If you had intended to attach a file, some data or a link, nothing came through. You may want to repost that
If you had intended to attach a file, some data or a link, nothing came through. You may want to repost that
http://ubuntuforums.org/showthread.php?t=2103715
in this link I solved the main problem but that wireless problem appeared to me so I've asked about it and in that link some of my terminal codes about that problem
Hope you can see it now
Hi, it looks like you have this..
Network controller: Broadcom Corporation Device 4365 (rev 01)
to verify please do
*IF ..it is 14e4-4365 thenCode:lspci -nnk | grep0280
http://askubuntu.com/questions/21589.../215923#215923
Craving anchovy, herring and squid pizza.....with clam sauce
I am not sure if I can use this same thread also myself but I try. My problem seems to be similar with others. Can I use the same pieces of advise as for the others given here? My computer is in this respect infamous HP6735s I resently installed Xubuntu 12.04 and cannot find wireless net. No even my own one. I have not used any Linux in this computer before. After reading lots of stuff here I enclose copy of some command results here hoping somebody could advise me what to do: -HP:~$ sudo lshw -class network [sudo] password for pena: *-network description: Ethernet interface product: 88E8042 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:29:a0:56:b6 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:d3100000-d3103fff ioport:3000(size=256) *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:21:00:3a:82:d3 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-36-generic-pae firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg pena@pena-HP:~$ nm-tool NetworkManager Tool State: disconnected - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: b43 State: unavailable Default: no HW Address: 00:21:00:3A:823 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sky2 State: unavailable Default: no HW Address: 00:1F:29:A0:56:B6 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off
Hi, maybe I can be of help but please use the CODE box to give output (the # button in editor) otherwise it is a mess
Sorry, I was wondering myself too what wnt wrong in my previous post.
Hope this comes OK.
Code:HP:~$ sudo lshw -class network [sudo] password for pena: *-network description: Ethernet interface product: 88E8042 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:29:a0:56:b6 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:d3100000-d3103fff ioport:3000(size=256) *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:21:00:3a:82:d3 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-36-generic-pae firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg pena@pena-HP:~$ nm-tool NetworkManager Tool State: disconnected - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: b43 State: unavailable Default: no HW Address: 00:21:00:3A:82:D3 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sky2 State: unavailable Default: no HW Address: 00:1F:29:A0:56:B6 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off
Hi again, ok can you please for start also give the output of
Code:lspci | NetworkCode:rfkill list wifiCode:lsmodAlso, has xubuntu proposed any drivers for you to install regarding the wireless, and if so have you done this? Any other action you have taken so far regarding drivers?Code:ls /etc/modprob.d/
Code:lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8042 PCI-E Fast Ethernet Controller (rev 10) pena@pena-HP:~$ pena@pena-HP:~$ Network Network: command not found pena@pena-HP:~$ Network Network: command not found pena@pena-HP:~$ rfkill list wifi 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes pena@pena-HP:~$ lsmod Module Size Used by binfmt_misc 17292 1 nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 btusb 17948 0 vesafb 13516 1 bnep 17830 2 rfcomm 38139 4 bluetooth 158479 11 btusb,bnep,rfcomm parport_pc 32114 0 ppdev 12849 0 snd_hda_codec_analog 75395 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi snd_usb_audio 101566 3 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_analog,snd_hda_intel snd_pcm 80916 3 snd_usb_audio,snd_hda_intel,snd_hda_codec snd_hwdep 13276 2 snd_usb_audio,snd_hda_codec snd_usbmidi_lib 24603 1 snd_usb_audio snd_seq_midi 13132 0 snd_rawmidi 25424 2 snd_usbmidi_lib,snd_seq_midi pl2303 17673 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event usbserial 37173 1 pl2303 uvcvideo 67203 0 snd_timer 28931 2 snd_pcm,snd_seq videodev 86588 1 uvcvideo snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 86520 0 serio_raw 13027 0 snd 62218 23 snd_hda_codec_analog,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device fglrx 2909978 39 k10temp 12990 0 sp5100_tco 13495 0 i2c_piix4 13093 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm soundcore 14635 1 snd video 19068 0 hp_accel 25728 0 lis3lv02d 19268 1 hp_accel input_polldev 13648 1 lis3lv02d wmi 18744 1 hp_wmi mac_hid 13077 0 shpchp 32325 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41937 0 hid 77428 1 usbhid sky2 53628 0 pena@pena-HP:~$ ls /etc/modprob.d/ ls: cannot access /etc/modprob.d/: No such file or directory
About the drivers. There was a suggestion of restricted drivers but were not downloadable. The D/L discontinued in about halfway.
Bookmarks