Grub Error 2

    bump

  3. #3
    Join Date
    Apr 2008
    Beans
    3,317
    Distro
    Kubuntu 9.10 Karmic Koala

    Re: 9.04 Grub Error 2

    bump
    Please wait for 24 hour before bumping a thread.

    i recently used gparted to create a 40gb ntfs partition on my SATA drive
    ???? fdisk does not show any 40gb ntfs partition.

    gets to grub stage 1.5 then Error 2 occurs
    Is this a fresh install of ubuntu 9.04 or did you update from an earlier version of Ubuntu?

    i think it has something to do with
    "Partition table entries are not in disk order"
    No. Having the partition table enties not in disk order should not cause any problems.

    Try this. Boot from the Ubuntu LiveCD, open a terminal and reinstall grub via

    Code:
    sudo mount /dev/sda1 /mnt
    sudo grub-install --root-directory=/mnt --recheck /dev/sda
    Reboot and make sure that your bios are set to boot from the Ubuntu drive.


    If this did not cure your problem:

    In order to get a clearer picture of your setup, I suggest download the Boot Info Script to the desktop of the Ubuntu LiveCD:

    https://sourceforge.net/projects/bootinfoscript/

    Then open a terminal (Applications > Accessories > Terminal) and type:

    Code:
    sudo bash ~/Desktop/boot_info_script*.sh
    That will create a "RESULTS.txt" file in the same directory from where the script is run, namely your desktop; please copy/paste the contents of the RESULTS.txt file to your next post,(use the code tags)

  4. #4
    Join Date
    Jul 2007
    Beans
    34

    Re: 9.04 Grub Error 2

    sorry, didnt know about the bump rule!

    i will try those and get back to you, thanks!


    Edit:

    ubuntu@ubuntu:~$ sudo grub-install --root-directory=/mnt --recheck /dev/sda
    Probing devices to guess BIOS drives. This may take a long time.
    grub-probe: error: Cannot open `/boot/grub/device.map'
    [: 494: =: unexpected operator
    Installing GRUB to /dev/sda as (hd0)...
    Installation finished. No error reported.
    This is the contents of the device map /mnt/boot/grub/device.map.
    Check if this is correct or not. If any of the lines is incorrect,
    fix it and re-run the script `grub-install'.

    (fd0) /dev/fd0
    (hd0) /dev/sda
    (hd1) /dev/sdb

    is "[: 494: =: unexpected operator" a problem?

  5. #5
    Join Date
    Jul 2007
    Beans
    34

    Re: 9.04 Grub Error 2

    thank you, that worked!

    ran command and switched primary drive

  6. #6
    Join Date
    Apr 2008
    Beans
    3,317
    Distro
    Kubuntu 9.10 Karmic Koala

    Re: 9.04 Grub Error 2

    Great. Have fun with Jaunty.

  7. #7
    Join Date
    Aug 2006
    Beans
    12
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: 9.04 Grub Error 2

    Hey,

    I'm having a similar problem. I used the alternate disc to install Jaunty with the option "Guided - encrypted LVM". The installation process went through as usual. However, when the installation was done and the machine rebooted, Grub gave me the "Error 2" message.

    I, then, re-installed Jaunty using the LiveCD. It worked; I was able to boot into Ubuntu just fine. I'm typing this from my laptop and not my desktop (where the issue is) because I tried reinstalling from the alternate disc and doing the grub-install as you indicated. That did not work, now I boot into a grub prompt, only.

    My desktop (an MSI Wind barebone) has a CF card it registers as /dev/sda and an HDD it reads as /dev/sdb. My boot partition is on /dev/sdb5.

    Any suggestions?

