problem realtek 8723 driver

[chili555]

Indeed it is. What about this?

wlan0 IEEE 802.11bgn ESSID:"TGM1x"
Mode:Managed Frequency:2.432 GHz Access Point: 00:1F:45:4B:5E:A8
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=22/70 Signal level=-88 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:23 Missed beacon:0

How far from the router are you? No wonder it drops!

[gdisastery]

I don't know where the router of our school is. But if I work with Windows the connection is more stable.

[gdisastery]

Indeed it is. What about this?How far from the router are you? No wonder it drops!

At home it is dropping too.. I really have no clue..

wlan0     IEEE 802.11bgn  ESSID:"applesweet86"            Mode:Managed  Frequency:2.427 GHz  Access Point: 00:24:01:38:F4:B7   
          Bit Rate=72.2 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70  Signal level=26 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:9   Missed beacon:0

[eyeneedhelp]

i try to read all posts that relate to my problem. im new here and to ubuntu but not new to computing. started in the 80;s with a heath 3400 trainer using hex keypad!!

do you guys realize how complex your above posts are to me,a newcomer.
im struggling with a usb install and based on the above info this is nto a place for beginneres,or even a seasond operator!
i'd need a degree in sw engineering to follow you!!

so i ask the same ongoing question,"how do i install a new usb device in a fresh new ubuntu computer??

[chili555]

i try to read all posts that relate to my problem. im new here and to ubuntu but not new to computing. started in the 80;s with a heath 3400 trainer using hex keypad!!

do you guys realize how complex your above posts are to me,a newcomer.
im struggling with a usb install and based on the above info this is nto a place for beginneres,or even a seasond operator!
i'd need a degree in sw engineering to follow you!!

so i ask the same ongoing question,"how do i install a new usb device in a fresh new ubuntu computer??

I suggest you continue your ongoing thread with Hadaka.

[eyeneedhelp]

last sat i connected on internet on first try with new usb,no software.
after a week of reinstalls,mods,reboots,new downloads,i get no wireless activation at all,no connection to thiswifi im using
10 feet away,cant open a game,reboot with cd,reinstall.
i started out connected and went downhill and im certain its not his fault.
im using a solid state drive,?maybe thats it,my last guess!!

[chili555]

I suggest you continue your ongoing thread with Hadaka.

[menonrudhin]

Glad it's working and I'm glad to know how to get this new device working. Have fun!

rudhin@rudhin-Satellite-C850:~$ cd rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012/
rudhin@rudhin-Satellite-C850:~/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012$ clear


rudhin@rudhin-Satellite-C850:~/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012$ sudo su
[sudo] password for rudhin:
root@rudhin-Satellite-C850:/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012# make
make -C /lib/modules/3.5.0-23-generic/build M=/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012 modules
make[1]: Entering directory `/usr/src/linux-headers-3.5.0-23-generic'
CC [M] /home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012/base.o
/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012/base.c: In function ‘_rtl_init_mac80211’:
/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012/base.c:320:6: error: ‘IEEE80211_HW_BEACON_FILTER’ undeclared (first use in this function)
/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012/base.c:320:6: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012/base.o] Error 1
make[1]: *** [_module_/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-23-generic'
make: *** [all] Error 2
root@rudhin-Satellite-C850:/home/rudhin/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514 .2012#

I'm still having above error, please help.

[chili555]

Please see posts 17 and following here: http://ubuntuforums.org/showthread.p...highlight=8723

[c.pfarher]

Hello Chilli, I have a problem similar to others users in posts.... The wireless work fine when power on the PC the first one start, but when restarted it wasn´t work...
This are the output of the commands you post in differents posts of this thread: http://pastebin.com/yDpERxQR
I try to add the rfkill block 1 or unblock 1 in /etc/rc6.d ... the first time of reboot with rfkill block 1, wireless work, but after that, it isn´t working anymore... any idea how to solve this problem?
my kernel is 3.5.0-26-generic in ubuntu 12.10 64 bits and the file compiled is rtl_92ce_92se_92de_8723ae_linux_mac80211_0007.0809 .2012.tar.gz => this file also have the drivers for bluetooth?
thank you!...