Results 1 to 1 of 1

Thread: e1000 and 82540EM slow upspeed

  1. #1
    Join Date
    Apr 2006
    Location
    Norway
    Beans
    153

    e1000 and 82540EM slow upspeed

    Hi,
    I have a 82540EM card using version 7.3.20-k3-NAPI of the e1000 driver and my kernel is 2.6.27-9-server.
    I am behind a 100Mbps switch. I used to have up and down speeds around 10MB/s, but now, my upload speed is no more then 400Kbps usually below 100. This has been the case for about 4 months now. But i still have the 10MB/s downloadrate. I have tested other computers behind the same switch, they still have the same up and down speed. I tried sending files from my computer to a nother computer behind the same switch, still no more then 400kbps. My computer has 2Gb of ram, and no real load what so ever.

    sudo lshw -C network, gives me
    ...
    *-network:1
    description: Ethernet interface
    product: 82540EM Gigabit Ethernet Controller
    vendor: Intel Corporation
    physical id: c
    bus info: pci@0000:01:0c.0
    logical name: eth1
    version: 02
    serial: 00:08:74:f5:xx:xx
    size: 100MB/s
    capacity: 1GB/s
    width: 32 bits
    clock: 66MHz
    capabilities: pm pcix msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.20-k3-NAPI duplex=full firmware=N/A ip=129.241.***.*** latency=64 link=yes mingnt=255 module=e1000 multicast=yes port=twisted pair speed=100MB/s


    Any help is appreciated.

    Anders
    Last edited by brujoand; December 7th, 2008 at 02:38 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •