I believe you're thinking incorrectly, as the script you downloaded does
not intall your driver, as it only gets information about your computer.
What you want to do is find out if your current computer, running some
Linux Distro, will support and use a Winmodem, so you don't have to purchase another one.
Well, the last line you posted says it all! READ the text file first as
this post states. "Please read 1stRead.txt first for Guidance." Then,
READ the "ModemData.txt" document. Now I know you are going to say I
don't understand all that information, so the easy way is to send that
information to Marvin, and the folks at linmodems so they can decipher it for you.
Basically, you have three options
1. Go to www.linmodems.org and get help there with the modem,
if it is a Winmodem. Marvin and those folks are very helpful. You will
download the ScanModem.tool and execute that script to get the
information on the modem. Then subscribe to the Linmodems discussion
list. Then send Marvin an email (in plain text..ONLY) to the discussion
list. He will analyze your results and get back to you on what to
do to get the correct drivers to get them working. You will be working
for several days with lots of emails,......unless you are lucky.
Now let me repeat that so you understand, "Your email MUST BE PLAIN TEXT
not html. Just change your email format to TEXT! "Only plain text email
is forwarded by the Discuss@Linmodems.org List Server, as
HTML can contain viruses."
2. Purchase a USRobotics USB Modem for ~$44.00 (Walmart)
3. Search Ebay for a Serial External USRobotics Hardware modem.
I'd suggest options 2 or 3, but some folks are lucky, and get their
Once that is done you're 80% done.........or you can use an External
USR Modem with your serial port or USB to serial Adapter and forget the
extra multiple days' hassel of the Winmodem..... Walmart also is selling
a USB External Modem for around $44.00 that is supposed to work good
without a wallwart or extra serial cables......
If you don't have a serial port, or want to use a USB port check out
The USB to Serial Converter is from www.newegg.com and is a 82E16812156008
SABRENT 1 ft. USB to Serial db9 Male RS-232 (9-pin) Converter Model SBT-USC1M - Retail @ $10.99.
These work wonderful with wvdial, etc.
Once that decision is made, you will need to set up the pap-secrets and/or chap-secrets file by running the following in a Terminal Window:
You will need your userlogin, password, ISP provider information, and
pap or chap information for the connection. (You can set up pap and
then chap, if pap doesn't work.) Basically you just answer the questions
that are presented. You can delete a configurations and start over if
you need to from the menu selections.
For more information try:
pap-secrets file contains:
(NOTE: File Format may have changed for versions later than 8.04)
Now after ppp is setup, you will need to set up wvdial. Power up the modem, and connect it to your serial port.
# OUTBOUND connections
# Here you should add your userid password to connect to your providers via
# PAP. The * means that the password is to be used for ANY host you connect
# to. Thus you do not have to worry about the foreign machine name. Just
# replace password with your password.
# If you have different providers with different passwords then you better
# remove the following line.
# * password
"firstname.lastname@example.org" provider "yourpassword"
In a Terminal window do:
You should get a configuration file like this at
sudo wvdialconf /etc/wvdial.conf
/etc/wvdial.conf (you may need to add a few things...)
You might want to double check the following settings:
Auto DNS = yes
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Baud = 48800
New PPPD = yes
Stupid mode = yes
;carrier check = no
Modem = /dev/ttyACM0
ISDN = 0
Phone = 4460568
Password = yourpassword
Username = email@example.com
Checking settings of: /etc/ppp/options
You also need to do this after wvdial is installed and
after pppconfig is executed:
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Now assuming that your pap-secrets and or your chap-secrets file is
correct you should be able to use wvdial to dial the connection with:
You should hear the modem go OFFHOOK with dialtone, Dial, and connect.
REMEMBER after wvdial dials, you can pick up a handset and monitor the
activity by listening to what is going on with the communications.
If your config file is correct you should authenticate and then control
will be passed to ppp. You will see several strings of HEX (funny
characters) and then you should stay connected. (you will use CNTL C to
terminate the session when you are done, but for this session you MUST
leave the Terminal window OPEN...) You may have to uncheck the box
marked OFFLINE when you open your browser to make it online. Surf,
then terminate the open session with CNTL C in the open terminal window
where you initiated wvdial.
Setting up PPP Manually
When you get everything working, I'd suggest backing up the pap-secrets,
chap-secrets, and wvdial.conf files....just in case.
You can use:
to save the backup files.
sudo cp pap-secrets pap-secrets.sav
sudo cp chap-secrets chap-secrets.sav
cp wvdial.conf wvdial.sav