Now, I disabled xinerama and enabled composite, which should enable RandR and get all 3 screens working with compositing. Alas, it did not work. It defaulted back to classic, added a couple of panels, and now the left screen works, without compositing, and the center and right screen are white with panels, but when I right click them, they work like separate X screens.

Here is the xorg.conf for this setup:

Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Option "Xinerama" "0"
#	Option         "AIGLX" "true"
#	Option         "RenderAccel" "true"
	Option         "AllowGLXWithComposite" "true"
#	Option         "XGL" "true"
EndSection

Section "Module"
#	Load           "dbe"
#	Load           "extmod"
#	Load           "type1"
#	Load           "freetype"
	Load	       "glx"
	Load           "dri"
EndSection

Section "DRI"
    Mode 0666
EndSection

Section "Extensions"
	Option         "Composite" "enabled"
EndSection

############################################################################
############################# Monitors
##############################################################################

Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "20 Inch"
HorizSync 24.0 - 82.0
VertRefresh 48.0 - 76.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "HP"
ModelName "MidPuta"
HorizSync 24.0 - 82.0
VertRefresh 48.0 - 76.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Samsung"
ModelName "10 Inch"
HorizSync 24.0 - 82.0
VertRefresh 48.0 - 76.0
Option "DPMS"
EndSection

##########################################################################################
################################ Devices
############################################################################################3

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GT 240"
BusID "PCI:3:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GT 240"
BusID "PCI:3:0:0"
Screen 1
EndSection

Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "8600 GT"
BusID "PCI:6:0:0"
Screen 0
EndSection

#############################################################################
######################### Screens
############################################################################

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
Option         "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection


Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: nvidia-auto-select +0+0"
Option         "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
Option         "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection

and here is the log for this setup:

Code:
[    24.023] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    24.023] X Protocol Version 11, Revision 0
[    24.023] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[    24.023] Current Operating System: Linux TIFA 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64
[    24.023] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic root=UUID=cffe6d68-aaae-462f-9d3a-10f563f553d9 ro quiet splash vt.handoff=7
[    24.023] Build Date: 29 August 2012  12:12:33AM
[    24.023] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) 
[    24.023] Current version of pixman: 0.24.4
[    24.023] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    24.023] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.023] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 14 14:52:51 2012
[    24.023] (==) Using config file: "/etc/X11/xorg.conf"
[    24.023] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.024] (==) ServerLayout "Layout0"
[    24.024] (**) |-->Screen "Screen0" (0)
[    24.024] (**) |   |-->Monitor "Monitor0"
[    24.024] (**) |   |-->Device "Device0"
[    24.024] (**) |-->Screen "Screen1" (1)
[    24.024] (**) |   |-->Monitor "Monitor1"
[    24.024] (**) |   |-->Device "Device1"
[    24.024] (**) |-->Screen "Screen2" (2)
[    24.024] (**) |   |-->Monitor "Monitor2"
[    24.024] (**) |   |-->Device "Device2"
[    24.024] (**) Option "Xinerama" "0"
[    24.024] (==) Automatically adding devices
[    24.024] (==) Automatically enabling devices
[    24.024] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.024] 	Entry deleted from font path.
[    24.024] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    24.024] 	Entry deleted from font path.
[    24.024] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    24.024] 	Entry deleted from font path.
[    24.024] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    24.024] 	Entry deleted from font path.
[    24.024] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    24.024] 	Entry deleted from font path.
[    24.024] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    24.024] 	Entry deleted from font path.
[    24.024] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    24.024] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    24.024] (**) Extension "Composite" is enabled
[    24.024] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.024] (II) Loader magic: 0x7f91b9eefb00
[    24.024] (II) Module ABI versions:
[    24.024] 	X.Org ANSI C Emulation: 0.4
[    24.024] 	X.Org Video Driver: 11.0
[    24.024] 	X.Org XInput driver : 16.0
[    24.024] 	X.Org Server Extension : 6.0
[    24.025] (--) PCI:*(0:3:0:0) 10de:0ca3:196e:0789 rev 162, Mem @ 0xec000000/16777216, 0xb0000000/268435456, 0xce000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[    24.025] (--) PCI: (0:6:0:0) 10de:0402:196e:043a rev 161, Mem @ 0xea000000/16777216, 0x80000000/536870912, 0xe8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[    24.025] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.025] (II) "extmod" will be loaded by default.
[    24.025] (II) "dbe" will be loaded by default.
[    24.025] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    24.025] (II) "record" will be loaded by default.
[    24.025] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    24.025] (II) "dri2" will be loaded by default.
[    24.025] (II) LoadModule: "glx"
[    24.026] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    24.037] (II) Module glx: vendor="NVIDIA Corporation"
[    24.037] 	compiled for 4.0.2, module version = 1.0.0
[    24.037] 	Module class: X.Org Server Extension
[    24.037] (II) NVIDIA GLX Module  295.40  Thu Apr  5 21:57:38 PDT 2012
[    24.037] (II) Loading extension GLX
[    24.037] (II) LoadModule: "dri"
[    24.037] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    24.037] (II) Module dri: vendor="X.Org Foundation"
[    24.037] 	compiled for 1.11.3, module version = 1.0.0
[    24.037] 	ABI class: X.Org Server Extension, version 6.0
[    24.037] (II) Loading extension XFree86-DRI
[    24.037] (II) LoadModule: "extmod"
[    24.037] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    24.038] (II) Module extmod: vendor="X.Org Foundation"
[    24.038] 	compiled for 1.11.3, module version = 1.0.0
[    24.038] 	Module class: X.Org Server Extension
[    24.038] 	ABI class: X.Org Server Extension, version 6.0
[    24.038] (II) Loading extension MIT-SCREEN-SAVER
[    24.038] (II) Loading extension XFree86-VidModeExtension
[    24.038] (II) Loading extension XFree86-DGA
[    24.038] (II) Loading extension DPMS
[    24.038] (II) Loading extension XVideo
[    24.038] (II) Loading extension XVideo-MotionCompensation
[    24.038] (II) Loading extension X-Resource
[    24.038] (II) LoadModule: "dbe"
[    24.038] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    24.038] (II) Module dbe: vendor="X.Org Foundation"
[    24.038] 	compiled for 1.11.3, module version = 1.0.0
[    24.038] 	Module class: X.Org Server Extension
[    24.038] 	ABI class: X.Org Server Extension, version 6.0
[    24.038] (II) Loading extension DOUBLE-BUFFER
[    24.038] (II) LoadModule: "record"
[    24.038] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    24.038] (II) Module record: vendor="X.Org Foundation"
[    24.038] 	compiled for 1.11.3, module version = 1.13.0
[    24.038] 	Module class: X.Org Server Extension
[    24.038] 	ABI class: X.Org Server Extension, version 6.0
[    24.038] (II) Loading extension RECORD
[    24.038] (II) LoadModule: "dri2"
[    24.038] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    24.038] (II) Module dri2: vendor="X.Org Foundation"
[    24.038] 	compiled for 1.11.3, module version = 1.2.0
[    24.038] 	ABI class: X.Org Server Extension, version 6.0
[    24.038] (II) Loading extension DRI2
[    24.038] (II) LoadModule: "nvidia"
[    24.038] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    24.039] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.039] 	compiled for 4.0.2, module version = 1.0.0
[    24.039] 	Module class: X.Org Video Driver
[    24.039] (II) NVIDIA dlloader X Driver  295.40  Thu Apr  5 21:38:35 PDT 2012
[    24.039] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.039] (++) using VT number 7

[    24.039] (II) Loading sub module "fb"
[    24.039] (II) LoadModule: "fb"
[    24.039] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.039] (II) Module fb: vendor="X.Org Foundation"
[    24.039] 	compiled for 1.11.3, module version = 1.0.0
[    24.039] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.039] (II) Loading sub module "wfb"
[    24.039] (II) LoadModule: "wfb"
[    24.073] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.073] (II) Module wfb: vendor="X.Org Foundation"
[    24.073] 	compiled for 1.11.3, module version = 1.0.0
[    24.073] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.073] (II) Loading sub module "ramdac"
[    24.073] (II) LoadModule: "ramdac"
[    24.073] (II) Module "ramdac" already built-in
[    24.073] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    24.073] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.073] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.073] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    24.073] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.073] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.073] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    24.073] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.073] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.073] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    24.073] (==) NVIDIA(0): RGB weight 888
[    24.073] (==) NVIDIA(0): Default visual is TrueColor
[    24.073] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.073] (**) NVIDIA(0): Option "TwinView" "0"
[    24.073] (**) NVIDIA(0): Option "MetaModes" "DFP-1: nvidia-auto-select +0+0"
[    24.073] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
[    24.073] (**) NVIDIA(0): Enabling 2D acceleration
[    25.591] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[    25.608] (II) NVIDIA(GPU-0): Display (Acer X193W+ (DFP-1)) does not support NVIDIA 3D
[    25.608] (II) NVIDIA(GPU-0):     Vision stereo.
[    25.609] (II) NVIDIA(0): NVIDIA GPU GeForce GT 240 (GT215) at PCI:3:0:0 (GPU-0)
[    25.609] (--) NVIDIA(0): Memory: 1048576 kBytes
[    25.609] (--) NVIDIA(0): VideoBIOS: 70.15.20.00.51
[    25.609] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    25.609] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    25.611] (--) NVIDIA(0): Connected display device(s) on GeForce GT 240 at PCI:3:0:0
[    25.611] (--) NVIDIA(0):     CRT-1
[    25.612] (--) NVIDIA(0):     Acer X193W+ (DFP-1)
[    25.612] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    25.612] (--) NVIDIA(0): Acer X193W+ (DFP-1): 165.0 MHz maximum pixel clock
[    25.612] (--) NVIDIA(0): Acer X193W+ (DFP-1): Internal Single Link TMDS
[    25.612] (II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-1
[    25.612] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.612] (**) NVIDIA(0):     device Acer X193W+ (DFP-1) (Using EDID frequencies has
[    25.612] (**) NVIDIA(0):     been enabled on all display devices.)
[    25.668] (II) NVIDIA(0): Assigned Display Device: DFP-1
[    25.668] (II) NVIDIA(0): Validated modes:
[    25.668] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select+0+0"
[    25.668] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[    25.691] (--) NVIDIA(0): DPI set to (104, 102); computed from "UseEdidDpi" X config
[    25.691] (--) NVIDIA(0):     option
[    25.691] (**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    25.691] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[    25.691] (==) NVIDIA(1): RGB weight 888
[    25.691] (==) NVIDIA(1): Default visual is TrueColor
[    25.691] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[    25.691] (**) NVIDIA(1): Option "TwinView" "0"
[    25.691] (**) NVIDIA(1): Option "MetaModes" "CRT-1: nvidia-auto-select +0+0"
[    25.691] (**) NVIDIA(1): Option "AddARGBGLXVisuals" "True"
[    25.691] (II) NVIDIA(1): NVIDIA GPU GeForce GT 240 (GT215) at PCI:3:0:0 (GPU-0)
[    25.691] (--) NVIDIA(1): Memory: 1048576 kBytes
[    25.691] (--) NVIDIA(1): VideoBIOS: 70.15.20.00.51
[    25.691] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[    25.691] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[    25.693] (--) NVIDIA(1): Connected display device(s) on GeForce GT 240 at PCI:3:0:0
[    25.693] (--) NVIDIA(1):     CRT-1
[    25.693] (--) NVIDIA(1):     Acer X193W+ (DFP-1)
[    25.693] (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
[    25.693] (--) NVIDIA(1): Acer X193W+ (DFP-1): 165.0 MHz maximum pixel clock
[    25.693] (--) NVIDIA(1): Acer X193W+ (DFP-1): Internal Single Link TMDS
[    25.693] (II) NVIDIA(1): Display Device found referenced in MetaMode: CRT-1
[    25.693] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.693] (**) NVIDIA(1):     device CRT-1 (Using EDID frequencies has been enabled on
[    25.693] (**) NVIDIA(1):     all display devices.)
[    25.704] (II) NVIDIA(1): Assigned Display Device: CRT-1
[    25.704] (II) NVIDIA(1): Validated modes:
[    25.704] (II) NVIDIA(1):     "CRT-1:nvidia-auto-select+0+0"
[    25.704] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
[    25.706] (WW) NVIDIA(1): Unable to get display device CRT-1's EDID; cannot compute DPI
[    25.706] (WW) NVIDIA(1):     from CRT-1's EDID.
[    25.706] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
[    25.706] (**) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
[    25.706] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[    25.706] (==) NVIDIA(2): RGB weight 888
[    25.706] (==) NVIDIA(2): Default visual is TrueColor
[    25.706] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[    25.706] (**) NVIDIA(2): Option "TwinView" "0"
[    25.706] (**) NVIDIA(2): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
[    25.706] (**) NVIDIA(2): Option "AddARGBGLXVisuals" "True"
[    25.707] (**) NVIDIA(2): Enabling 2D acceleration
[    26.795] (II) NVIDIA(GPU-1): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    26.795] (II) NVIDIA(GPU-1):     3D Vision stereo.
[    26.800] (II) NVIDIA(2): NVIDIA GPU GeForce 8600 GT (G84) at PCI:6:0:0 (GPU-1)
[    26.800] (--) NVIDIA(2): Memory: 524288 kBytes
[    26.800] (--) NVIDIA(2): VideoBIOS: 60.84.34.00.51
[    26.800] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[    26.800] (--) NVIDIA(2): Interlaced video modes are supported on this GPU
[    26.804] (--) NVIDIA(2): Connected display device(s) on GeForce 8600 GT at PCI:6:0:0
[    26.804] (--) NVIDIA(2):     Samsung SyncMaster (DFP-0)
[    26.804] (--) NVIDIA(2): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[    26.804] (--) NVIDIA(2): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[    26.804] (II) NVIDIA(2): Display Device found referenced in MetaMode: DFP-0
[    26.804] (**) NVIDIA(2): Using HorizSync/VertRefresh ranges from the EDID for display
[    26.804] (**) NVIDIA(2):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[    26.804] (**) NVIDIA(2):     has been enabled on all display devices.)
[    26.862] (II) NVIDIA(2): Assigned Display Device: DFP-0
[    26.862] (II) NVIDIA(2): Validated modes:
[    26.862] (II) NVIDIA(2):     "DFP-0:nvidia-auto-select+0+0"
[    26.862] (II) NVIDIA(2): Virtual screen size determined to be 1440 x 900
[    26.870] (--) NVIDIA(2): DPI set to (89, 87); computed from "UseEdidDpi" X config
[    26.870] (--) NVIDIA(2):     option
[    26.870] (**) NVIDIA(2): Enabling 32-bit ARGB GLX visuals.
[    26.870] (--) Depth 24 pixmap format is 32 bpp
[    26.870] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    26.876] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select+0+0"
[    26.911] (II) Loading extension NV-GLX
[    26.945] (==) NVIDIA(0): Disabling shared memory pixmaps
[    26.945] (==) NVIDIA(0): Backing store disabled
[    26.945] (==) NVIDIA(0): Silken mouse enabled
[    26.946] (**) NVIDIA(0): DPMS enabled
[    26.946] (II) Loading extension NV-CONTROL
[    26.946] (II) Loading extension XINERAMA
[    26.946] (II) Loading sub module "dri2"
[    26.946] (II) LoadModule: "dri2"
[    26.946] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.946] (II) Module dri2: vendor="X.Org Foundation"
[    26.946] 	compiled for 1.11.3, module version = 1.2.0
[    26.946] 	ABI class: X.Org Server Extension, version 6.0
[    26.946] (II) NVIDIA(0): [DRI2] Setup complete
[    26.946] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    26.946] (==) RandR enabled
[    26.950] (II) NVIDIA(1): Setting mode "CRT-1:nvidia-auto-select+0+0"
[    27.141] (==) NVIDIA(1): Disabling shared memory pixmaps
[    27.141] (==) NVIDIA(1): Backing store disabled
[    27.141] (==) NVIDIA(1): Silken mouse enabled
[    27.141] (**) NVIDIA(1): DPMS enabled
[    27.142] (II) Loading sub module "dri2"
[    27.142] (II) LoadModule: "dri2"
[    27.142] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.142] (II) Module dri2: vendor="X.Org Foundation"
[    27.142] 	compiled for 1.11.3, module version = 1.2.0
[    27.142] 	ABI class: X.Org Server Extension, version 6.0
[    27.142] (II) NVIDIA(1): [DRI2] Setup complete
[    27.142] (II) NVIDIA(1): [DRI2]   VDPAU driver: nvidia
[    27.142] (==) RandR enabled
[    27.151] (II) NVIDIA(2): Setting mode "DFP-0:nvidia-auto-select+0+0"
[    27.253] (==) NVIDIA(2): Disabling shared memory pixmaps
[    27.253] (==) NVIDIA(2): Backing store disabled
[    27.253] (==) NVIDIA(2): Silken mouse enabled
[    27.253] (**) NVIDIA(2): DPMS enabled
[    27.253] (II) Loading sub module "dri2"
[    27.253] (II) LoadModule: "dri2"
[    27.253] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.253] (II) Module dri2: vendor="X.Org Foundation"
[    27.253] 	compiled for 1.11.3, module version = 1.2.0
[    27.253] 	ABI class: X.Org Server Extension, version 6.0
[    27.253] (II) NVIDIA(2): [DRI2] Setup complete
[    27.253] (II) NVIDIA(2): [DRI2]   VDPAU driver: nvidia
[    27.253] (==) RandR enabled
[    27.253] (II) Initializing built-in extension Generic Event Extension
[    27.253] (II) Initializing built-in extension SHAPE
[    27.253] (II) Initializing built-in extension MIT-SHM
[    27.253] (II) Initializing built-in extension XInputExtension
[    27.253] (II) Initializing built-in extension XTEST
[    27.253] (II) Initializing built-in extension BIG-REQUESTS
[    27.253] (II) Initializing built-in extension SYNC
[    27.253] (II) Initializing built-in extension XKEYBOARD
[    27.253] (II) Initializing built-in extension XC-MISC
[    27.253] (II) Initializing built-in extension SECURITY
[    27.253] (II) Initializing built-in extension XINERAMA
[    27.253] (II) Initializing built-in extension XFIXES
[    27.253] (II) Initializing built-in extension RENDER
[    27.253] (II) Initializing built-in extension RANDR
[    27.253] (II) Initializing built-in extension COMPOSITE
[    27.253] (II) Initializing built-in extension DAMAGE
[    27.254] (II) Initializing extension GLX
[    27.273] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    27.275] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    27.275] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.275] (II) LoadModule: "evdev"
[    27.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.276] (II) Module evdev: vendor="X.Org Foundation"
[    27.276] 	compiled for 1.11.3, module version = 2.7.0
[    27.276] 	Module class: X.Org XInput Driver
[    27.276] 	ABI class: X.Org XInput driver, version 16.0
[    27.276] (II) Using input driver 'evdev' for 'Power Button'
[    27.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.276] (**) Power Button: always reports core events
[    27.276] (**) evdev: Power Button: Device: "/dev/input/event1"
[    27.276] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.276] (--) evdev: Power Button: Found keys
[    27.276] (II) evdev: Power Button: Configuring as keyboard
[    27.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    27.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.276] (**) Option "xkb_rules" "evdev"
[    27.276] (**) Option "xkb_model" "pc105"
[    27.276] (**) Option "xkb_layout" "us"
[    27.276] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    27.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.276] (II) Using input driver 'evdev' for 'Power Button'
[    27.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.276] (**) Power Button: always reports core events
[    27.276] (**) evdev: Power Button: Device: "/dev/input/event0"
[    27.276] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.276] (--) evdev: Power Button: Found keys
[    27.276] (II) evdev: Power Button: Configuring as keyboard
[    27.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    27.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    27.276] (**) Option "xkb_rules" "evdev"
[    27.276] (**) Option "xkb_model" "pc105"
[    27.277] (**) Option "xkb_layout" "us"
[    27.277] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event4)
[    27.277] (II) No input driver specified, ignoring this device.
[    27.277] (II) This device may have been added with another device file.
[    27.277] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event5)
[    27.277] (II) No input driver specified, ignoring this device.
[    27.277] (II) This device may have been added with another device file.
[    27.277] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[    27.277] (II) No input driver specified, ignoring this device.
[    27.277] (II) This device may have been added with another device file.
[    27.277] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[    27.278] (II) No input driver specified, ignoring this device.
[    27.278] (II) This device may have been added with another device file.
[    27.278] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/event3)
[    27.278] (**) Logitech USB Trackball: Applying InputClass "evdev pointer catchall"
[    27.278] (II) Using input driver 'evdev' for 'Logitech USB Trackball'
[    27.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.278] (**) Logitech USB Trackball: always reports core events
[    27.278] (**) evdev: Logitech USB Trackball: Device: "/dev/input/event3"
[    27.278] (--) evdev: Logitech USB Trackball: Vendor 0x46d Product 0xc408
[    27.278] (--) evdev: Logitech USB Trackball: Found 9 mouse buttons
[    27.278] (--) evdev: Logitech USB Trackball: Found relative axes
[    27.278] (--) evdev: Logitech USB Trackball: Found x and y relative axes
[    27.278] (II) evdev: Logitech USB Trackball: Configuring as mouse
[    27.278] (**) evdev: Logitech USB Trackball: YAxisMapping: buttons 4 and 5
[    27.278] (**) evdev: Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.278] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-9/2-9:1.0/input/input3/event3"
[    27.278] (II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE, id 8)
[    27.278] (II) evdev: Logitech USB Trackball: initialized for relative axes.
[    27.278] (**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
[    27.278] (**) Logitech USB Trackball: (accel) acceleration profile 0
[    27.278] (**) Logitech USB Trackball: (accel) acceleration factor: 2.000
[    27.278] (**) Logitech USB Trackball: (accel) acceleration threshold: 4
[    27.278] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/mouse0)
[    27.278] (II) No input driver specified, ignoring this device.
[    27.278] (II) This device may have been added with another device file.
[    27.279] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    27.279] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.279] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.279] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.279] (**) AT Translated Set 2 keyboard: always reports core events
[    27.279] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    27.279] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.279] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.279] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.279] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    27.279] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    27.279] (**) Option "xkb_rules" "evdev"
[    27.279] (**) Option "xkb_model" "pc105"
[    27.279] (**) Option "xkb_layout" "us"
[    28.580] (II) NVIDIA(0): Setting mode "1680x1050_60_0"
[    36.444] (II) NVIDIA(1): Setting mode "CRT-1:nvidia-auto-select+0+0"
[    36.524] (II) NVIDIA(0): Setting mode "1024x768"
[    36.954] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm

Any ideas? lol