Results 1 to 3 of 3

Thread: Software Raid5 has fallen apart

Hybrid View

  1. #1
    Join Date
    Oct 2007

    Software Raid5 has fallen apart

    Hi guys, I recently set up a software raid5 on ubuntu server using mdadm. I have three 1tb drives raided up, sdb1 sdc1 and sdd1. This is a recent upgrade to my fileserver and while I was migrating my data over from my old drives I had them plugged into the box, naturally.

    Now I finished migrating my data across and unplugged my old drives and accidentally unplugged the sata cable for one of the raid drives, then booted up without realizing. The raid obviously did not rebuild itself and I quickly found out what went wrong. I've plugged the drive back in but now the raid will not go back together.

    I've tried:

    mdadm --atuo-detect /dev/sdb1 /dev/sdc1 /dev/sdd1
    but it says:

    could not bd_claim sdb1
    Please help? This is highly frustrating

  2. #2
    Join Date
    Oct 2007

    Re: Software Raid5 has fallen apart

    Some possibly useful information:

    Results of cat /proc/mdstat

    Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
    md0 : inactive sdc1[1]
          976759936 blocks
    md_d0 : inactive sdb1[0](S)
          976759936 blocks
    unused devices: <none>
    Results of dmesg tail

    [   70.978479] md: Autodetecting RAID arrays.
    [   70.978494] md: could not bd_claim sdb1.
    [   70.978994] md: Scanned 3 and added 2 devices.
    [   70.978997] md: autorun ...
    [   70.979000] md: considering sdc1 ...
    [   70.979010] md:  adding sdc1 ...
    [   70.979017] md:  adding sdd1 ...
    [   70.979022] md: created md0
    [   70.979025] md: bind<sdd1>
    [   70.979049] md: bind<sdc1>
    [   70.979065] md: running: <sdc1><sdd1>
    [   70.979080] md: kicking non-fresh sdd1 from array!
    [   70.979088] md: unbind<sdd1>
    [   70.979096] md: export_rdev(sdd1)
    [   71.064985] raid5: device sdc1 operational as raid disk 1
    [   71.065362] raid5: allocated 3228kB for md0
    [   71.065408] raid5: not enough operational devices for md0 (2/3 failed)
    [   71.065467] RAID5 conf printout:
    [   71.065469]  --- rd:3 wd:1
    [   71.065472]  disk 1, o:1, dev:sdc1
    [   71.065681] raid5: failed to run raid set md0
    [   71.065711] md: pers->run() failed ...
    [   71.065734] md: do_md_run() returned -5
    [   71.065736] md: md0 still in use.
    [   71.065739] md: ... autorun DONE.

  3. #3
    Join Date
    Jul 2009
    Ubuntu 9.10 Karmic Koala

    Re: Software Raid5 has fallen apart

    I,m not sure if this is your Problem, but in my fstab used the uuid= insted of /dev/sdb, due to moveing around the Drives Changes the /dev/sdX, and with the uuid it dosent matter what you do its being mounted with the drives id,
    probly the easy fix would be to put the old drives back in, now the fix im not sure about
    Last edited by buntunoob; November 11th, 2009 at 04:27 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts