Results 1 to 2 of 2

Thread: Samba problems in 8.10

  1. #1
    Join Date
    Mar 2008
    Location
    Denmark
    Beans
    107

    Samba problems in 8.10

    I have upgrade from 8.04 to 8.10, but I can't get my network working after upgrading

    here is my smb config ... maybe someone kan see a problem

    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    # - When such options are commented with ";", the proposed setting
    # differs from the default Samba behaviour
    # - When commented with "#", the proposed setting is the default
    # behaviour of Samba but the option is considered important
    # enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.
    # A well-established practice is to name the original file
    # "smb.conf.master" and create the "real" config file with
    # testparm -s smb.conf.master >smb.conf
    # This minimizes the size of the really used smb.conf file
    # which, according to the Samba Team, impacts performance
    #

    #======================= Global Settings =======================

    [global]

    ## Browsing/Identification ###

    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = MSHOME

    # server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    # wins support = yes

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z

    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ; name resolve order = lmhosts host wins bcast

    #### Networking ####

    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ; interfaces = 127.0.0.0/8 eth0

    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself. However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ; bind interfaces only = yes



    #### Debugging/Accounting ####

    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m

    # Cap the size of the individual log files (in KiB).
    max log size = 1000

    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    # syslog only = no

    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0

    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


    ####### Authentication #######

    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
    # Username security options
    security = user
    username map = /etc/samba/smbusers
    guest account = henrik
    invalid users = root


    # You may wish to use password encryption. See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
    encrypt passwords = yes

    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    passdb backend = tdbsam

    obey pam restrictions = yes

    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    unix password sync = yes

    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    pam password change = yes

    # This option controls how unsuccessful authentication attempts are mapped
    # to anonymous connections
    map to guest = bad user

    ########## Domains ###########

    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ; domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ; logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    # logon path = \\%N\%U\profile

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ; logon drive = H:
    # logon home = \\%N\%U

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ; logon script = logon.cmd

    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe. The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

    ########## Printing ##########

    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    # load printers = yes

    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ; printing = bsd
    ; printcap name = /etc/printcap

    # CUPS printing. See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ; printing = cups
    ; printcap name = cups

    ############ Misc ############

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ; include = /home/samba/etc/smb.conf.%m

    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    # SO_RCVBUF=8192 SO_SNDBUF=8192
    # socket options = TCP_NODELAY

    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    # domain master = auto

    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ; idmap uid = 10000-20000
    ; idmap gid = 10000-20000
    ; template shell = /bin/bash

    # The following was the default behaviour in sarge,
    # but samba upstream reverted the default because it might induce
    # performance issues in large organizations.
    # See Debian bug #368251 for some of the consequences of *not*
    # having this setting and smb.conf(5) for details.
    ; winbind enum groups = yes
    ; winbind enum users = yes

    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.

    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ; usershare max shares = 100

    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    usershare allow guests = yes

    #======================= Share Definitions =======================

    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares. This will share each
    # user's home directory as \\server\username
    ;[homes]
    ; comment = Home Directories
    ; browseable = no

    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    ; read only = yes

    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ; create mask = 0700

    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ; directory mask = 0700

    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server. Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    ; valid users = %S

    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ; comment = Network Logon Service
    ; path = /home/samba/netlogon
    ; guest ok = yes
    ; read only = yes
    ; share modes = no

    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ; comment = Users profiles
    ; path = /home/samba/profiles
    ; guest ok = no
    ; browseable = no
    ; create mask = 0600
    ; directory mask = 0700

    [printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    guest ok = no
    read only = yes
    create mask = 0700

    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    browseable = yes
    read only = yes
    guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ; write list = root, @ntadmin

    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ; comment = Samba server's CD-ROM
    ; read only = yes
    ; locking = no
    ; path = /cdrom
    ; guest ok = yes

    # The next two parameters show how to auto-mount a CD-ROM when the
    # cdrom share is accesed. For this to work /etc/fstab must contain
    # an entry like this:
    #
    # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    # is mounted on /cdrom
    #
    ; preexec = /bin/mount /cdrom
    ; postexec = /bin/umount /cdrom

    [delte filer]
    path = /media/diverse/delte filer
    public = yes
    writable = yes
    Last edited by swotie; February 21st, 2009 at 08:42 AM.

  2. #2
    Join Date
    Jan 2006
    Location
    Not heaven... Iowa
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Samba problems in 8.10

    Quote Originally Posted by swotie View Post
    [delte filer]
    path = /media/diverse/delte filer
    public = yes
    writable = yes
    Probably the space in the pathname is causing problems. Might be an issue in share name.
    Last edited by Iowan; February 22nd, 2009 at 12:00 AM.
    Linux User #415691 Ubuntu User #8629
    Iowa Team (LoCo): [Wiki] [Launchpad]
    IRC channel: #ubuntu-us-ia on irc.freenode.net

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •