Boot Info Script 0.61 [1 April 2012]


============================= Boot Info Summary: ===============================

=> Windows is installed in the MBR of /dev/sda.

sda1: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD

sda2: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe /wubildr
/ubuntu/winboot/wubildr /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk

sda2/Wubi: __________________________________________________ ___________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda __________________________________________________ ___________________

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 312,578,047 312,371,200 7 NTFS / exFAT / HPFS


"blkid" output: __________________________________________________ ______________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/loop1 b0961dff-4944-4940-8ea4-2bcde83d93e6 ext4
/dev/sda1 FA845EBC845E7AD9 ntfs System Reserved
/dev/sda2 84C06827C06821A2 ntfs

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)


======================== sda2/Wubi/boot/grub/grub.cfg: =========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
true
}

insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root A4AAC4A2AAC471FA
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.38-13-generic" {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root A4AAC4A2AAC471FA
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.38-13-generic root=UUID=A4AAC4A2AAC471FA loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.38-13-generic
}
menuentry "Ubuntu, Linux 2.6.38-13-generic (recovery mode)" {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root A4AAC4A2AAC471FA
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.38-13-generic root=UUID=A4AAC4A2AAC471FA loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.38-13-generic
}
menuentry "Ubuntu, Linux 2.6.38-8-generic" {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root A4AAC4A2AAC471FA
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=A4AAC4A2AAC471FA loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, Linux 2.6.38-8-generic (recovery mode)" {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root A4AAC4A2AAC471FA
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=A4AAC4A2AAC471FA loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root A4AAC4A2AAC471FA
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

============================= sda2/Wubi/etc/fstab: =============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------

================= sda2/Wubi: Location of files loaded by Grub: =================

GiB - GB File Fragment(s)

4.205650330 = 4.515782656 boot/grub/grub.cfg 1
1.801311493 = 1.934143488 boot/initrd.img-2.6.38-13-generic 1
1.004428864 = 1.078497280 boot/initrd.img-2.6.38-8-generic 2
1.379234314 = 1.480941568 boot/vmlinuz-2.6.38-13-generic 1
12.132816315 = 13.027512320 boot/vmlinuz-2.6.38-8-generic 1
1.801311493 = 1.934143488 initrd.img 1
1.004428864 = 1.078497280 initrd.img.old 2
1.379234314 = 1.480941568 vmlinuz 1
12.132816315 = 13.027512320 vmlinuz.old 1