Originally Posted by
praseodym
Check:
Code:
dmesg | grep rt2
lsmod
iwconfig
rfkill list
cat /etc/resolv.conf
Code:
dmesg | grep rt2
[ 14.246674] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2560, rf: 0003, rev: 0004
[ 246.935249] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 246.963621] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 246.972118] usbcore: registered new interface driver rt2800usb
[ 246.999297] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 247.008066] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
Code:
lsmod
Module Size Used by
rt2800usb 22485 0
rt2x00usb 20041 1 rt2800usb
rt2800lib 70115 1 rt2800usb
crc_ccitt 12627 1 rt2800lib
zram 18070 1
parport_pc 31981 0
ppdev 17391 0
bnep 18893 2
rfcomm 53664 0
bluetooth 323534 10 bnep,rfcomm
joydev 17097 0
snd_intel8x0 33069 1
snd_ac97_codec 105668 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
arc4 12536 4
snd_pcm 89488 2 snd_ac97_codec,snd_intel8x0
rt2500pci 22682 0
snd_page_alloc 14230 2 snd_intel8x0,snd_pcm
rt2x00pci 13111 1 rt2500pci
snd_seq_midi 13132 0
snd_seq_midi_event 14475 1 snd_seq_midi
rt2x00mmio 13395 1 rt2500pci
rt2x00lib 48854 6 rt2x00pci,rt2x00usb,rt2500pci,rt2800lib,rt2800usb,rt2x00mmio
pcmcia 51368 0
snd_rawmidi 25094 1 snd_seq_midi
radeon 1307301 2
mac80211 513247 4 rt2x00lib,rt2x00pci,rt2x00usb,rt2800lib
snd_seq 55383 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
psmouse 90642 0
serio_raw 13189 0
snd_timer 24447 2 snd_pcm,snd_seq
ttm 71886 1 radeon
drm_kms_helper 46867 1 radeon
cfg80211 401436 2 mac80211,rt2x00lib
snd 60790 10 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_device,snd_seq_midi
i2c_ali15x3 13139 0
yenta_socket 40193 0
k8temp 12842 0
i2c_ali1535 13102 0
soundcore 12600 1 snd
pcmcia_rsrc 18319 1 yenta_socket
drm 242354 4 ttm,drm_kms_helper,radeon
ohci_pci 13305 0
i2c_algo_bit 13197 1 radeon
pcmcia_core 22328 3 pcmcia,pcmcia_rsrc,yenta_socket
eeprom_93cx6 13168 1 rt2500pci
shpchp 32129 0
ati_agp 13177 0
mac_hid 13037 0
lp 13299 0
parport 40795 3 lp,ppdev,parport_pc
pata_acpi 12886 0
firewire_ohci 35257 0
pata_ali 13562 3
uli526x 22164 0
firewire_core 57656 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
Code:
iwconfig
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
lo no wireless extensions.
eth0 no wireless extensions.
wlan1 IEEE 802.11bgn ESSID:"ABC"
Mode:Managed Frequency:2.442 GHz Access Point: C8:D3:A3:48:99:70
Bit Rate=81 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=55/70 Signal level=-55 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:12 Invalid misc:5 Missed beacon:0
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: phy2: Wireless LAN
Soft blocked: no
Hard blocked: no
Code:
cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.1.1
search Dlink
NOTE:
Pleaste note that this laptop is not mine. It is for a friend I converted her to Linux. I am currently using MY OWN USB Wireless Adapter which I can not give it with the laptop, therefore, I need to fix this issue. That should explain where this come from:
Thanks!
Bookmarks