I would like some information about this network card:
It's a wireless usb network card. I used this card with Ubuntu 10.04 and this night I upgraded to 12.04. Under 10.04 I used to compile the 2011_0427_RT3572_Linux_STA_v126.96.36.199.DPO driver each time the updates renewed the kernel. And then I run some script when i boot into the computer. that ran modprobe, wpa_supplicant and dhclient to get the device up and running. I got a bit tired and hoped that an upgrade to 12.04 would solve this driver issues. Unforunately this only made my problems worse, since the network-manager can't enumerate my eth0 device and I ve to run dhclient eth0 to get my network wired up and running.
ID 0df6:0062 Sitecom Europe B.V.
Als at boot time ubutu shows messages that it is trying to configure my networksettings and then wait another 60 seconds to do so, and the login screen appears.
Under 10.04 after modprobing the driver there also was a ra0 network device. And here eth0 is connected because I have run manually .
eth0 Link encap:Ethernet HWaddr 00:0f:1f:74:e1:be
inet addr:192.168.2.19 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20f:1fff:fe74:e1be/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3520 errors:0 dropped:0 overruns:0 frame:0
TX packets:2238 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:3009399 (3.0 MB) TX bytes:290107 (290.1 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:416 errors:0 dropped:0 overruns:0 frame:0
TX packets:416 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:32120 (32.1 KB) TX bytes:32120 (32.1 KB)
Does anyone know what might be wrong?
any help is most welcome