Results 1 to 6 of 6

Thread: BusyBox Error when installing Intrepid Ibex

  1. #1
    Join Date
    Oct 2008
    Beans
    15

    BusyBox Error when installing Intrepid Ibex

    When I select "Install Ubuntu" from the disk, it hangs after a while (the loading bar freezes and it doesn't do anything). I tried the "try Ubuntu" option, after a while it went to BusyBox with some timeout errors. Any suggestions?

  2. #2
    Join Date
    Sep 2006
    Location
    California
    Beans
    1,325
    Distro
    Xubuntu

    Re: BusyBox Error when installing Intrepid Ibex

    Same here:
    Code:
    Loading, please wait...
    
    BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    (initramfs)
    And that's as far as it gets when I choose to try Ibex without installing. I've learned very well not to install until I'm certain my wifi is working. Any suggestions? Thanks.

    Here's my lspci:
    Code:
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11)
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
    00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
    00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
    00:08.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
    00:0a.0 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem
    01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000] (rev c1)
    “Men are born ignorant, not stupid. They are made stupid by education.” -- Bertrand Russell

  3. #3
    Join Date
    Jan 2007
    Beans
    153
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: BusyBox Error when installing Intrepid Ibex

    I keep getting BusyBox attempting to boot 8.10 i386 but I'm not sure what the error is. I also tried adding rootdelay=130 option, no difference. It is a SATA drive but I had the same issue with Kubuntu 8.10 RC on an IDE drive.

    EDIT: when I boot without quiet and splash the last thing written is something about [sda] Attached SCSI disk and then it goes to busybox. Should I just give up and resize the NTFS partition to take up full disk space?
    Last edited by the_darkside_986; October 31st, 2008 at 06:55 AM.

  4. #4
    Join Date
    Aug 2008
    Beans
    50
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: BusyBox Error when installing Intrepid Ibex

    Did you try adding irqpoll to the end of the kernel arguments? That's what fixed it for me (sata problem)

  5. #5
    Join Date
    Jan 2007
    Beans
    153
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: BusyBox Error when installing Intrepid Ibex

    I tried that but it didn't help. But this problem persisted before and after I installed a SATA instead of classic IDE drive.

  6. #6
    Join Date
    Jun 2008
    Location
    Maryland, U.S.A.
    Beans
    203

    Re: BusyBox Error when installing Intrepid Ibex

    Try pci=nomsi and see if that helps. I had that same issue with Hardy and my sata setup and thats what allowed me to install it. I also set to AHCI in bios. I did not need to do that after 8.04.1-iso was available. Here is the thread:
    http://ubuntuforums.org/showthread.php?t=912681
    I know we're talking Ibex but its worth a try.

    Good Luck
    fewjr

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •