No Internet on Top of the line Laptop--help!!!

[rreyes1316]

While my frien was ill about 2 years ago. We would joke about his assets and how much I wanted his laptop. It was our way of trying to shed some humor on his renal failure and dire need of a kidney. Well . . .he decided to send it to me and there really is not much that can be done with it. He had XP Pro on it--which was very straining on it--and I decided to put Xubuntu on it. We both decided this would be the year we would boot windows and move over to Ubuntu. I am about 90% converted but have a few issues to iron out on my pc.

Anyhow, as a learning tool and for the experience, I have been toying with his laptop he gave me. This is what we have to work with:

Powerful Intel Celeron Performance, 700 MHZ of blazing fast PIII performance, 24 X CDRom, Dual Scan 13" screen, 64 megs(upgraded to 128) of on board memory (upgraded to 192 megs), a hefty 10 gig hard drive for plenty of storage, built in floppy drive, on board 56K V90 modem, 4 megs on board video, 100 MHZ front size bus, 128 bit PC 100 front side bus, stereo speakers, Wi-Fi compatible, serial port, parallel port, RJ45 jack, 2 PCMCIA slots, 2 USB.

Aside from the futuristic specs, it actually works with Xubuntu as a web browser--if I could get it connected to the Net, however. So I hope you can help.

Thank

[tommcd]

How are you trying to connect to the internet? From ethernet? wireless? Are you using cable, DSL, or something else? Do you use dhcp or static ip address?
Open up a terminal and run:

lspci -v

Your ethernet and wireless devices will be near the end of that output. Post those parts of lspci here.
Also run

ifconfig

and

ifconfig -a

and post the output of those as well.
Getting connected via wired ethernet should not be difficult.

[rreyes1316]

Um, DUH!!! My bad . . .I forgot to mention that detail

I am trying to connect with the RJ45 dsl cable. I am connecting through a lynksys router--I have comcast. I was trying to use the ViewSonic PCMCIA Wireless 802.11g PC Card my buddy gave me, byt that did nor work either

[rreyes1316]

DAMN that took a while--sorry.

Hope I have all the info correct. Here it is:


lspci -v

Communication Controller : Agere System LT WinModem
Subsystem:Askey Computer Corp. Device 4005
Flags: medium devsel, IRQ 10
Memory at fc011000 (32-bit, non-prefetchable) [disabled] [size=256]
I/O ports at 1080 [disabled] [size=8]
I/O ports at 1400 [disabled] [size=256]
Capabilities: <access denied>

Network controller: Broadcom Corporation BCM4306 802.11b/g wireless LAN Controller (rev 03)
Subsystem: Device 0543:1a10
Flags: bus master, fast devsel, latency 64, IRQ 10
Memory at 1c000000 (32-bit, non-prefetchable) [size=8k]
kernal driver in use: b43-pci-bridge
kernel modules: ssb

ipconfig

bash: ipconfig: command not found

ipconfig -a

bash: ipconfig: command not found

[tommcd]

[QUOTE=rreyes1316;7123563
I am trying to connect with the RJ45 dsl cable. I am connecting through a lynksys router--I have comcast. I was trying to use the ViewSonic PCMCIA Wireless 802.11g PC Card my buddy gave me, byt that did nor work either [/QUOTE]
So you have cable internet and connect via dhcp? Is that correct?

[rreyes1316]

yes

I appreciate your help, thanks in advance.

[tommcd]

lspci -v
Communication Controller : Agere System LT WinModem
Subsystem:Askey Computer Corp. Device 4005

Network controller: Broadcom Corporation BCM4306 802.11b/g wireless LAN Controller (rev 03)

ipconfig

It is ifconfig and ifconfig -a, not iPconfig.
It looks like you have a dial-up modem, and a wireless card. And you have no ethernet jack on the laptop. Is that correct?

For your Broadcom wireless, see these guides:
http://www.foogazi.com/2008/04/28/ho...in-ubuntu-804/
https://help.ubuntu.com/community/Wi...Driver/bcm43xx
First, disable all encryption on the router, then try to connect via the wireless. If you can connect, then post what kind of encryption you are using (if any) and we can go from there.

[rreyes1316]

here it is again. I thought it was "IP" not "IF":


laptop@laptop-laptop:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
Flags: bus master, 66MHz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc100000-fdffffff
Prefetchable memory behind bridge: 20000000-200fffff
Kernel modules: shpchp

00:04.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 20100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10000000-13fff000 (prefetchable)
Memory window 1: 14000000-17fff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

00:04.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 20101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 18000000-1bfff000 (prefetchable)
Memory window 1: 1c000000-1ffff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 1050 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at 1060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:08.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at fc010000 (32-bit, non-prefetchable) [size=4K]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: CS4281
Kernel modules: snd-cs4281

00:10.0 Communication controller: Agere Systems LT WinModem
Subsystem: Askey Computer Corp. Device 4005
Flags: medium devsel, IRQ 10
Memory at fc011000 (32-bit, non-prefetchable) [disabled] [size=256]
I/O ports at 1080 [disabled] [size=8]
I/O ports at 1400 [disabled] [size=256]
Capabilities: <access denied>

01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, stepping, medium devsel, latency 66, IRQ 10
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 2000 [size=256]
Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: atyfb

06:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: Device 0543:1a10
Flags: bus master, fast devsel, latency 64, IRQ 10
Memory at 1c000000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb

laptop@laptop-laptop:~$ ipconfig
bash: ipconfig: command not found
laptop@laptop-laptop:~$ ipconfig -a
bash: ipconfig: command not found
laptop@laptop-laptop:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644 (644.0 B) TX bytes:644 (644.0 B)

laptop@laptop-laptop:~$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644 (644.0 B) TX bytes:644 (644.0 B)

pan0 Link encap:Ethernet HWaddr 02:46:10:4f:56:4f
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

wlan0 Link encap:Ethernet HWaddr 00:90:4b:bd:1e:99
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

wmaster0 Link encap:UNSPEC HWaddr 00-90-4B-BD-1E-99-00-00-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


Also, there is a eternet jack.

[tommcd]

So how are you trying to connect to the internet? Are you trying to connect via ethernet and dhcp via comcast cable? Do you have an ethernet cable plugged in?
Or are you trying to connect via wireless??

Once again,
Are you trying to connect via ethernet???
Or wireless???

[rreyes1316]

Sorry about that. It was late and have to work.

Right now, I am trying to connect via ethernet.

Once I get that up and running I will try wireless.