    Code:
    ============================= Boot Info Summary: ==============================
    
     => Grub0.97 is installed in the MBR of /dev/sda and looks on boot drive #2 in 
        partition #5 for /grub/stage2 and /grub/menu.lst.
     => Grub0.97 is installed in the MBR of /dev/sdb and looks on the same drive 
        in partition #5 for /boot/grub/stage2 and /boot/grub/menu.lst.
    
    sda1: _________________________________________________________________________
    
        File system:       ext4
        Boot sector type:  -
        Boot sector info:  
        Operating System:  
        Boot files/dirs:   
    
    sdb1: _________________________________________________________________________
    
        File system:       ext3
        Boot sector type:  Unknown
        Boot sector info:  
        Mounting failed:
    mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
           missing codepage or helper program, or other error
           In some cases useful info is found in syslog - try
           dmesg | tail  or so
    
    
    sdb2: _________________________________________________________________________
    
        File system:       Extended Partition
        Boot sector type:  -
        Boot sector info:  
    
    sdb5: _________________________________________________________________________
    
        File system:       ext2
        Boot sector type:  Grub
        Boot sector info:  Grub0.97 is installed in the boot sector of sdb5 and 
                           looks at sector 976363299 of the same hard drive for 
                           the stage2 file. A stage2 file is at this location on 
                           /dev/sdb. Stage2 looks on partition #5 for 
                           /boot/grub/menu.lst.
        Operating System:  
        Boot files/dirs:   /boot/grub/menu.lst
    
    =========================== Drive/Partition Info: =============================
    
    Drive: sda ___________________ _____________________________________________________
    
    Disk /dev/sda: 512 MB, 512483328 bytes
    255 heads, 63 sectors/track, 62 cylinders, total 1000944 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Disk identifier: 0x00000001
    
    Partition  Boot         Start           End          Size  Id System
    
    /dev/sda1    *             63       996,029       995,967  83 Linux
    
    
    Drive: sdb ___________________ _____________________________________________________
    
    Disk /dev/sdb: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Disk identifier: 0x0009a3df
    
    Partition  Boot         Start           End          Size  Id System
    
    /dev/sdb1                  63   976,270,049   976,269,987  83 Linux
    /dev/sdb2         976,270,050   976,768,064       498,015   5 Extended
    /dev/sdb5         976,270,113   976,768,064       497,952  83 Linux
    
    
    blkid -c /dev/null: ____________________________________________________________
    
    /dev/loop0: TYPE="squashfs" 
    /dev/sda1: UUID="48e8ae8b-917c-49d0-ad6c-106b9426cb59" TYPE="ext4" 
    /dev/sdb1: UUID="4d959528-f9c6-473c-a641-e3f61cc49e0e" SEC_TYPE="ext2" TYPE="ext3" 
    /dev/sdb5: UUID="2528ad7a-8ca2-4566-8977-bd440900dfb9" TYPE="ext2" 
    
    =============================== "mount" output: ===============================
    
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
    tmpfs on /lib/modules/2.6.28-11-generic/volatile type tmpfs (rw,mode=0755)
    tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
    varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
    varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
    udev on /dev type tmpfs (rw,mode=0755)
    tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
    devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
    rootfs on / type rootfs (rw)
    /dev/sr0 on /cdrom type iso9660 (ro,noatime)
    /dev/loop0 on /rofs type squashfs (ro,noatime)
    fusectl on /sys/fs/fuse/connections type fusectl (rw)
    tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
    binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
    gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
    /dev/sda1 on /media/disk type ext4 (rw,nosuid,nodev,uhelper=hal)
    /dev/sdb5 on /media/disk-1 type ext2 (rw,nosuid,nodev,uhelper=hal)
    
    
    =========================== sdb5/boot/grub/menu.lst: ===========================
    
    # menu.lst - See: grub(8), info grub, update-grub(8)
    #            grub-install(8), grub-floppy(8),
    #            grub-md5-crypt, /usr/share/doc/grub
    #            and /usr/share/doc/grub-doc/.
    
