Hi Favux and the_hornsby!
I tried with every possibility (xorg, fdi, etc, and combinations), and the touch is not working but interfering with the pen (and this is the annoying part), also in...
Type: Posts; User: katay666; Keyword(s):
Hi Favux and the_hornsby!
I tried with every possibility (xorg, fdi, etc, and combinations), and the touch is not working but interfering with the pen (and this is the annoying part), also in...
Very well!
I am also happy to test it, since the delay in the pen is disturbing...
Hi the_hornsby!
Try the following:
sudo setserial /dev/ttyS0 port 0x220 irq 4 autoconfig
and then
stty -F /dev/ttyS0
Sorry, I forgot the files... just unpack the archive.
Hi the_hornsby!
These are my settings. On kubuntu 9.10 everything works but the internal mic and the tablet.
For the mic I changed the last line of /etc/modprobe.d/alsa-base.conf to
options...
Hi Favux!
I followed your suggestion and I posted on linuxwacom-discuss.
I think you will see that there...
Actually I checked and also the t4410 have some problem similar to mine...
I wish to...
Hi Favux!
Yes, it is with wacom 0.8.5-9. I tried with 8.4.4, and then the tablet workd for a few seconds and then X11 crashes....
Ok, this is definitely strange...
I enclose 3 files for the different configurations:
fdi with 38400 baud
fdi+serial.conf
xorg.conf+serial.conf
for the files
lshal xinput Xorg.0.log
Now in...
Hi Favux!
The xsetwacom tells me that the device touch is not present, and I enclose the xinput and xsetwacom list.
If I use only the fdi, nothing works, and no deice is attached to /dev/tty0.
If...
Hi Favux!
Now the tablet pen works perfectly (both buttons).
I discovered why it is becoming sluggish: if I write with my hand touching the screen, then it slows down, otherwise it is perfectly...
Hi Favux!
Now I have the pen working (but the cursor follows the pen tip with some delay). I did the following:
stefano@Deimos:~$ setserial -G /dev/ttyS0
/dev/ttyS0 uart 16550A port 0x0220 irq...
Hi Favux!
I had an answer from the pen!
I looked at the file
stefano@Deimos:~$ more /sys/devices/pnp0/00\:0c/firmware_node/physical_node/resources
state = active
io 0x220-0x227
irq 4
Hi Favux!
Nothing works, xxd exits for all devices (ttyS0 to ttyS4)....
I have some questions:
lshal shows that the tablet exists/is mapped to something/what else?
/dev/ttyS* maps something/are...
Hi Favux!
I corrected the file /etc/setserial.conf, and after reading man setserial I copied the file also in /etc/serial.conf, but after reboot no answer from dmesg | grep ttyS and the pen on the...
Sorry for the mistake!
In any case also now I have
stefano@Deimos:~$ ls -l /etc/setserial.conf
-rw-r--r-- 1 root root 49 2010-01-25 18:50 /etc/setserial.conf
stefano@Deimos:~$ cat...
Hi Favux!
Thanks for your suggestions. This is what happens.
Both command
dmesg | grep ttyS
Hi Favux!
Unfortunately I have
stefano@Deimos:~/Programs/linuxwacom-0.8.5-9$ ls -l /usr/lib/xorg/modules/input/wacom_drv.so -l
-rw-r--r-- 1 root root 580337 2010-01-24 08:21...
Hi Favux,
I repeated the procedure (not erasing xserver-xorg-input-wacom) and get the following:
stefano@Deimos:~/Programs/linuxwacom-0.8.5-9$./configure --enable-wacom --prefix=/usr
.
.
.
Hi Favux!
I installed the last version, but probably I messed up thing in the installation (I followed your steps for installation) because I get still nothing.
Thanks for the quick answer!
Here is the file. My wife has a fujitsu t4210 and my siste an hp tx2500, and this is the first time I am in real trouble....
Hi!
I have a fujitsu t5010 dual digitalizer, and I followed the instructions in the how-to, and also tried with the gali98 270th post. But in all cases the result is that no wacom device appears in...