I just did a fresh install of ubuntu hardy heron and previous installs had detected and showed my windows vista install on my /dev/sde1 This time however it didnt detect it and it is not showing up. I am curious if there is a way to edit my grub to alow me to boot back into my windows install.

Here is a "fdisk -l"


Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000c356f

Device Boot Start End Blocks Id System
/dev/sda1 * 1 9327 74919096 83 Linux
/dev/sda2 9328 9729 3229065 5 Extended
/dev/sda5 9328 9729 3229033+ 82 Linux swap / Solaris

Disk /dev/sdb: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x50255025

Device Boot Start End Blocks Id System

Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000053f5

Device Boot Start End Blocks Id System
/dev/sdc1 1 60801 488384001 83 Linux

Disk /dev/sdd: 300.0 GB, 300069052416 bytes
255 heads, 63 sectors/track, 36481 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000c9575

Device Boot Start End Blocks Id System
/dev/sdd1 * 1 35724 286952998+ 83 Linux
/dev/sdd2 35725 36481 6080602+ 5 Extended
/dev/sdd5 35725 36481 6080571 82 Linux swap / Solaris

Disk /dev/sde: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x44fdfe06

Device Boot Start End Blocks Id System
/dev/sde1 1 91201 732572001 c W95 FAT32 (LBA)

^^ My windows Vista HD

Here is my Menu.lst in grub.

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=cbdb7eef-02ea-4775-8d2a-fb523bf90d3d ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04, kernel 2.6.24-18-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=cbdb7eef-02ea-4775-8d2a-fb523bf90d3d ro quiet splash
initrd /boot/initrd.img-2.6.24-18-generic
quiet

title Ubuntu 8.04, kernel 2.6.24-18-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-18-generic root=UUID=cbdb7eef-02ea-4775-8d2a-fb523bf90d3d ro single
initrd /boot/initrd.img-2.6.24-18-generic

title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=cbdb7eef-02ea-4775-8d2a-fb523bf90d3d ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet

title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=cbdb7eef-02ea-4775-8d2a-fb523bf90d3d ro single
initrd /boot/initrd.img-2.6.24-16-generic

title Ubuntu 8.04, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST


# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdd1.
title Linux Mint, kernel 2.6.22-14-generic (on /dev/sdd1)
root (hd3,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=/dev/sdd1 ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdd1.
title Linux Mint, kernel 2.6.22-14-generic (recovery mode) (on /dev/sdd1)
root (hd3,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=/dev/sdd1 ro single
initrd /boot/initrd.img-2.6.22-14-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdd1.
title Linux Mint, kernel 2.6.20-16-generic (on /dev/sdd1)
root (hd3,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=/dev/sdd1 ro quiet splash
initrd /boot/initrd.img-2.6.20-16-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdd1.
title Linux Mint, kernel 2.6.20-16-generic (recovery mode) (on /dev/sdd1)
root (hd3,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=/dev/sdd1 ro single
initrd /boot/initrd.img-2.6.20-16-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdd1.
title Linux Mint, kernel memtest86+ (on /dev/sdd1)
root (hd3,0)
kernel /boot/memtest86+.bin
savedefault
boot


Does anyone know what i need to be adding to my Grub to make vista load again! Thanks.