It's good news, thank you.
I will try them soon.
It's good news, thank you.
I will try them soon.
OS: Ubuntu 11.10 x86_64, kernel: 3.0.0-12-generic
Motherboard:GA-Z68A-D3-B3
Driver version: r8168-8.026.00
Before it, network worked but was terrifically unstable (from 5% up to 60% packet loss from time to time)
Solution works fine for me, Thanx a lot!
But it really strange that problem still exist after three years.
Last edited by IOException; November 17th, 2011 at 10:44 PM.
Check the mtu-value of your ISP and add it to the network-manager applet instead of "Automatic"
Cyberpower PC, Core i5 2500 3.3 gHz, 8GB DDR3, ATI 6770 1GB, Samsung BX 2440 LED 1080p, 1 TB SATA III, 2 TB SATA III, Siduction Linux 64-bit
When will kernell 3.1 be released for ubuntu? I doubt if it will be released for 11.10... so fixing is the only option for now...
I got this same problem in 11.10
---------------------------------------------------------------
john@GA-990FXA-UD5:~/Desktop/r8168-8.026.00$ sudo ./autorun.sh
[sudo] password for john:
Check old driver and unload it.
rmmod r8169
Build the module and install
Backup r8169.ko
rename r8169.ko to r8169.bak
load module r8168
FATAL: Module r8168 not found.
Updating initramfs. Please wait.
update-initramfs: Generating /boot/initrd.img-2.6.38-11-generic-pae
Completed.
john@GA-990FXA-UD5:~/Desktop/r8168-8.026.00$ lsmod | grep r816
john@GA-990FXA-UD5:~/Desktop/r8168-8.026.00$
-----------------------------------------
Any solutions?
many thanks
it always says:
FATAL: Module r8168 not found.
and now i dont have internet
please i need help
First, the current driver is r8168-8.026.00. 24 and 25 work, but 26 is probably the one you should use. With earlier versions, the Makefile needed a slight modification for kernels higher than 2.x. This latest version seems to have accounted for any kernel version.
1) sudo depmod -a
2) Add "blacklist r8169" to /etc/modprobe.d/blacklist.conf
3) Add "r8168" to /etc/initramfs-tools/modules
4) In the driver directory, run "sudo ./autorun.sh"
5) Run "sudo update-initramfs -v -u -k `uname -r`
Note that uname -r is enclosed in grave accent marks, not quotation marks.
Reboot. After you're back up, run "sudo lspci -v" to make sure that r8168 is the driver in use.
Tim
Cyberpower PC, Core i5 2500 3.3 gHz, 8GB DDR3, ATI 6770 1GB, Samsung BX 2440 LED 1080p, 1 TB SATA III, 2 TB SATA III, Siduction Linux 64-bit
Bookmarks