Results 1 to 10 of 10

Thread: No em funciona l'audio Asus M50

  1. #1
    Join Date
    Feb 2009
    Beans
    8

    Red face No em funciona l'audio Asus M50

    soc un poc nou al mon de ubuntu un amic mel va aconsellar i estic provante es molt interesant pero hi ha alguns problemes amb el sistema que no he pogut solventar, he buscat per els foros i he intenta tot el que maconsellaven pero res, aquest es el meu problema sera una tonteria pero estic perdudisim:
    no puc sentir res, ningun soroll del sistema, ni musica, ni pelicules, ni el soroll de amsn, ni res he instalat el alsa o he configurat tot per a alsa pero res, no es soluciona espere que algu sapiga el que em pasa,

    el meu portatil es un asus M50Cseres cpu duoP8400

    gracies anticipades per la ajuda

  2. #2
    Join Date
    Apr 2007
    Location
    Alt Maresme
    Beans
    2,997

    Re: hola a tots espere que em pugueu ajudar

    Hola Juanal, benvingut al fòrum.

    Abans que res, et demanaria que fessis una bona llegida a les normés de comportament a les que ens intentem acostar: http://ubuntuforums.org/showthread.php?t=599965.

    Per poder mirar d'ajudar-te, caldria saber quina placa d'audio porta el teu equip (un mateix model en pot portar diferents per a diferents remeses o sub-versions).

    Fes a un terminal:

    Code:
    lspci -vv
    I enganxa el que et mostri aquí mateix, ficant-ho dins l'etiqueta CODE que surt en fer clic damunt la icona #.

    També necessitem saber quina versió de nucli estàs executant. Fes:


    Code:
    uname -a
    i enganxa el resultat.
    Tingueu presents les normes d'or dels fòrums d'Ubuntu: poseu un títol entenedor i apropiat als vostres fils; digueu quina versió i variant d'Ubuntu feu servir i a quina màquina; i què heu provat abans de demanar ajut.

  3. #3
    Join Date
    Feb 2009
    Beans
    8

    Re: hola a tots espere que em pugueu ajudar

    Quote Originally Posted by papapep View Post
    Hola Juanal, benvingut al fòrum.

    Abans que res, et demanaria que fessis una bona llegida a les normés de comportament a les que ens intentem acostar: http://ubuntuforums.org/showthread.php?t=599965.

    Per poder mirar d'ajudar-te, caldria saber quina placa d'audio porta el teu equip (un mateix model en pot portar diferents per a diferents remeses o sub-versions).

    Fes a un terminal:

    Code:
    lspci -vv
    I enganxa el que et mostri aquí mateix, ficant-ho dins l'etiqueta CODE que surt en fer clic damunt la icona #.

    També necessitem saber quina versió de nucli estàs executant. Fes:


    Code:
    uname -a
    i enganxa el resultat.
    [CODE]09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    Subsystem: ASUSTeK Computer Inc. Device 1897
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 5
    Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    Subsystem: ASUSTeK Computer Inc. Device 1897
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 5
    Region 0: Memory at fdffec00 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    Subsystem: ASUSTeK Computer Inc. Device 1897
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 5
    Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    Subsystem: ASUSTeK Computer Inc. Device 1897
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin B routed to IRQ 5
    Region 0: Memory at fdffec00 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    [/CODE
    uname -a
    alberto@ubuntu:~$ uname -a
    Linux ubuntu 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686 GNU/Linux
    alberto@ubuntu:~$



    perdo la versio de ubuntu es 8.10. gracies
    Last edited by juanal; February 17th, 2009 at 11:14 PM.

  4. #4
    Join Date
    Apr 2007
    Location
    Alt Maresme
    Beans
    2,997

    Re: No em funciona l'audio Asus M50

    No cal que copiis dins la teva resposta el que està en els apunts anteriors si ja està just abans. Només va bé si cal especificar a qui es respon, quan hi ha diverses persones a un mateix fil.

    Crec que no has enganxat tot el que ha mostrat la ordre lspci. O això, o no tens ni gràfica, ni placa de xarxa, ni de wifi, ni d'audio...
    Tingueu presents les normes d'or dels fòrums d'Ubuntu: poseu un títol entenedor i apropiat als vostres fils; digueu quina versió i variant d'Ubuntu feu servir i a quina màquina; i què heu provat abans de demanar ajut.

  5. #5
    Join Date
    Feb 2009
    Beans
    8

    Re: No em funciona l'audio Asus M50

    .
    Code:
    Code:
    alberto@ubuntu:~$ lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
    03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    09:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    alberto@ubuntu:~$
    asi tens tot el que ma ixit cuan he pulsat enterinal la orde que mas dit.
    al portatil tinc tambe instalat el vista i en funciona tot correctament per el que crec que si que tinc tartjeta de so de xarxa i de wifi, o no te res a vorer?

  6. #6
    Join Date
    Feb 2009
    Beans
    8

    Re: No em funciona l'audio Asus M50

    .
    Code:
    alberto@ubuntu:~$ lspci -vv
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    	Latency: 0
    	Capabilities: <access denied>
    	Kernel modules: intel-agp
    
    00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    	I/O behind bridge: 0000c000-0000cfff
    	Memory behind bridge: f8000000-fbffffff
    	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 16
    	Region 4: I/O ports at bc00 [size=32]
    	Capabilities: <access denied>
    	Kernel driver in use: uhci_hcd
    	Kernel modules: uhci-hcd
    
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin B routed to IRQ 21
    	Region 4: I/O ports at b880 [size=32]
    	Capabilities: <access denied>
    	Kernel driver in use: uhci_hcd
    	Kernel modules: uhci-hcd
    
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin D routed to IRQ 19
    	Region 4: I/O ports at b800 [size=32]
    	Capabilities: <access denied>
    	Kernel driver in use: uhci_hcd
    	Kernel modules: uhci-hcd
    
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin C routed to IRQ 18
    	Region 0: Memory at f7fffc00 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: <access denied>
    	Kernel driver in use: ehci_hcd
    	Kernel modules: ehci-hcd
    
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1893
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 22
    	Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
    	Capabilities: <access denied>
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    	Memory behind bridge: fcf00000-fcffffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
    	I/O behind bridge: 0000d000-0000dfff
    	Memory behind bridge: fd000000-fddfffff
    	Prefetchable memory behind bridge: 00000000f4000000-00000000f6efffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
    	I/O behind bridge: 0000e000-0000efff
    	Memory behind bridge: fde00000-fdefffff
    	Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 23
    	Region 4: I/O ports at b480 [size=32]
    	Capabilities: <access denied>
    	Kernel driver in use: uhci_hcd
    	Kernel modules: uhci-hcd
    
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin B routed to IRQ 19
    	Region 4: I/O ports at b400 [size=32]
    	Capabilities: <access denied>
    	Kernel driver in use: uhci_hcd
    	Kernel modules: uhci-hcd
    
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin C routed to IRQ 18
    	Region 4: I/O ports at b080 [size=32]
    	Capabilities: <access denied>
    	Kernel driver in use: uhci_hcd
    	Kernel modules: uhci-hcd
    
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 23
    	Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: <access denied>
    	Kernel driver in use: ehci_hcd
    	Kernel modules: ehci-hcd
    
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
    	Memory behind bridge: fdf00000-fdffffff
    	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    	Capabilities: <access denied>
    
    00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Capabilities: <access denied>
    
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin B routed to IRQ 215
    	Region 0: I/O ports at b000 [size=8]
    	Region 1: I/O ports at ac00 [size=4]
    	Region 2: I/O ports at a880 [size=8]
    	Region 3: I/O ports at a800 [size=4]
    	Region 4: I/O ports at a480 [size=32]
    	Region 5: Memory at f7fff000 (32-bit, non-prefetchable) [size=2K]
    	Capabilities: <access denied>
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    
    01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1)
    	Subsystem: ASUSTeK Computer Inc. Device 19b2
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 16
    	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
    	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    	Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
    	Region 5: I/O ports at cc00 [size=128]
    	[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
    	Capabilities: <access denied>
    	Kernel driver in use: nvidia
    	Kernel modules: nvidiafb, nvidia
    
    03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
    	Subsystem: Intel Corporation Device 1201
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 214
    	Region 0: Memory at fcffe000 (64-bit, non-prefetchable) [size=8K]
    	Capabilities: <access denied>
    	Kernel driver in use: iwlagn
    	Kernel modules: iwlagn
    
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    	Subsystem: ASUSTeK Computer Inc. Device 16d5
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 0, Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 216
    	Region 0: I/O ports at e800 [size=256]
    	Region 2: Memory at f6fff000 (64-bit, prefetchable) [size=4K]
    	Region 4: Memory at f6fe0000 (64-bit, prefetchable) [size=64K]
    	Expansion ROM at fdef0000 [disabled] [size=64K]
    	Capabilities: <access denied>
    	Kernel driver in use: r8169
    	Kernel modules: r8169
    
    09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 16
    	Region 0: Memory at fdfff800 (32-bit, non-prefetchable) [size=2K]
    	Capabilities: <access denied>
    	Kernel driver in use: ohci1394
    	Kernel modules: ohci1394
    
    09:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 64, Cache Line Size: 32 bytes
    	Interrupt: pin B routed to IRQ 17
    	Region 0: Memory at fdfff400 (32-bit, non-prefetchable) [size=256]
    	Capabilities: <access denied>
    	Kernel driver in use: sdhci-pci
    	Kernel modules: sdhci-pci
    
    09:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 64, Cache Line Size: 32 bytes
    	Interrupt: pin B routed to IRQ 5
    	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
    	Capabilities: <access denied>
    	Kernel driver in use: ricoh-mmc
    	Kernel modules: ricoh_mmc
    
    09:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    	Subsystem: ASUSTeK Computer Inc. Device 1897
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    	Latency: 64, Cache Line Size: 32 bytes
    	Interrupt: pin B routed to IRQ 5
    	Region 0: Memory at fdffec00 (32-bit, non-prefetchable) [size=256]
    	Capabilities: <access denied>
    
    09:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
    	!!! Unknown header type 7f
    
    alberto@ubuntu:~$
    ara siq eu ficat el comando sorrectament, en podeu ajudar?, es posible que la configuracio del sistema al instalar ubuntu cometera algun error?
    el vista en funciona correctament
    gracies

  7. #7
    Join Date
    Feb 2009
    Location
    Rafelguaraf, PV
    Beans
    66
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: No em funciona l'audio Asus M50

    primer descarta totes les opcions "facils" abans de ficar-te a rebuscar drivers i configuracions.
    Mira a vore si tens tots els audios activats. on esta l'icona de l'audio (en un principi dalt a la dreta) fes doble click(o entra al mezclador) i puja totes les barres, i prova.
    A mi em passa això cada volta que faig una instal.lació en net...
    si no va, ves a sistema-preferencias-sonido, i posa-ho tot en alsa.

    Si açò no et funciona, ja no se que més fer... els entesos en la matèria t'ajudaran... i nosaltres continuarem l'aprenentatge...

  8. #8
    Join Date
    Feb 2009
    Beans
    8

    Re: No em funciona l'audio Asus M50

    ja ho he comprovat no se que estic fent mal segur que a la fi sera una tonteria ero la musica es reprodueix pero no es sent res de res o ingtente modificar en alsa i tot pero res nose que fer ja, al final segur que es una tonteria, pero mira que estic pegant-li voltes

  9. #9
    Join Date
    Feb 2009
    Location
    Rafelguaraf, PV
    Beans
    66
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: No em funciona l'audio Asus M50

    els drivers pareix que els tingues ben instal.lats, segons el que poses dalt...
    has provat també que no tingues cap opció de l'audio desactivada? allò que t'he dit del mezclador¿?
    a la consola, si escrius el comandament alsamixer, t'apareix un equalitzador on pots veure si els volums estan alts. es maneja amb les tecles de direcció.
    un altra cosa que he llegit per ahi es:
    edita l'arxiu /etc/modprobe.d/alsa-base
    i afegeix al final

    options snd-hda-intel model=3stack

    reinicia i veiam si hi ha sort...
    aprenent...

  10. #10
    Join Date
    May 2007
    Location
    Castalla (País Valencià)
    Beans
    599
    Distro
    Ubuntu Development Release

    Re: No em funciona l'audio Asus M50

    Salut!

    Bé, a Juanal el vaig convèncer jo (el conec de tota la vida), i he estat mirant-li a veure per que no li anava el so i li vaig dir que preguntara aquí, ja que durant tota la setmana ell està a un lloc i jo a altre (i jo tampoc en se molt de problemes de so! jajaja)

    Bé, ara pel amsn m'ha dit que va fer una instaŀlació amb el Wubi (Instaŀlant-ho des de Windows....)
    Crec que pot ser eixe el problema ????

    Ho dic per fer-li una instaŀlació des de zero ara que l'acaba d'instaŀlar. Però crec que el Wubi aquest dona problemes....

    Gràcies!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •