OpenGL trouble - could not load OpenGL subsystem

**TheBigH** · March 10th, 2012

Hi everyone,
recently I've been unable to run any games that require OpenGL. For instance I used to be able to play OpenArena but now it crashes with the following error message

Code:

GLimp_Init() - could not load OpenGL subsystem.
 See /home/thebigh/.openarena/baseoa/crashlog.txt for details.

I've uninstalled and reinstalled my Nvidia drivers, but this has not fixed the problem.

Another thread I found on this forum suggested I try "sudo apt-get install mesa-utils", but that did not work for me either.

Here is a complete description of my system, the contents of the crashlog.txt from OpenArena, and the results of "glxinfo | grep OpenGL" which was suggested by someone in another thread. I hope someone will be able to figure out what the trouble is and how to fix it. Thanks.

Code:

System information report, generated by Sysinfo: 10/03/2012 6:05:59 PM
http://sourceforge.net/projects/gsysinfo

SYSTEM INFORMATION
    Running Ubuntu Linux, the Ubuntu 11.04 (natty) release.
    GNOME: 2.32.1 (Ubuntu 2011-04-14)
    Kernel version: 2.6.38-13-generic (#56-Ubuntu SMP Tue Feb 14 12:40:40 UTC 2012)
    GCC: 4.5.2 (i686-linux-gnu)
    Xorg: 1.10.1 (13 October 2011  05:38:22PM) (13 October 2011  05:38:22PM)
    Hostname: thebigh
    Uptime: 0 days 9 h 35 min

CPU INFORMATION
    GenuineIntel, Intel(R) Pentium(R) CPU        P6100  @ 2.00GHz
    Number of CPUs: 2
    CPU clock currently at 1999.000 MHz with 3072 KB cache
    Numbering: family(6) model(37) stepping(5)
    Bogomips: 3990.05
    Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm popcnt lahf_lm arat dts

MEMORY INFORMATION
    Total memory: 1866 MB
    Total swap: 1897 MB

STORAGE INFORMATION
    SCSI device -  scsi0
        Vendor:  ATA      
        Model:  ST9500325AS      
    SCSI device -  scsi1
        Vendor:  Slimtype 
        Model:  DVD A  DS8A5SH   

HARDWARE INFORMATION
MOTHERBOARD
    Host bridge
        Intel Corporation Core Processor Reserved (rev 05)
        Subsystem: Intel Corporation Device 8086
    PCI bridge(s)
        Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
        Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
        Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) (prog-if 00 [Normal decode])
        Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) (prog-if 00 [Normal decode])
        Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode])
    USB controller(s)
        Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
        Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
    ISA bridge
        Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
        Subsystem: ASUSTeK Computer Inc. Device 1f27

GRAPHIC CARD
    VGA controller
        Intel Corporation Core Processor Integrated Graphics Controller (rev 18) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device 1be2

SOUND CARD
    Multimedia controller
        Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
        Subsystem: ASUSTeK Computer Inc. Device 13f3

NETWORK
    Network controller
        Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: AzureWave Device 1089
    Ethernet controller
        JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device 1905

Code:

ioq3 1.36+svn1933-1/Ubuntu linux-i386 Apr  4 2011
----- FS_Startup -----
Current search path:
/home/thebigh/.openarena/baseoa
/usr/lib/games/openarena/baseoa/pak6-patch085.pk3 (559 files)
/usr/lib/games/openarena/baseoa/pak6-misc.pk3 (229 files)
/usr/lib/games/openarena/baseoa/pak5-TA.pk3 (139 files)
/usr/lib/games/openarena/baseoa/pak4-textures.pk3 (1753 files)
/usr/lib/games/openarena/baseoa/pak2-players.pk3 (669 files)
/usr/lib/games/openarena/baseoa/pak2-players-mature.pk3 (231 files)
/usr/lib/games/openarena/baseoa/pak1-maps.pk3 (100 files)
/usr/lib/games/openarena/baseoa/pak0.pk3 (1042 files)
/usr/lib/games/openarena/baseoa

----------------------
4722 files in pk3 files
execing default.cfg
execing q3config.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
----- Client Initialization -----
Couldn't read q3history.
----- Initializing Renderer ----
-------------------------------
QKEY found.
----- Client Initialization Complete -----
----- R_Init -----
SDL using driver "x11"
Initializing OpenGL display
Estimated display aspect: 1.779
...setting mode 3: 640 480
Available modes: '1366x768 1360x768 640x480 800x600 1024x768'
Couldn't get a visual
...WARNING: could not set the given mode (3)
Initializing OpenGL display
...setting mode 3: 640 480
Available modes: '1366x768 1360x768 640x480 800x600 1024x768'
Couldn't get a visual
...WARNING: could not set the given mode (3)
----- Client Shutdown (Client fatal crashed: GLimp_Init() - could not load OpenGL subsystem
) -----
RE_Shutdown( 1 )
-----------------------
GLimp_Init() - could not load OpenGL subsystem

Code:

Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".

**Yellow Pasque** · March 10th, 2012

Post/pastebin your /var/log/Xorg.0.log

**TheBigH** · March 10th, 2012

OK, here it is:

Code:

[    14.842] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    14.842] X Protocol Version 11, Revision 0
[    14.842] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[    14.842] Current Operating System: Linux hauke-K52F 2.6.38-13-generic #56-Ubuntu SMP Tue Feb 14 12:40:40 UTC 2012 i686
[    14.842] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-13-generic root=UUID=8cccd4bc-82f0-42c0-b39c-db8649aa7667 ro quiet splash vt.handoff=7
[    14.842] Build Date: 13 October 2011  05:38:22PM
[    14.842] xorg-server 2:1.10.1-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support) 
[    14.842] Current version of pixman: 0.20.2
[    14.842]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    14.842] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.843] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 10 08:30:22 2012
[    15.007] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.008] (==) No Layout section.  Using the first Screen section.
[    15.008] (==) No screen section available. Using defaults.
[    15.008] (**) |-->Screen "Default Screen Section" (0)
[    15.008] (**) |   |-->Monitor "<default monitor>"
[    15.008] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    15.008] (==) Automatically adding devices
[    15.008] (==) Automatically enabling devices
[    15.008] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.008]     Entry deleted from font path.
[    15.008] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.008]     Entry deleted from font path.
[    15.008] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.008]     Entry deleted from font path.
[    15.008] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.008]     Entry deleted from font path.
[    15.008] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.008]     Entry deleted from font path.
[    15.008] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    15.008] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    15.008] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.008] (II) Loader magic: 0x8200ac0
[    15.008] (II) Module ABI versions:
[    15.008]     X.Org ANSI C Emulation: 0.4
[    15.008]     X.Org Video Driver: 10.0
[    15.008]     X.Org XInput driver : 12.3
[    15.008]     X.Org Server Extension : 5.0
[    15.009] (--) PCI:*(0:0:2:0) 8086:0046:1043:1be2 rev 24, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000e080/8
[    15.009] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.009] (II) LoadModule: "extmod"
[    15.099] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.099] (II) Module extmod: vendor="X.Org Foundation"
[    15.099]     compiled for 1.10.1, module version = 1.0.0
[    15.099]     Module class: X.Org Server Extension
[    15.099]     ABI class: X.Org Server Extension, version 5.0
[    15.099] (II) Loading extension MIT-SCREEN-SAVER
[    15.099] (II) Loading extension XFree86-VidModeExtension
[    15.099] (II) Loading extension XFree86-DGA
[    15.099] (II) Loading extension DPMS
[    15.099] (II) Loading extension XVideo
[    15.099] (II) Loading extension XVideo-MotionCompensation
[    15.099] (II) Loading extension X-Resource
[    15.099] (II) LoadModule: "dbe"
[    15.099] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.099] (II) Module dbe: vendor="X.Org Foundation"
[    15.099]     compiled for 1.10.1, module version = 1.0.0
[    15.099]     Module class: X.Org Server Extension
[    15.099]     ABI class: X.Org Server Extension, version 5.0
[    15.099] (II) Loading extension DOUBLE-BUFFER
[    15.099] (II) LoadModule: "glx"
[    15.099] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[    15.116] (II) Module glx: vendor="NVIDIA Corporation"
[    15.116]     compiled for 4.0.2, module version = 1.0.0
[    15.116]     Module class: X.Org Server Extension
[    15.116] (II) NVIDIA GLX Module  270.41.06  Mon Apr 18 15:11:28 PDT 2011
[    15.116] (II) Loading extension GLX
[    15.116] (II) LoadModule: "record"
[    15.117] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    15.117] (II) Module record: vendor="X.Org Foundation"
[    15.117]     compiled for 1.10.1, module version = 1.13.0
[    15.117]     Module class: X.Org Server Extension
[    15.117]     ABI class: X.Org Server Extension, version 5.0
[    15.117] (II) Loading extension RECORD
[    15.117] (II) LoadModule: "dri"
[    15.117] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    15.117] (II) Module dri: vendor="X.Org Foundation"
[    15.117]     compiled for 1.10.1, module version = 1.0.0
[    15.117]     ABI class: X.Org Server Extension, version 5.0
[    15.117] (II) Loading extension XFree86-DRI
[    15.118] (II) LoadModule: "dri2"
[    15.118] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    15.118] (II) Module dri2: vendor="X.Org Foundation"
[    15.118]     compiled for 1.10.1, module version = 1.2.0
[    15.118]     ABI class: X.Org Server Extension, version 5.0
[    15.118] (II) Loading extension DRI2
[    15.118] (==) Matched intel as autoconfigured driver 0
[    15.118] (==) Matched vesa as autoconfigured driver 1
[    15.118] (==) Matched fbdev as autoconfigured driver 2
[    15.118] (==) Assigned the driver to the xf86ConfigLayout
[    15.118] (II) LoadModule: "intel"
[    15.118] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.118] (II) Module intel: vendor="X.Org Foundation"
[    15.118]     compiled for 1.10.1, module version = 2.14.0
[    15.119]     Module class: X.Org Video Driver
[    15.119]     ABI class: X.Org Video Driver, version 10.0
[    15.119] (II) LoadModule: "vesa"
[    15.119] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.119] (II) Module vesa: vendor="X.Org Foundation"
[    15.119]     compiled for 1.10.0, module version = 2.3.0
[    15.119]     Module class: X.Org Video Driver
[    15.119]     ABI class: X.Org Video Driver, version 10.0
[    15.119] (II) LoadModule: "fbdev"
[    15.119] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.119] (II) Module fbdev: vendor="X.Org Foundation"
[    15.119]     compiled for 1.10.0, module version = 0.4.2
[    15.119]     ABI class: X.Org Video Driver, version 10.0
[    15.119] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[    15.120] (II) VESA: driver for VESA chipsets: vesa
[    15.120] (II) FBDEV: driver for framebuffer: fbdev
[    15.120] (++) using VT number 7

[    15.122] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.122] (WW) Falling back to old probe method for vesa
[    15.123] (WW) Falling back to old probe method for fbdev
[    15.123] (II) Loading sub module "fbdevhw"
[    15.123] (II) LoadModule: "fbdevhw"
[    15.123] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    15.123] (II) Module fbdevhw: vendor="X.Org Foundation"
[    15.123]     compiled for 1.10.1, module version = 0.0.2
[    15.123]     ABI class: X.Org Video Driver, version 10.0
[    15.123] drmOpenDevice: node name is /dev/dri/card0
[    15.123] drmOpenDevice: open result is 9, (OK)
[    15.123] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    15.123] drmOpenDevice: node name is /dev/dri/card0
[    15.123] drmOpenDevice: open result is 9, (OK)
[    15.123] drmOpenByBusid: drmOpenMinor returns 9
[    15.123] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    15.123] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    15.123] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    15.123] (==) intel(0): RGB weight 888
[    15.123] (==) intel(0): Default visual is TrueColor
[    15.123] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[    15.123] (--) intel(0): Chipset: "Arrandale"
[    15.123] (**) intel(0): Relaxed fencing enabled
[    15.123] (**) intel(0): Tiling enabled
[    15.123] (**) intel(0): SwapBuffers wait enabled
[    15.123] (==) intel(0): video overlay key set to 0x101fe
[    15.124] (II) intel(0): Output LVDS1 has no monitor section
[    15.124] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    15.124] (II) intel(0): Output VGA1 has no monitor section
[    15.128] (II) intel(0): Output HDMI1 has no monitor section
[    15.129] (II) intel(0): Output DP1 has no monitor section
[    15.129] (II) intel(0): EDID for output LVDS1
[    15.129] (II) intel(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[    15.129] (II) intel(0): Year: 2009  Week: 1
[    15.129] (II) intel(0): EDID Version: 1.3
[    15.129] (II) intel(0): Digital Display Input
[    15.129] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    15.129] (II) intel(0): Gamma: 2.20
[    15.129] (II) intel(0): No DPMS capabilities specified
[    15.129] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.129] (II) intel(0): First detailed timing is preferred mode
[    15.129] (II) intel(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    15.129] (II) intel(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    15.130] (II) intel(0): Manufacturer's mask: 0
[    15.130] (II) intel(0): Supported detailed timing:
[    15.130] (II) intel(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[    15.130] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    15.130] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[    15.130] (II) intel(0): Unknown vendor-specific block f
[    15.130] (II) intel(0):  AUO
[    15.130] (II) intel(0):  B156XW02 V6
[    15.130] (II) intel(0): EDID (in hex):
[    15.130] (II) intel(0):     00ffffffffffff0006afec2600000000
[    15.130] (II) intel(0):     01130103802213780ad7759355558d29
[    15.130] (II) intel(0):     24505400000001010101010101010101
[    15.130] (II) intel(0):     0101010101010c1c56a0500010303020
[    15.130] (II) intel(0):     360058c1100000180000000f00000000
[    15.130] (II) intel(0):     00000000000000000020000000fe0041
[    15.130] (II) intel(0):     554f0a202020202020202020000000fe
[    15.130] (II) intel(0):     004231353658573032205636200a0065
[    15.130] (II) intel(0): EDID vendor "AUO", prod id 9964
[    15.130] (II) intel(0): Printing DDC gathered Modelines:
[    15.130] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    15.130] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    15.130] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    15.130] (II) intel(0): Printing probed modes for output LVDS1
[    15.130] (II) intel(0): Modeline "1366x768"x60.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    15.130] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    15.130] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    15.130] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    15.130] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    15.130] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    15.130] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    15.130] (II) intel(0): EDID for output VGA1
[    15.135] (II) intel(0): EDID for output HDMI1
[    15.136] (II) intel(0): EDID for output DP1
[    15.136] (II) intel(0): Output LVDS1 connected
[    15.136] (II) intel(0): Output VGA1 disconnected
[    15.136] (II) intel(0): Output HDMI1 disconnected
[    15.136] (II) intel(0): Output DP1 disconnected
[    15.136] (II) intel(0): Using exact sizes for initial modes
[    15.136] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    15.136] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    15.136] (II) intel(0): Kernel page flipping support detected, enabling
[    15.136] (**) intel(0): Display dimensions: (340, 190) mm
[    15.136] (**) intel(0): DPI set to (102, 102)
[    15.136] (II) Loading sub module "fb"
[    15.136] (II) LoadModule: "fb"
[    15.136] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.136] (II) Module fb: vendor="X.Org Foundation"
[    15.136]     compiled for 1.10.1, module version = 1.0.0
[    15.136]     ABI class: X.Org ANSI C Emulation, version 0.4
[    15.136] (II) UnloadModule: "vesa"
[    15.136] (II) Unloading vesa
[    15.136] (II) UnloadModule: "fbdev"
[    15.136] (II) Unloading fbdev
[    15.136] (II) UnloadModule: "fbdevhw"
[    15.136] (II) Unloading fbdevhw
[    15.136] (==) Depth 24 pixmap format is 32 bpp
[    15.136] (==) intel(0): VideoRam: 262144 KB
[    15.136] (II) intel(0): [DRI2] Setup complete
[    15.136] (II) intel(0): [DRI2]   DRI driver: i965
[    15.137] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    15.145] (II) UXA(0): Driver registered support for the following operations:
[    15.145] (II)         solid
[    15.145] (II)         copy
[    15.145] (II)         composite (RENDER acceleration)
[    15.145] (II)         put_image
[    15.145] (II)         get_image
[    15.145] (==) intel(0): Backing store disabled
[    15.145] (==) intel(0): Silken mouse enabled
[    15.145] (II) intel(0): Initializing HW Cursor
[    15.216] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.216] (==) intel(0): DPMS enabled
[    15.216] (==) intel(0): Intel XvMC decoder enabled
[    15.216] (II) intel(0): Set up textured video
[    15.217] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    15.217] (II) intel(0): direct rendering: DRI2 Enabled
[    15.217] (==) intel(0): hotplug detection: "enabled"
[    15.217] (--) RandR disabled
[    15.217] (II) Initializing built-in extension Generic Event Extension
[    15.217] (II) Initializing built-in extension SHAPE
[    15.217] (II) Initializing built-in extension MIT-SHM
[    15.217] (II) Initializing built-in extension XInputExtension
[    15.217] (II) Initializing built-in extension XTEST
[    15.217] (II) Initializing built-in extension BIG-REQUESTS
[    15.217] (II) Initializing built-in extension SYNC
[    15.217] (II) Initializing built-in extension XKEYBOARD
[    15.217] (II) Initializing built-in extension XC-MISC
[    15.217] (II) Initializing built-in extension SECURITY
[    15.217] (II) Initializing built-in extension XINERAMA
[    15.217] (II) Initializing built-in extension XFIXES
[    15.217] (II) Initializing built-in extension RENDER
[    15.217] (II) Initializing built-in extension RANDR
[    15.217] (II) Initializing built-in extension COMPOSITE
[    15.217] (II) Initializing built-in extension DAMAGE
[    15.217] (II) Initializing built-in extension GESTURE
[    15.220] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    15.228] (II) intel(0): Setting screen physical size to 361 x 203
[    15.238] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    15.249] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    15.249] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.249] (II) LoadModule: "evdev"
[    15.249] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.250] (II) Module evdev: vendor="X.Org Foundation"
[    15.250]     compiled for 1.10.0.902, module version = 2.6.0
[    15.250]     Module class: X.Org XInput Driver
[    15.250]     ABI class: X.Org XInput driver, version 12.3
[    15.250] (II) Using input driver 'evdev' for 'Power Button'
[    15.250] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.250] (**) Power Button: always reports core events
[    15.250] (**) Power Button: Device: "/dev/input/event2"
[    15.250] (--) Power Button: Found keys
[    15.250] (II) Power Button: Configuring as keyboard
[    15.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    15.250] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    15.250] (**) Option "xkb_rules" "evdev"
[    15.250] (**) Option "xkb_model" "pc105"
[    15.250] (**) Option "xkb_layout" "us"
[    15.251] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    15.251] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.251] (II) Using input driver 'evdev' for 'Video Bus'
[    15.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.252] (**) Video Bus: always reports core events
[    15.252] (**) Video Bus: Device: "/dev/input/event8"
[    15.252] (--) Video Bus: Found keys
[    15.252] (II) Video Bus: Configuring as keyboard
[    15.252] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input8/event8"
[    15.252] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    15.252] (**) Option "xkb_rules" "evdev"
[    15.252] (**) Option "xkb_model" "pc105"
[    15.252] (**) Option "xkb_layout" "us"
[    15.259] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    15.259] (II) No input driver/identifier specified (ignoring)
[    15.259] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    15.259] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    15.259] (II) Using input driver 'evdev' for 'Sleep Button'
[    15.259] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.259] (**) Sleep Button: always reports core events
[    15.259] (**) Sleep Button: Device: "/dev/input/event1"
[    15.259] (--) Sleep Button: Found keys
[    15.259] (II) Sleep Button: Configuring as keyboard
[    15.259] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    15.259] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    15.259] (**) Option "xkb_rules" "evdev"
[    15.259] (**) Option "xkb_model" "pc105"
[    15.259] (**) Option "xkb_layout" "us"
[    15.262] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event6)
[    15.262] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    15.262] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    15.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.262] (**) USB 2.0 Camera: always reports core events
[    15.262] (**) USB 2.0 Camera: Device: "/dev/input/event6"
[    15.262] (--) USB 2.0 Camera: Found keys
[    15.262] (II) USB 2.0 Camera: Configuring as keyboard
[    15.262] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6/event6"
[    15.262] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[    15.262] (**) Option "xkb_rules" "evdev"
[    15.262] (**) Option "xkb_model" "pc105"
[    15.262] (**) Option "xkb_layout" "us"
[    15.265] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[    15.265] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    15.265] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    15.265] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.265] (**) Logitech USB Optical Mouse: always reports core events
[    15.265] (**) Logitech USB Optical Mouse: Device: "/dev/input/event4"
[    15.265] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[    15.266] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[    15.266] (--) Logitech USB Optical Mouse: Found relative axes
[    15.266] (--) Logitech USB Optical Mouse: Found x and y relative axes
[    15.266] (II) Logitech USB Optical Mouse: Configuring as mouse
[    15.266] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[    15.266] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    15.266] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.266] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4/event4"
[    15.266] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[    15.266] (II) Logitech USB Optical Mouse: initialized for relative axes.
[    15.266] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    15.266] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    15.266] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    15.266] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    15.266] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    15.266] (II) No input driver/identifier specified (ignoring)
[    15.270] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[    15.270] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    15.270] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[    15.270] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.270] (**) Asus Laptop extra buttons: always reports core events
[    15.270] (**) Asus Laptop extra buttons: Device: "/dev/input/event5"
[    15.284] (--) Asus Laptop extra buttons: Found keys
[    15.284] (II) Asus Laptop extra buttons: Configuring as keyboard
[    15.284] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[    15.284] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
[    15.284] (**) Option "xkb_rules" "evdev"
[    15.284] (**) Option "xkb_model" "pc105"
[    15.284] (**) Option "xkb_layout" "us"
[    15.284] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    15.285] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    15.285] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    15.285] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.285] (**) AT Translated Set 2 keyboard: always reports core events
[    15.285] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    15.285] (--) AT Translated Set 2 keyboard: Found keys
[    15.285] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    15.285] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    15.285] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    15.285] (**) Option "xkb_rules" "evdev"
[    15.285] (**) Option "xkb_model" "pc105"
[    15.285] (**) Option "xkb_layout" "us"
[    15.286] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[    15.286] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    15.286] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    15.286] (II) LoadModule: "synaptics"
[    15.286] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    15.286] (II) Module synaptics: vendor="X.Org Foundation"
[    15.286]     compiled for 1.10.1, module version = 1.3.99
[    15.286]     Module class: X.Org XInput Driver
[    15.286]     ABI class: X.Org XInput driver, version 12.3
[    15.286] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    15.286] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    15.286] (**) ETPS/2 Elantech Touchpad: always reports core events
[    15.286] (**) Option "Device" "/dev/input/event7"
[    15.288] (--) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
[    15.288] (--) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
[    15.288] (II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[    15.288] (--) ETPS/2 Elantech Touchpad: buttons: left right double triple
[    15.288] (--) ETPS/2 Elantech Touchpad: invalid pressure range.  defaulting to 0 - 256
[    15.288] (--) ETPS/2 Elantech Touchpad: invalid finger width range.  defaulting to 0 - 16
[    15.292] (--) ETPS/2 Elantech Touchpad: touchpad found
[    15.292] (**) ETPS/2 Elantech Touchpad: always reports core events
[    15.293] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    15.634] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
[    15.634] (**) ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    15.634] (**) ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    15.634] (**) ETPS/2 Elantech Touchpad: AccelFactor is now 0.147
[    15.635] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    15.635] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    15.635] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    15.635] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    15.680] (II) ETPS/2 Elantech Touchpad: failed to open grail, no gesture support
[    15.680] (--) ETPS/2 Elantech Touchpad: touchpad found
[    15.680] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    15.680] (II) No input driver/identifier specified (ignoring)
[    17.527] (II) intel(0): EDID vendor "AUO", prod id 9964
[    17.527] (II) intel(0): Printing DDC gathered Modelines:
[    17.527] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    17.535] (II) intel(0): EDID vendor "AUO", prod id 9964
[    17.537] (II) intel(0): Printing DDC gathered Modelines:
[    17.537] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    17.561] (II) intel(0): EDID vendor "AUO", prod id 9964
[    17.561] (II) intel(0): Printing DDC gathered Modelines:
[    17.561] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    17.573] (II) intel(0): EDID vendor "AUO", prod id 9964
[    17.573] (II) intel(0): Printing DDC gathered Modelines:
[    17.573] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    33.720] (II) intel(0): EDID vendor "AUO", prod id 9964
[    33.720] (II) intel(0): Printing DDC gathered Modelines:
[    33.720] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    33.728] (II) intel(0): EDID vendor "AUO", prod id 9964
[    33.728] (II) intel(0): Printing DDC gathered Modelines:
[    33.728] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    33.742] (II) intel(0): EDID vendor "AUO", prod id 9964
[    33.742] (II) intel(0): Printing DDC gathered Modelines:
[    33.742] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    33.753] (II) intel(0): EDID vendor "AUO", prod id 9964
[    33.753] (II) intel(0): Printing DDC gathered Modelines:
[    33.753] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[    40.814] (II) intel(0): EDID vendor "AUO", prod id 9964
[    40.814] (II) intel(0): Printing DDC gathered Modelines:
[    40.814] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[ 33907.619] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 33907.640] (II) intel(0): Printing DDC gathered Modelines:
[ 33907.640] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[ 37966.620] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 37966.620] (II) intel(0): Printing DDC gathered Modelines:
[ 37966.620] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[ 47266.872] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 47266.872] (II) intel(0): Printing DDC gathered Modelines:
[ 47266.872] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[ 51976.829] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 51976.829] (II) intel(0): Printing DDC gathered Modelines:
[ 51976.829] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[ 52503.136] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 52503.136] (II) intel(0): Printing DDC gathered Modelines:
[ 52503.136] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)
[ 53142.644] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 53142.644] (II) intel(0): Printing DDC gathered Modelines:
[ 53142.644] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz)

**Yellow Pasque** · March 10th, 2012

You have an intel GPU. Why do you have the nvidia driver installed?

**TheBigH** · March 10th, 2012

Originally Posted by Temüjin

You have an intel GPU. Why do you have the nvidia driver installed?

I have no idea. AFAIK it's been there since the beginning, because I don't remember installing it in the first place.

So should I get rid of it and get the right driver? How do I do that?

**Yellow Pasque** · March 12th, 2012

Originally Posted by TheBigH

I have no idea. AFAIK it's been there since the beginning, because I don't remember installing it in the first place.

Just earlier in the thread, you said..

I've uninstalled and reinstalled my Nvidia drivers

Anyway...Getting rid of nvidia driver depends on how you installed it. Generally, this works:

Code:

sudo apt-get purge nvidia*
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core

**TheBigH** · March 16th, 2012

Originally Posted by Temüjin

Just earlier in the thread, you said..

Yes indeed. What I mean is, I removed and re-installed something that had already been there for who knows how long.

Anyway...Getting rid of nvidia driver depends on how you installed it. Generally, this works:

Code:

sudo apt-get purge nvidia*
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core

This seems to have fixed my problem. At least some of my openGL programs are running again. Thank you for your help.

Thread: OpenGL trouble - could not load OpenGL subsystem

Thread Tools

Display

OpenGL trouble - could not load OpenGL subsystem

Re: OpenGL trouble - could not load OpenGL subsystem

Re: OpenGL trouble - could not load OpenGL subsystem

Re: OpenGL trouble - could not load OpenGL subsystem

Re: OpenGL trouble - could not load OpenGL subsystem

Re: OpenGL trouble - could not load OpenGL subsystem

Re: OpenGL trouble - could not load OpenGL subsystem

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions