Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: USB to SATA & PATA Adapter (ID 152d:2338)

  1. #1
    Join Date
    Jan 2008
    Beans
    147

    Question USB to SATA & PATA Adapter (ID 152d:2338)

    Hi there! I have some problems with a USB to SATA & PATA Adapter.
    I plugged in a IDE harddisk, which should have some partitions on it. But i can't mount them, (there is only a /dev/sdb and no /dev/sdb1 after i plug the adapter)

    lsusb gives me:
    Code:
    Bus 007 Device 003: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      idVendor           0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
      idProduct          0x2338 JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
      bcdDevice            1.00
      iManufacturer           1 JMicron
      iProduct                2 USB to ATA/ATAPI Bridge
      iSerial                 5 152D203380B6
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           32
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          4 USB Mass Storage
        bmAttributes         0xc0
          Self Powered
        MaxPower                2mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           2
          bInterfaceClass         8 Mass Storage
          bInterfaceSubClass      6 SCSI
          bInterfaceProtocol     80 Bulk (Zip)
          iInterface              6 MSC Bulk-Only Transfer
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
    Device Qualifier (for other device speed):
      bLength                10
      bDescriptorType         6
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      bNumConfigurations      1
    can't get debug descriptor: Connection timed out
    Device Status:     0xd301
      Self Powered
    udevmonitor gives the following (first plug-out, then plug in)
    Code:
    UEVENT[1225540844.626385] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0/usb_endpoint/usbdev7.5_ep81 (usb_endpoint)
    UEVENT[1225540844.626433] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0/usb_endpoint/usbdev7.5_ep02 (usb_endpoint)
    UEVENT[1225540844.626455] remove   /class/scsi_generic/sg2 (scsi_generic)
    UEVENT[1225540844.627225] remove   /class/scsi_device/6:0:0:0 (scsi_device)
    UEVENT[1225540844.627256] remove   /class/scsi_disk/6:0:0:0 (scsi_disk)
    UEVENT[1225540844.627276] remove   /block/sdb (block)
    UEVENT[1225540844.627294] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0/host6/target6:0:0/6:0:0:0 (scsi)
    UEVENT[1225540844.627313] remove   /class/scsi_host/host6 (scsi_host)
    UEVENT[1225540844.627331] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0 (usb)
    UEVENT[1225540844.627640] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/usb_endpoint/usbdev7.5_ep00 (usb_endpoint)
    UEVENT[1225540844.627668] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2 (usb)
    UDEV  [1225540844.629129] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0/usb_endpoint/usbdev7.5_ep81 (usb_endpoint)
    UDEV  [1225540844.630798] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0/usb_endpoint/usbdev7.5_ep02 (usb_endpoint)
    UDEV  [1225540844.632517] remove   /class/scsi_generic/sg2 (scsi_generic)
    UDEV  [1225540844.651107] remove   /class/scsi_device/6:0:0:0 (scsi_device)
    UDEV  [1225540844.652989] remove   /class/scsi_disk/6:0:0:0 (scsi_disk)
    UDEV  [1225540844.708680] remove   /block/sdb (block)
    UDEV  [1225540844.719389] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0/host6/target6:0:0/6:0:0:0 (scsi)
    UDEV  [1225540844.738326] remove   /class/scsi_host/host6 (scsi_host)
    UDEV  [1225540844.738951] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0 (usb)
    UDEV  [1225540844.790744] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2/usb_endpoint/usbdev7.5_ep00 (usb_endpoint)
    UDEV  [1225540844.806742] remove   /devices/pci0000:00/0000:00:1d.7/usb7/7-2 (usb)
    UEVENT[1225540845.119478] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.3_ep81 (usb_endpoint)
    UEVENT[1225540845.119521] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input13/mouse1 (input)
    UDEV  [1225540845.121116] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.3_ep81 (usb_endpoint)
    UDEV  [1225540845.122631] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input13/mouse1 (input)
    UEVENT[1225540845.130893] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input13/event2 (input)
    UDEV  [1225540845.134977] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input13/event2 (input)
    UEVENT[1225540845.163131] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input13 (input)
    UEVENT[1225540845.163175] remove   /devices/virtual/hidraw/hidraw0 (hidraw)
    UEVENT[1225540845.163189] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UEVENT[1225540845.163202] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.3_ep00 (usb_endpoint)
    UEVENT[1225540845.163216] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UDEV  [1225540845.164410] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input13 (input)
    UDEV  [1225540845.166676] remove   /devices/virtual/hidraw/hidraw0 (hidraw)
    UDEV  [1225540845.168207] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UDEV  [1225540845.170840] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.3_ep00 (usb_endpoint)
    UDEV  [1225540845.172200] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UEVENT[1225540845.450271] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UEVENT[1225540845.450355] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.4_ep00 (usb_endpoint)
    UEVENT[1225540845.453223] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UDEV  [1225540845.456892] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UDEV  [1225540845.459870] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.4_ep00 (usb_endpoint)
    UEVENT[1225540845.467024] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14 (input)
    UEVENT[1225540845.485812] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/mouse1 (input)
    UEVENT[1225540845.509840] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/event2 (input)
    UEVENT[1225540845.509870] add      /devices/virtual/hidraw/hidraw0 (hidraw)
    UEVENT[1225540845.509879] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.4_ep81 (usb_endpoint)
    UDEV  [1225540845.511070] add      /devices/virtual/hidraw/hidraw0 (hidraw)
    UDEV  [1225540845.530890] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UDEV  [1225540845.558787] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.4_ep81 (usb_endpoint)
    UDEV  [1225540845.574283] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14 (input)
    UDEV  [1225540845.581910] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/mouse1 (input)
    UDEV  [1225540845.596828] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/event2 (input)
    UEVENT[1225540883.310160] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.4_ep81 (usb_endpoint)
    UEVENT[1225540883.310217] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/mouse1 (input)
    UDEV  [1225540883.312214] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.4_ep81 (usb_endpoint)
    UDEV  [1225540883.314839] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/mouse1 (input)
    UEVENT[1225540883.321813] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/event2 (input)
    UDEV  [1225540883.324787] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14/event2 (input)
    UEVENT[1225540883.339146] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14 (input)
    UEVENT[1225540883.339188] remove   /devices/virtual/hidraw/hidraw0 (hidraw)
    UEVENT[1225540883.339209] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UEVENT[1225540883.339228] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.4_ep00 (usb_endpoint)
    UEVENT[1225540883.339248] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UDEV  [1225540883.340955] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input14 (input)
    UDEV  [1225540883.342709] remove   /devices/virtual/hidraw/hidraw0 (hidraw)
    UDEV  [1225540883.348573] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UDEV  [1225540883.350653] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.4_ep00 (usb_endpoint)
    UDEV  [1225540883.361309] remove   /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UEVENT[1225540883.683977] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UEVENT[1225540883.684555] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.5_ep00 (usb_endpoint)
    UDEV  [1225540883.687292] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1 (usb)
    UDEV  [1225540883.690219] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/usb_endpoint/usbdev3.5_ep00 (usb_endpoint)
    UEVENT[1225540883.708219] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input15 (input)
    UEVENT[1225540883.725775] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input15/mouse1 (input)
    UEVENT[1225540883.757713] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input15/event2 (input)
    UEVENT[1225540883.757742] add      /devices/virtual/hidraw/hidraw0 (hidraw)
    UEVENT[1225540883.758018] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.5_ep81 (usb_endpoint)
    UDEV  [1225540883.759090] add      /devices/virtual/hidraw/hidraw0 (hidraw)
    UDEV  [1225540883.762549] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0 (usb)
    UDEV  [1225540883.764465] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/usb_endpoint/usbdev3.5_ep81 (usb_endpoint)
    UDEV  [1225540883.834769] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input15 (input)
    UDEV  [1225540883.842675] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input15/event2 (input)
    UDEV  [1225540883.859208] add      /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input15/mouse1 (input)
    Also while plugout & plugin dmesg gives the following:
    Code:
    [ 1911.206073] usb 7-2: USB disconnect, address 6
    [ 1911.704342] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
    [ 1911.704350] usb 3-1: USB disconnect, address 5
    [ 1911.840099] usb 3-1: new low speed USB device using uhci_hcd and address 6
    [ 1911.921983] usb 3-1: configuration #1 chosen from 1 choice
    [ 1911.945229] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input16
    [ 1911.995264] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
    [ 1930.385499] usb 7-2: new high speed USB device using ehci_hcd and address 7
    [ 1930.443360] usb 7-2: configuration #1 chosen from 1 choice
    [ 1930.455349] scsi8 : SCSI emulation for USB Mass Storage devices
    [ 1930.456794] usb-storage: device found at 7
    [ 1930.456801] usb-storage: waiting for device to settle before scanning
    [ 1933.296079] usb-storage: device scan complete
    [ 1933.296914] scsi 8:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
    [ 1933.303973] sd 8:0:0:0: [sdb] Attached SCSI disk
    [ 1933.304057] sd 8:0:0:0: Attached scsi generic sg2 type 0
    And something really strange, in dmesg, while the adpater is plugged there sometimes come messages like
    Code:
    [  879.967209] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  879.967237] FAT: unable to read boot sector
    [  879.969262] FAT: unable to read boot sector
    [  880.108478] hfs: unable to find HFS+ superblock
    [  880.111005] hfs: unable to find HFS+ superblock
    [  880.141300] hfs: can't find a HFS filesystem on dev sdb.
    [  880.143113] hfs: can't find a HFS filesystem on dev sdb.
    [  880.232284] EXT3-fs: unable to read superblock
    [  880.234519] EXT3-fs: unable to read superblock
    [  880.277593] EXT2-fs: unable to read superblock
    [  880.279645] EXT2-fs: unable to read superblock
    [  880.281528] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 2, size 4096)
    [  880.281545] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 16, size 4096)
    [  880.281547] ReiserFS: sdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdb
    [  880.283191] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 2, size 4096)
    [  880.283206] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 16, size 4096)
    [  880.283209] ReiserFS: sdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdb
    [  880.404237] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
    [  880.404700] SGI XFS Quota Management subsystem
    [  880.404914] XFS: SB read failed
    [  880.407166] XFS: SB read failed
    [  880.443947] JFS: nTxBlock = 8192, nTxLock = 65536
    [  893.209983] UDF-fs: No partition found (1)
    [  893.218340] UDF-fs: No partition found (1)
    [  893.223476] isofs_fill_super: bread failed, dev=sdb, iso_blknum=16, block=32
    [  893.228766] isofs_fill_super: bread failed, dev=sdb, iso_blknum=16, block=32
    [  893.233436] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [  893.233640] FAT: unable to read boot sector
    [  893.235491] FAT: unable to read boot sector
    [  893.249983] hfs: unable to find HFS+ superblock
    [  893.251869] hfs: unable to find HFS+ superblock
    [  893.253770] hfs: can't find a HFS filesystem on dev sdb.
    [  893.255696] hfs: can't find a HFS filesystem on dev sdb.
    [  893.257640] EXT3-fs: unable to read superblock
    [  893.259460] EXT3-fs: unable to read superblock
    [  893.261143] EXT2-fs: unable to read superblock
    [  893.262877] EXT2-fs: unable to read superblock
    [  893.264567] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 2, size 4096)
    [  893.264583] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 16, size 4096)
    [  893.264585] ReiserFS: sdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdb
    [  893.266263] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 2, size 4096)
    [  893.266279] ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 16, size 4096)
    [  893.266281] ReiserFS: sdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdb
    [  893.332551] XFS: SB read failed
    [  893.334319] XFS: SB read failed
    Since i would like to edit the defined partitions on that hard disk, i also opened gparted, but it only shows the hard disk sda.
    fdisk also isn't able to look at sdb
    Code:
    kaefert@Mobulux:~$ sudo fdisk /dev/sdb
    
    Konnte /dev/sdb nicht lesen
    kaefert@Mobulux:~$
    If anybody has a idea how to solve this problem, please tell me.
    Last edited by kaefert66014235; November 1st, 2008 at 01:18 PM.

  2. #2
    Join Date
    Jul 2006
    Location
    Belgium
    Beans
    50
    Distro
    Ubuntu

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    did you find a solution now for this one ?
    I have exactly the same device (conceptronic USB connector for IDE & SATA drives), but the Jmicron seems to need a driver, I guess.
    It recognizes a /dev/sdd with me, but I can't fdisk it.

  3. #3
    Join Date
    Jan 2008
    Beans
    11
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    Have the same problem? Any info?

    For me it doesn't work even under WinXP, Vista... strange, it's already second device I try - different manufacturer, the same chip.

  4. #4
    Join Date
    Jan 2008
    Beans
    11
    Distro
    Ubuntu 10.04 Lucid Lynx

    Question Re: USB to SATA & PATA Adapter (ID 152d:2338)

    Hm, have now tried different hard drive and it simply works. So there seems to be some incompatibility between the adapter and some types of hard drives.

    For me my old IBM DeskStar - Model IC35L060AVER07-0 ATA/IDE 60GB works but much newer Seagate Barracuda 7200.7 Model ST380011A ATA/IDE 80GB does not.

  5. #5
    Join Date
    Oct 2007
    Beans
    8

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    I've just had this exact problem, and it was caused by me plugging in the USB interface before connecting the disk.

    Once I unplugged the USB device and reconnected it with the disk already connected, everything worked fine.

  6. #6
    Join Date
    Apr 2008
    Location
    /home/VitaLinux/
    Beans
    99
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    I got an adapter with that Jmicron chip. It's been giving me just headaches! Does anyone have come up with a solution?

    Linux User #469180

  7. #7
    Join Date
    Jun 2008
    Location
    Reading, UK
    Beans
    1
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    I also have one of these, it's worked fine under Gutsy onwards (I'm currently running Koala). There was a quality issue, the (UK) mains plug was not correctly fitted - the retaining screws hadn't been done up on either the earth or neutral pins. Easily fixed and that solved the intermittent problem that I had initially.

    Make sure you power the drive up first, let it settle for a short while and then plug the USB in. No drivers needed, it just works with every disk that I've thrown at it (IDE/SATA/laptop).

    (Even the one from my Sony HDD recorder, which is a non-standard file system that I couldn't mount for love nor money - but I was still able to dd an image from it. That's another story anyway)


    HTH
    George

  8. #8
    Join Date
    Aug 2010
    Beans
    9

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    I am havin the same problem. I'm using Ubuntu Lucid 10.4 kernel 2.6.32-25

    I have a SATA disk of 1 TB and a JMicron USB adapter. The output of dmesg | tail is:

    Code:
    [ 2281.672832] usb 2-3: new high speed USB device using ehci_hcd and address 5
    [ 2281.822614] usb 2-3: configuration #1 chosen from 1 choice
    [ 2281.824017] scsi9 : SCSI emulation for USB Mass Storage devices
    [ 2281.824374] usb-storage: device found at 5
    [ 2281.824379] usb-storage: waiting for device to settle before scanning
    [ 2286.820687] usb-storage: device scan complete
    [ 2286.821540] scsi 9:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
    [ 2286.822329] sd 9:0:0:0: Attached scsi generic sg2 type 0
    [ 2286.825526] sd 9:0:0:0: [sdb] Attached SCSI disk
    The disk utility recognizes the device but not any partition.

  9. #9
    Join Date
    Aug 2006
    Location
    Luxembourg
    Beans
    7
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    Hi,

    I have exactly the same problem, the device I bought is a Freecom Hard Drive Dock and in lsusb it shows me the chip is the JMicron Technology Corp. / JMicron USA Technology Corp. transcend storejet 25P. I've a 1TB Western Digital Drive attached to it with an NTFS partition on it. In dmesg it only shows me that the drive sdb has been found but no partitions what so ever. cfdisk /dev/sdb gives me an error. Here are the details.

    I am already happy that I am not the only one with this problem, although it's a shame it doesn't work, well hopefully with the next kernel release we'll be a bit luckier .


    lshw output
    Code:
    *-generic:0
                    description: System peripheral
                    product: SD/MMC Host Controller
                    vendor: JMicron Technology Corp.
                    physical id: 0
                    bus info: pci@0000:02:00.0
                    version: 00
                    width: 32 bits
                    clock: 33MHz
                    capabilities: pm pciexpress msi bus_master cap_list rom
                    configuration: driver=sdhci-pci latency=0
                    resources: irq:16 memory:f4500000-f45000ff memory:c0000000-c000ffff(prefetchable)
               *-generic:1 UNCLAIMED
                    description: SD Host controller
                    product: Standard SD Host Controller
                    vendor: JMicron Technology Corp.
                    physical id: 0.2
                    bus info: pci@0000:02:00.2
                    version: 00
                    width: 32 bits
                    clock: 33MHz
                    capabilities: pm pciexpress msi cap_list
                    configuration: latency=0
                    resources: memory:f4500400-f45004ff
               *-generic:2
                    description: System peripheral
                    product: MS Host Controller
                    vendor: JMicron Technology Corp.
                    physical id: 0.3
                    bus info: pci@0000:02:00.3
                    version: 00
                    width: 32 bits
                    clock: 33MHz
                    capabilities: pm pciexpress msi bus_master cap_list
                    configuration: driver=jmb38x_ms latency=0
    dmesg output
    Code:
    [ 2141.343035] usb-storage: device found at 7
    [ 2141.343039] usb-storage: waiting for device to settle before scanning
    [ 2146.342927] usb-storage: device scan complete
    [ 2159.089256] scsi 6:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
    [ 2159.090011] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [ 2175.548640] sd 6:0:0:0: [sdb] Attached SCSI disk

    cfdisk output
    Code:
    FATAL ERROR: Cannot read disk drive

    Thx for your attention.

  10. #10
    Join Date
    Dec 2007
    Location
    New York City
    Beans
    4
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: USB to SATA & PATA Adapter (ID 152d:2338)

    I'm having the same problem, except with a SSD. Anyone find a fix? Thanks!

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •