Type: Posts; User: hvn2; Keyword(s):
When using a program with CD, the whole system suddenly froze. I could do nothing else but press the power and restart (and remove the cd). Now, My desktop is now empty except for trashbin,...
I'm not sure this is the correct forum, so if I'm wrong, please direct me.
I'm running 14.04armhf on a BeagleBoard Classic system and when running updates, I get the message
Due to bad parts, some of the data (inside a directory) on a harddisk seems no longer fully accessible. Strange is, that via a terminal using ls or cd the message "File or directory does not...
Ok, ty for this hint. I know dmesg, but didn't think of looking at it. Found the culprit. Some forumposts report a bad controller, but bad medium is most likely.
Ok, despite using fsck in maintenance-mode (fixed /dev/sda1) as well as gparted-live check and fix (seems to have fixed some left errors) there's no change: / partition still on ro instead of rw. I...
OK, this shows all mounts are rw, except for /dev/disk/by-uuid/<number> / ext4 ro,relatime,error=remount-ro, data=ordered 0 0
I compared this with another machine where it says rw, so I assume...
Yes, write errors, but I can't copy/paste them in here.
That is a good point. I do notice it does check the harddisk for errors on each (re)boot since this lock is going on. So this can indicate a...
Ok, forgot to mention that I am the owner of the files as well. And as said, neither chown nor chmod work anymore, neither as root nor as user.
I did check that, and that is as should be.
A laptop running 14.04 shows all icons with a lock. All permissions of the icons are for the user, but when the icons are clicked the message appears that there is no permission. Also, with...
Already running Lubuntu 12.04, so I figure that after the upgrade it will be Lubuntu again (or as well). Will try the 3.11 kernel, reboot and upgrade.
Ok, the 3.11 kernel is refused since it's not...
It has 500 MB RAM, dmesg shows graphics as radeon.
It's 1.4 GHz, so I figured it should be possible to install. Suggestion(s) ?
I want to upgrade a current non-pae Pentium M laptop to 14.04 and read https://help.ubuntu.com/community/EnablingPAE#Upgrading_to_14.04_on_Pentium_M_laptop. It mentions kernel 3.11, but that...
Thanks. That did it.
Running 12.04 LTS, I want to upgrade straight to 14.04 LTS. My settings are as such, but no upgrade is shown. When I change it to any new version, 12.10 is shown. Setting back to new LTS only,...
I created a custom kernel and after installing it using "sudo dpkg -i", I get the messages that uImage, uInitrd and boot.scr have been backed up and created. In /boot, initrd.img.old and...
I'm running Ubuntu 12.04 on both x86 and ARMv7 (armhf). I need to install Xenomai, and doing so from source (2.6.3) I downloaded it and acted according to...
Using armhf paltform, I went from 12.04 to 13.04 by clean install. On 12.04, I could easily use guvcview and it worked great. Now, when I want to start guvcview, I get loads of ALSA...
I have 3 partitions (boot, / and swap) of 4 GB total on a 8 GB USB stick and want to move them to a 4 GB flash card. I have read several posts that all use other methods, so my question is...
For a driver I have to cross-compile for Ubuntu12.04 ARM, I need the source of this kernel. Also, I found out that even the small difference between 3.2.0-32 and 3.2.0-54 stops a driver from...
OK, found the answer. Won't ever work unless a driver is built for the exact kernel.
I'm trying to build a hardware driver for Ubuntu12.04 ARM. For this I'm using a couple of tools coming with the hardware, but now I notice that 1 of the tools contains an especially prepared...
Ok, solved it. I had texinfo, but makeinfo wasn't found:
$ type makeinfo
bash: type: makeinfo: not found texinfo
/usr/bin is in my path. And, looking at the output of