    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    #
    # You can specify 'saved' instead of a number. In this case, the default entry
    # is the entry saved with the command 'savedefault'.
    # WARNING: If you are using dmraid do not use 'savedefault' or your
    # array will desync and will not let you boot your system.
    default		0
    
    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout		3
    
    ## hiddenmenu
    # Hides the menu by default (press ESC to see the menu)
    hiddenmenu
    
    # Pretty colours
    #color cyan/blue white/blue
    
    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line)  and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    #      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret
    
    #
    # examples
    #
    # title		Windows 95/98/NT/2000
    # root		(hd0,0)
    # makeactive
    # chainloader	+1
    #
    # title		Linux
    # root		(hd0,1)
    # kernel	/vmlinuz root=/dev/hda2 ro
    #
    
    #
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
    
    ### BEGIN AUTOMAGIC KERNELS LIST
    ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
    ## by the debian update-grub script except for the default options below
    
    ## DO NOT UNCOMMENT THEM, Just edit them to your needs
    
    ## ## Start Default Options ##
    ## default kernel options
    ## default kernel options for automagic boot options
    ## If you want special options for specific kernels use kopt_x_y_z
    ## where x.y.z is kernel version. Minor versions can be omitted.
    ## e.g. kopt=root=/dev/hda1 ro
    ##      kopt_2_6_8=root=/dev/hdc1 ro
    ##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
    # kopt=root=/dev/mapper/BlackBox-root ro
    
    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=5c327fae-119a-4dc6-a355-545e3c6c52ff
    
    ## should update-grub create alternative automagic boot options
    ## e.g. alternative=true
    ##      alternative=false
    # alternative=true
    
    ## should update-grub lock alternative automagic boot options
    ## e.g. lockalternative=true
    ##      lockalternative=false
    # lockalternative=false
    
    ## additional options to use with the default boot option, but not with the
    ## alternatives
    ## e.g. defoptions=vga=791 resume=/dev/hda5
    # defoptions=quiet splash
    
    ## should update-grub lock old automagic boot options
    ## e.g. lockold=false
    ##      lockold=true
    # lockold=false
    
    ## Xen hypervisor options to use with the default Xen boot option
    # xenhopt=
    
    ## Xen Linux kernel options to use with the default Xen boot option
    # xenkopt=console=tty0
    
    ## altoption boot targets option
    ## multiple altoptions lines are allowed
    ## e.g. altoptions=(extra menu suffix) extra boot options
    ##      altoptions=(recovery) single
    # altoptions=(recovery mode) single
    
    ## controls how many kernels should be put into the menu.lst
    ## only counts the first occurence of a kernel, not the
    ## alternative kernel options
    ## e.g. howmany=all
    ##      howmany=7
    # howmany=all
    
    ## specify if running in Xen domU or have grub detect automatically
    ## update-grub will ignore non-xen kernels when running in domU and vice versa
    ## e.g. indomU=detect
    ##      indomU=true
    ##      indomU=false
    # indomU=detect
    
    ## should update-grub create memtest86 boot option
    ## e.g. memtest86=true
    ##      memtest86=false
    # memtest86=true
    
    ## should update-grub adjust the value of the default booted system
    ## can be true or false
    # updatedefaultentry=false
    
    ## should update-grub add savedefault to the default options
    ## can be true or false
    # savedefault=false
    
    ## ## End Default Options ##
    
    title		Ubuntu 9.04, kernel 2.6.28-11-generic
    uuid		5c327fae-119a-4dc6-a355-545e3c6c52ff
    kernel		/vmlinuz-2.6.28-11-generic root=/dev/mapper/BlackBox-root ro quiet splash 
    initrd		/initrd.img-2.6.28-11-generic
    quiet
    
    title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
    uuid		5c327fae-119a-4dc6-a355-545e3c6c52ff
    kernel		/vmlinuz-2.6.28-11-generic root=/dev/mapper/BlackBox-root ro  single
    initrd		/initrd.img-2.6.28-11-generic
    
    title		Ubuntu 9.04, memtest86+
    uuid		5c327fae-119a-4dc6-a355-545e3c6c52ff
    kernel		/memtest86+.bin
    quiet
    
    ### END DEBIAN AUTOMAGIC KERNELS LIST
    
    =================== sdb5: Location of files loaded by Grub: ===================
    
    
     500.0GB: boot/grub/menu.lst
     500.0GB: boot/grub/stage2
     499.8GB: boot/initrd.img-2.6.28-11-generic
     499.8GB: boot/vmlinuz-2.6.28-11-generic
     499.8GB: grub/stage2
    =========================== Unknown MBRs/Boot Sectors/etc =======================
    
    Unknown BootLoader  on sdb1
    
    00000000  4c 55 4b 53 ba be 00 01  61 65 73 00 00 00 00 00  |LUKS....aes.....|
    00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000020  00 00 00 00 00 00 00 00  63 62 63 2d 65 73 73 69  |........cbc-essi|
    00000030  76 3a 73 68 61 32 35 36  00 00 00 00 00 00 00 00  |v:sha256........|
    00000040  00 00 00 00 00 00 00 00  73 68 61 31 00 00 00 00  |........sha1....|
    00000050  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000060  00 00 00 00 00 00 00 00  00 00 08 08 00 00 00 20  |............... |
    00000070  53 de ec e6 e9 07 ed 2f  fd 2f fd f0 81 9a ab ee  |S.....././......|
    00000080  37 5c 93 e4 45 cf 4d 93  12 db 75 cd dc 3c 97 96  |7\..E.M...u..<..|
    00000090  4a c3 e3 6d a7 ad ec d9  7b b0 f0 35 58 35 b1 77  |J..m....{..5X5.w|
    000000a0  b7 0e 30 79 00 00 00 0a  66 31 37 34 35 36 34 62  |..0y....f174564b|
    000000b0  2d 61 31 37 63 2d 34 65  36 32 2d 38 36 38 31 2d  |-a17c-4e62-8681-|
    000000c0  39 66 32 31 35 35 38 62  62 32 36 64 00 00 00 00  |9f21558bb26d....|
    000000d0  00 ac 71 f3 00 01 5e 1c  b3 ad f3 7f 43 c6 e0 5f  |..q...^.....C.._|
    000000e0  c8 44 b3 17 8f d3 67 5b  8d f1 14 bd 7c 57 d1 b7  |.D....g[....|W..|
    000000f0  48 a9 41 84 cd df 54 d5  00 00 00 08 00 00 0f a0  |H.A...T.........|
    00000100  00 00 de ad 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000110  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000120  00 00 00 00 00 00 00 00  00 00 01 08 00 00 0f a0  |................|
    00000130  00 00 de ad 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000140  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000150  00 00 00 00 00 00 00 00  00 00 02 08 00 00 0f a0  |................|
    00000160  00 00 de ad 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000170  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000180  00 00 00 00 00 00 00 00  00 00 03 08 00 00 0f a0  |................|
    00000190  00 00 de ad 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    000001b0  00 00 00 00 00 00 00 00  00 00 04 08 00 00 0f a0  |................|
    000001c0  00 00 de ad 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    000001e0  00 00 00 00 00 00 00 00  00 00 05 08 00 00 0f a0  |................|
    000001f0  00 00 de ad 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000200
    
    
    =======Devices which don't seem to have a corresponding hard drive==============
    
    sdc
    Last edited by pandasonic; April 26th, 2009 at 03:28 AM. Reason: Results.txt from the Boot Info Script.

  8. #8
    Join Date
    Oct 2006
    Beans
    6

    Re: 9.04 Grub Error 2

    I'm getting the same error.

    Wtf? 8.04/8.10 install fine.

  9. #9
    Join Date
    Oct 2006
    Location
    Olympia, WA
    Beans
    232
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: 9.04 Grub Error 2

    I am getting the same error. I have 2 40 gig IDE drives, one for Windows and one for Ubuntu and a 500 gig SATA for storage. I get Error 2. one thing I noticed during install was it labeled all 3 drives scsi and labeled them as sda, sdb sdc. I thought that 2 should have been hdx but I am not an expert with Linux.

    any ideas?
    Brad
    Phenom II X4 955 (@4080MHz), 8GB (4x2) DDR3 1333 (@1600), GTX 460 2GB, Ubuntu 12.04 64 bit, Win 7 Ultimate 64 bit

  10. #10
    Join Date
    Apr 2008
    Beans
    3,317
    Distro
    Kubuntu 9.10 Karmic Koala

    Re: 9.04 Grub Error 2

    pandasonic: I don't know anything about encrypted LVM. I suggest to start a new thread to get better help.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •