More information...
(I appologise for not having included this the first time)
uname -a
Code:
Linux shannon 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
cat /proc/version_signature
Code:
Ubuntu 3.11.0-15.25-generic 3.11.10
dmesg
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-15-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 (Ubuntu 3.11.0-15.25-generic 3.11.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=7461fabb-0536-47e2-a52d-a92ac7c5895d ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: USTek Computer INC. P5L-MX/P5L-MX, BIOS 1103 12/12/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ff8ffff]
[ 0.000000] [mem 0x7fe00000-0x7ff8ffff] page 4k
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35db4000-0x36ed1fff]
[ 0.000000] ACPI: RSDP 00000000000fafb0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 00038 (v01 ATComp TestAsus 12000712 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00081 (v01 ATComp TestAsus 12000712 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff90590 063B6 (v01 ATComp TestAsus 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 00080 (v01 ATComp TestAsus 12000712 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 00066 (v01 ATComp TestAsus 12000712 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff96950 00038 (v01 ATComp OEMHPET 12000712 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff96990 0003C (v01 ATComp TestAsus 12000712 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff8ffff]
[ 0.000000] NODE_DATA [mem 0x7ff8b000-0x7ff8ffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ff8ffff]
[ 0.000000] On node 0 totalpages: 524078
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 520080 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xffb7ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86720 r8192 d23872 u524288
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=7461fabb-0536-47e2-a52d-a92ac7c5895d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2028976K/2096312K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 67336K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2800.079 MHz processor
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.15 BogoMIPS (lpj=11200316)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004057] Security Framework initialized
[ 0.004091] AppArmor: AppArmor initialized
[ 0.004094] Yama: becoming mindful.
[ 0.004462] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008108] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008655] Mount-cache hash table entries: 256
[ 0.009027] Initializing cgroup subsys memory
[ 0.009051] Initializing cgroup subsys devices
[ 0.009054] Initializing cgroup subsys freezer
[ 0.009057] Initializing cgroup subsys blkio
[ 0.009060] Initializing cgroup subsys perf_event
[ 0.009065] Initializing cgroup subsys hugetlb
[ 0.009107] CPU: Physical Processor ID: 0
[ 0.009111] CPU: Processor Core ID: 0
[ 0.009114] mce: CPU supports 4 MCE banks
[ 0.009130] CPU0: Thermal monitoring enabled (TM1)
[ 0.009142] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.009142] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[ 0.009142] tlb_flushall_shift: 6
[ 0.009248] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[ 0.012340] ACPI: Core revision 20130517
[ 0.016730] ACPI: All ACPI Tables successfully acquired
[ 0.020019] ftrace: allocating 27844 entries in 109 pages
[ 0.032538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078673] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (fam: 0f, model: 04, stepping: 07)
[ 0.080000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 18
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 0000007fffffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 000000000003ffff
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] smpboot: Booting Node 0, Processors #1
[ 0.091996] Brought up 2 CPUs
[ 0.092000] smpboot: Total of 2 processors activated (11200.31 BogoMIPS)
[ 0.093130] devtmpfs: initialized
[ 0.093653] EVM: security.selinux
[ 0.093656] EVM: security.SMACK64
[ 0.093658] EVM: security.capability
[ 0.093704] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffdffff] (270336 bytes)
[ 0.096662] regulator-dummy: no parameters
[ 0.096703] RTC time: 18:23:52, date: 02/12/14
[ 0.096776] NET: Registered protocol family 16
[ 0.097032] ACPI: bus type PCI registered
[ 0.097037] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.097131] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.097136] PCI: not using MMCONFIG
[ 0.097139] PCI: Using configuration type 1 for base access
[ 0.097310] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.097313] mtrr: probably your BIOS does not setup all CPUs.
[ 0.097315] mtrr: corrected configuration.
[ 0.098748] bio: create slab <bio-0> at 0
[ 0.098748] ACPI: Added _OSI(Module Device)
[ 0.098748] ACPI: Added _OSI(Processor Device)
[ 0.098748] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.098748] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100839] ACPI: EC: Look up EC in DSDT
[ 0.102878] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.106820] ACPI: Interpreter enabled
[ 0.106839] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.106863] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.106867] ACPI: Using IOAPIC for interrupt routing
[ 0.106907] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.109448] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.115366] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.115512] ACPI: No dock devices found.
[ 0.126068] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.126081] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.126086] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.126223] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.126229] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.126233] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.126237] acpi PNP0A08:00: host bridge window [mem 0x80010000-0xffffffff] (ignored)
[ 0.126240] PCI: root bus 00: using default resources
[ 0.126245] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.126428] PCI host bridge to bus 0000:00
[ 0.126434] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.126438] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.126445] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.126460] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.126612] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.126675] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.126751] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.126845] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.126866] pci 0000:00:1b.0: reg 0x10: [mem 0xdddf8000-0xdddfbfff 64bit]
[ 0.126950] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.127075] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.127162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.127239] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.127305] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.127354] pci 0000:00:1d.0: reg 0x20: [io 0x9000-0x901f]
[ 0.127449] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.127507] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.127556] pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f]
[ 0.127646] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.127703] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.127752] pci 0000:00:1d.2: reg 0x20: [io 0x9800-0x981f]
[ 0.127842] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.127898] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.127947] pci 0000:00:1d.3: reg 0x20: [io 0xa000-0xa01f]
[ 0.128046] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.128113] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.128138] pci 0000:00:1d.7: reg 0x10: [mem 0xdddffc00-0xdddfffff]
[ 0.128236] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.128309] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.128368] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.128492] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.128553] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.128648] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.128657] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.128664] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.128804] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.128822] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.128835] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.128846] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.128858] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.128870] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.129008] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.129027] pci 0000:00:1f.2: reg 0x10: [io 0xb800-0xb807]
[ 0.129037] pci 0000:00:1f.2: reg 0x14: [io 0xb400-0xb403]
[ 0.129048] pci 0000:00:1f.2: reg 0x18: [io 0xb000-0xb007]
[ 0.129058] pci 0000:00:1f.2: reg 0x1c: [io 0xa800-0xa803]
[ 0.129068] pci 0000:00:1f.2: reg 0x20: [io 0xa400-0xa40f]
[ 0.129113] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.129228] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.129288] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.129493] pci 0000:03:00.0: [10de:01df] type 00 class 0x030000
[ 0.129509] pci 0000:03:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
[ 0.129524] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.129538] pci 0000:03:00.0: reg 0x1c: [mem 0xde000000-0xdeffffff 64bit]
[ 0.129554] pci 0000:03:00.0: reg 0x30: [mem 0xddfe0000-0xddffffff pref]
[ 0.129643] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.129655] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.129660] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.129666] pci 0000:00:01.0: bridge window [mem 0xddf00000-0xdfffffff]
[ 0.129672] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.129746] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.129753] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.129827] pci 0000:01:01.0: [1106:3106] type 00 class 0x020000
[ 0.129850] pci 0000:01:01.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.129863] pci 0000:01:01.0: reg 0x14: [mem 0xddeffc00-0xddeffcff]
[ 0.129914] pci 0000:01:01.0: reg 0x30: [mem 0xddee0000-0xddeeffff pref]
[ 0.129949] pci 0000:01:01.0: supports D1 D2
[ 0.129953] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130053] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.130059] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.130065] pci 0000:00:1e.0: bridge window [mem 0xdde00000-0xddefffff]
[ 0.130073] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.130077] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.131335] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.131452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.131567] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.131680] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.131792] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.131905] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.132024] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.132139] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.132331] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.132393] Found 1 acpi root devices
[ 0.132545] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132545] vgaarb: loaded
[ 0.132545] vgaarb: bridge control possible 0000:03:00.0
[ 0.132545] SCSI subsystem initialized
[ 0.132545] ACPI: bus type ATA registered
[ 0.132545] libata version 3.00 loaded.
[ 0.132545] ACPI: bus type USB registered
[ 0.132545] usbcore: registered new interface driver usbfs
[ 0.132545] usbcore: registered new interface driver hub
[ 0.132545] usbcore: registered new device driver usb
[ 0.132545] PCI: Using ACPI for IRQ routing
[ 0.133801] PCI: pci_cache_line_size set to 64 bytes
[ 0.133858] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.133862] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.134018] NetLabel: Initializing
[ 0.134022] NetLabel: domain hash size = 128
[ 0.134024] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.134043] NetLabel: unlabeled traffic allowed by default
[ 0.134064] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.134064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.134064] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.137039] Switched to clocksource hpet
[ 0.147112] AppArmor: AppArmor Filesystem Enabled
[ 0.147160] pnp: PnP ACPI init
[ 0.147188] ACPI: bus type PNP registered
[ 0.147294] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.147301] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.147348] pnp 00:01: [dma 4]
[ 0.147383] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.147445] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.147492] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.147541] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.148030] pnp 00:05: [dma 2]
[ 0.148113] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.148636] pnp 00:06: [dma 3]
[ 0.148827] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.148926] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.148933] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149201] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.149207] system 00:08: [io 0x0800-0x087f] could not be reserved
[ 0.149212] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.149216] system 00:08: [io 0x0900-0x091f] has been reserved
[ 0.149220] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.149225] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.149229] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.149233] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.149238] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149430] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.149555] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.149676] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.149797] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.149802] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.149807] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150167] pnp 00:0d: [dma 0 disabled]
[ 0.150268] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.150388] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.150504] system 00:0f: [mem 0xffc00000-0xfff7ffff] could not be reserved
[ 0.150510] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150617] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.150623] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150911] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.150917] system 00:11: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.150922] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.150926] system 00:11: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.150931] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.151173] pnp: PnP ACPI: found 18 devices
[ 0.151176] ACPI: bus type PNP unregistered
[ 0.159470] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.159476] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.159492] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.159498] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.159502] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.159509] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.159514] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.159520] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.159525] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.159531] pci 0000:00:01.0: bridge window [mem 0xddf00000-0xdfffffff]
[ 0.159536] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.159542] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.159547] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.159553] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.159559] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.159567] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.159572] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.159579] pci 0000:00:1e.0: bridge window [mem 0xdde00000-0xddefffff]
[ 0.159807] pci 0000:00:1e.0: setting latency timer to 64
[ 0.159815] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.159819] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.159823] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.159827] pci_bus 0000:03: resource 1 [mem 0xddf00000-0xdfffffff]
[ 0.159831] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.159835] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.159839] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[ 0.159843] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.159847] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.159851] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xddefffff]
[ 0.159854] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.159858] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.159915] NET: Registered protocol family 2
[ 0.160182] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.160310] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.160397] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.160455] TCP: reno registered
[ 0.160465] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.160488] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.160603] NET: Registered protocol family 1
[ 0.161662] pci 0000:03:00.0: Boot video device
[ 0.161671] PCI: CLS 16 bytes, default 64
[ 0.161784] Trying to unpack rootfs image as initramfs...
[ 0.656574] Freeing initrd memory: 17528K (ffff880035db4000 - ffff880036ed2000)
[ 0.656794] Scanning for low memory corruption every 60 seconds
[ 0.657181] Initialise module verification
[ 0.657252] audit: initializing netlink socket (disabled)
[ 0.657280] type=2000 audit(1392229432.656:1): initialized
[ 0.695712] bounce pool size: 64 pages
[ 0.695733] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.697846] zbud: loaded
[ 0.698052] VFS: Disk quotas dquot_6.5.2
[ 0.698134] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.699002] fuse init (API version 7.22)
[ 0.699129] msgmni has been set to 3997
[ 0.699773] Key type asymmetric registered
[ 0.699778] Asymmetric key parser 'x509' registered
[ 0.699838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.699887] io scheduler noop registered
[ 0.699891] io scheduler deadline registered (default)
[ 0.699939] io scheduler cfq registered
[ 0.700127] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.700219] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.700326] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.700352] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.700569] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.700577] ACPI: Power Button [PWRB]
[ 0.700647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.700652] ACPI: Power Button [PWRF]
[ 0.700904] GHES: HEST is not enabled!
[ 0.701020] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.721492] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.723441] Linux agpgart interface v0.103
[ 0.725667] brd: module loaded
[ 0.726746] loop: module loaded
[ 0.726936] ata_piix 0000:00:1f.1: version 2.13
[ 0.727131] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.727545] scsi0 : ata_piix
[ 0.728260] scsi1 : ata_piix
[ 0.728873] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.728878] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.729002] ata_piix 0000:00:1f.2: MAP [
[ 0.729006] P0 P2 P1 P3 ]
[ 0.729054] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.729531] scsi2 : ata_piix
[ 0.730292] scsi3 : ata_piix
[ 0.731012] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 23
[ 0.731016] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 23
[ 0.731466] libphy: Fixed MDIO Bus: probed
[ 0.731618] tun: Universal TUN/TAP device driver, 1.6
[ 0.731621] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.731708] PPP generic driver version 2.4.2
[ 0.731783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.731787] ehci-pci: EHCI PCI platform driver
[ 0.731924] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.731939] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.731950] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.731968] ehci-pci 0000:00:1d.7: debug port 1
[ 0.735866] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
[ 0.735898] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdddffc00
[ 0.744028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.744063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.744067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.744071] usb usb1: Product: EHCI Host Controller
[ 0.744074] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[ 0.744077] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.744232] hub 1-0:1.0: USB hub found
[ 0.744240] hub 1-0:1.0: 8 ports detected
[ 0.744475] ehci-platform: EHCI generic platform driver
[ 0.744489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.744492] ohci-pci: OHCI PCI platform driver
[ 0.744508] ohci-platform: OHCI generic platform driver
[ 0.744519] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.744647] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.744653] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.744661] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.744716] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[ 0.744766] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.744770] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.744774] usb usb2: Product: UHCI Host Controller
[ 0.744777] usb usb2: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[ 0.744780] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.744925] hub 2-0:1.0: USB hub found
[ 0.744935] hub 2-0:1.0: 2 ports detected
[ 0.745168] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.745174] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.745182] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.745225] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[ 0.745273] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.745278] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745281] usb usb3: Product: UHCI Host Controller
[ 0.745284] usb usb3: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[ 0.745287] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.745411] hub 3-0:1.0: USB hub found
[ 0.745418] hub 3-0:1.0: 2 ports detected
[ 0.745619] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.745625] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.745633] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.745676] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[ 0.745722] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.745726] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745729] usb usb4: Product: UHCI Host Controller
[ 0.745732] usb usb4: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[ 0.745735] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.745857] hub 4-0:1.0: USB hub found
[ 0.745864] hub 4-0:1.0: 2 ports detected
[ 0.746098] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.746104] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.746112] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.746151] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[ 0.746201] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.746205] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.746209] usb usb5: Product: UHCI Host Controller
[ 0.746212] usb usb5: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[ 0.746215] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.746342] hub 5-0:1.0: USB hub found
[ 0.746348] hub 5-0:1.0: 2 ports detected
[ 0.746587] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.749288] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.749299] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.749512] mousedev: PS/2 mouse device common for all mice
[ 0.749725] rtc_cmos 00:02: RTC can wake from S4
[ 0.749883] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.749914] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.750038] device-mapper: uevent: version 1.0.3
[ 0.750146] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 0.750155] cpuidle: using governor ladder
[ 0.750158] cpuidle: using governor menu
[ 0.750179] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.750308] TCP: cubic registered
[ 0.750509] NET: Registered protocol family 10
[ 0.750829] NET: Registered protocol family 17
[ 0.750847] Key type dns_resolver registered
[ 0.751196] PM: Hibernation image not present or could not be loaded.
[ 0.751202] Loading module verification certificates
[ 0.752864] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 233c65a83836c14ba34eda83a0b805044bc3b448'
[ 0.752885] registered taskstats version 1
[ 0.756955] Key type trusted registered
[ 0.760489] Key type encrypted registered
[ 0.763982] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.764324] Magic number: 2:608:392
[ 0.764450] rtc_cmos 00:02: setting system clock to 2014-02-12 18:23:53 UTC (1392229433)
[ 0.764556] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.764559] EDD information not available.
[ 0.773421] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.907354] ata3.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
[ 0.907360] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.912317] ata4.01: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN01, max UDMA/100
[ 0.912457] ata3.00: configured for UDMA/133
[ 0.912612] scsi 2:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 0.912865] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 0.912954] sd 2:0:0:0: [sda] Write Protect is off
[ 0.912959] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.912998] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.913116] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.928170] ata4.01: configured for UDMA/100
[ 0.935787] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 0.936435] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.940062] scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN01 PQ: 0 ANSI: 5
[ 0.953731] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.953736] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.953887] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 0.954035] sr 3:0:1:0: Attached scsi generic sg1 type 5
[ 0.955992] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 0.955996] Write protecting the kernel read-only data: 12288k
[ 0.960431] Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
[ 0.963429] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[ 0.986615] systemd-udevd[110]: starting version 204
[ 1.022374] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.029008] via-rhine 0000:01:01.0 eth0: VIA Rhine III at 0xddeffc00, 00:19:5b:82:9f:82, IRQ 21
[ 1.029798] via-rhine 0000:01:01.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[ 1.034794] md: linear personality registered for level -1
[ 1.039831] md: multipath personality registered for level -4
[ 1.044709] md: raid0 personality registered for level 0
[ 1.047569] Floppy drive(s): fd0 is 1.44M
[ 1.050226] md: raid1 personality registered for level 1
[ 1.056070] usb 1-8: new high-speed USB device number 2 using ehci-pci
[ 1.067879] FDC 0 is a post-1991 82077
[ 1.124021] raid6: sse2x1 2000 MB/s
[ 1.192013] raid6: sse2x2 3039 MB/s
[ 1.260025] raid6: sse2x4 2908 MB/s
[ 1.260029] raid6: using algorithm sse2x2 (3039 MB/s)
[ 1.260031] raid6: using intx1 recovery algorithm
[ 1.262147] xor: measuring software checksum speed
[ 1.300013] prefetch64-sse: 3848.000 MB/sec
[ 1.313340] usb 1-8: New USB device found, idVendor=0bc2, idProduct=50a5
[ 1.313348] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.313352] usb 1-8: Product: GoFlex Desk
[ 1.313355] usb 1-8: Manufacturer: Seagate
[ 1.313358] usb 1-8: SerialNumber: NA0L8P5Q
[ 1.319283] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 1.322430] scsi4 : usb-storage 1-8:1.0
[ 1.322637] usbcore: registered new interface driver usb-storage
[ 1.340012] generic_sse: 3785.000 MB/sec
[ 1.340016] xor: using function: prefetch64-sse (3848.000 MB/sec)
[ 1.341938] async_tx: api initialized (async)
[ 1.353409] md: raid6 personality registered for level 6
[ 1.353414] md: raid5 personality registered for level 5
[ 1.353417] md: raid4 personality registered for level 4
[ 1.365341] md: raid10 personality registered for level 10
[ 1.395057] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 1.395063] EXT4-fs (sda5): write access will be enabled during recovery
[ 1.656035] tsc: Refined TSC clocksource calibration: 2799.909 MHz
[ 1.730297] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 1.733822] EXT4-fs (sda5): 3 orphan inodes deleted
[ 1.733826] EXT4-fs (sda5): recovery complete
[ 1.805061] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.320907] scsi 4:0:0:0: Direct-Access Seagate GoFlex Desk 0D16 PQ: 0 ANSI: 5
[ 2.321288] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.321772] sd 4:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[ 2.322882] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.322888] sd 4:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 2.324532] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.327762] sd 4:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[ 2.330543] sdb: sdb1
[ 2.331639] sd 4:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[ 2.333634] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.656107] Switched to clocksource tsc
[ 9.328485] Adding 3998716k swap on /dev/sda1. Priority:-1 extents:1 across:3998716k FS
[ 9.652984] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 10.042112] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 10.413402] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.520509] systemd-udevd[363]: starting version 204
[ 10.630226] lp: driver loaded but no devices found
[ 10.695702] parport_pc 00:06: reported by Plug and Play ACPI
[ 10.695834] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 10.776436] lp0: using parport0 (interrupt-driven).
[ 10.795655] Bluetooth: Core ver 2.16
[ 10.795691] NET: Registered protocol family 31
[ 10.795695] Bluetooth: HCI device and connection manager initialized
[ 10.795709] Bluetooth: HCI socket layer initialized
[ 10.795713] Bluetooth: L2CAP socket layer initialized
[ 10.795724] Bluetooth: SCO socket layer initialized
[ 10.814709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.814716] Bluetooth: BNEP filters: protocol multicast
[ 10.814730] Bluetooth: BNEP socket layer initialized
[ 10.839053] intel_rng: FWH not detected
[ 10.864063] Bluetooth: RFCOMM TTY layer initialized
[ 10.864087] Bluetooth: RFCOMM socket layer initialized
[ 10.864091] Bluetooth: RFCOMM ver 1.11
[ 10.876460] leds_ss4200: no LED devices found
[ 11.023259] nvidia: module license 'NVIDIA' taints kernel.
[ 11.023268] Disabling lock debugging due to kernel taint
[ 11.080980] type=1400 audit(1392229443.811:2): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/sbin/dhclient" pid=459 comm="apparmor_parser"
[ 11.080996] type=1400 audit(1392229443.811:3): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
[ 11.081005] type=1400 audit(1392229443.811:4): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 11.081689] type=1400 audit(1392229443.811:5): apparmor="STATUS" operation="profile_replace" parent=457 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
[ 11.081703] type=1400 audit(1392229443.811:6): apparmor="STATUS" operation="profile_replace" parent=457 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 11.082034] type=1400 audit(1392229443.811:7): apparmor="STATUS" operation="profile_replace" parent=457 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
[ 11.093613] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 11.107458] type=1400 audit(1392229443.835:8): apparmor="STATUS" operation="profile_load" parent=457 profile="unconfined" name="/usr/sbin/ntpd" pid=463 comm="apparmor_parser"
[ 11.151322] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 11.153915] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.108 Wed Jul 31 19:35:17 PDT 2013
[ 11.182318] ppdev: user-space parallel port driver
[ 11.288608] init: avahi-cups-reload main process (465) terminated with status 1
[ 11.293320] microcode: CPU0 sig=0xf47, pf=0x10, revision=0x3
[ 11.334713] type=1400 audit(1392229444.063:9): apparmor="STATUS" operation="profile_load" parent=476 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=497 comm="apparmor_parser"
[ 11.334729] type=1400 audit(1392229444.063:10): apparmor="STATUS" operation="profile_load" parent=476 profile="unconfined" name="/usr/sbin/cupsd" pid=497 comm="apparmor_parser"
[ 11.335453] type=1400 audit(1392229444.063:11): apparmor="STATUS" operation="profile_replace" parent=476 profile="unconfined" name="/usr/sbin/cupsd" pid=497 comm="apparmor_parser"
[ 11.813294] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 11.827238] init: failsafe main process (534) killed by TERM signal
[ 11.916979] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 11.950911] microcode: CPU1 sig=0xf47, pf=0x10, revision=0x3
[ 11.959061] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 12.278753] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 12.433011] init: udev-fallback-graphics main process (715) terminated with status 1
sudo lspci -vvnn
Code:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard [1043:817a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=09 <?>
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ddf00000-dfffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 75.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard (Realtek ALC 882 codec) [1043:817f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at dddf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41e1
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8179]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 9000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 9400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at a000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at dddffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dde00000-ddefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:8179]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
01:01.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] [1106:3106] (rev 86)
Subsystem: D-Link System Inc DFE-538TX [1186:1407]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at ddeffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ddee0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
03:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:2200]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ddfe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Kernel driver in use: nvidia
Adv Reply
Originally Posted by pqwoerituytrueiwoq
Bookmarks