modprobe uinput
doesn't seem to do anything:(
Printable View
modprobe uinput
doesn't seem to do anything:(
It means it works as expected. Most command line applications don't output stuff unless things go wrong.Quote:
Originally Posted by arsonistarchitect
Ok im haveing the same problem and am useing a 3rd party xbox 360 controller called a "Pelican model #PL-3601" .. i tried the tread and did everything it still does not work in jscalibrator or my snes emulator games.. this is driving me crazy plz help!
here is the output
Code:lsusb
Bus 001 Device 005: ID 0e6f:0201
Bus 001 Device 003: ID 04d9:0499 Holtek Semiconductor, Inc.
Bus 001 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
when I run jscalibrator it does not find the "xpad" and when i try to calibrate it by manually typeing xpad into the top, it will not move. I uninstalled and reinstalled jscalibrator earlier as well.Code:$ sudo tail -fn0 /var/log/messages
Apr 11 18:12:16 jay-desktop kernel: [ 4159.967947] usb 1-4: USB disconnect, address 5
Apr 11 18:12:20 jay-desktop kernel: [ 4161.819893] usb 1-4: new full speed USB device using ohci_hcd and address 6
Apr 11 18:12:20 jay-desktop kernel: [ 4161.927615] usb 1-4: configuration #1 chosen from 1 choice
From a quick look it seems your controller is simply not recognized by the kernel module or the module isn't loaded (check lsmod output).Quote:
Originally Posted by thelastunavail
If the module is loaded and the controller still not recognized, please post the full output of "lsusb -v" or just the section that refers your to controller if you know how to find it.
You could also try the userspace Xbox pad driver:
* http://pingus.seul.org/~grumbel/xboxdrv/
here is the output for lsusb -v
I have tried a ton of different tut's but none seem to have worked..Code:Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 004: ID 0e6f:0201
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 8
idVendor 0x0e6f
idProduct 0x0201
bcdDevice 1.01
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 153
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 93
bInterfaceProtocol 1
iInterface 0
** UNRECOGNIZED: 11 21 10 01 01 25 81 14 03 03 03 04 13 02 08 03 03
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 93
bInterfaceProtocol 3
iInterface 0
** UNRECOGNIZED: 1b 21 00 01 01 01 83 40 01 04 20 16 85 00 00 00 00 00 00 16 05 00 00 00 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 64
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 93
bInterfaceProtocol 2
iInterface 0
** UNRECOGNIZED: 09 21 00 01 01 22 86 07 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 253
bInterfaceProtocol 19
iInterface 4
** UNRECOGNIZED: 06 41 00 01 01 03
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 003: ID 04d9:0499 Holtek Semiconductor, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04d9 Holtek Semiconductor, Inc.
idProduct 0x0499
bcdDevice 2.90
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
cannot read device status, Operation not permitted (1)
Bus 001 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04b8 Seiko Epson Corp.
idProduct 0x0005 Stylus Printer
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
I will check out that link now, thanks
Just checked, your gamepad isn't supported by the driver. So a little patch is required. You now have three option, any single one of them should work:Quote:
Originally Posted by thelastunavail
1) For the userspace driver xboxdrv I created the patch and commited it. So all you need to do is get the latest version from git and compile that (see README):
2) If you already have compiled an earlier xboxdrv release yourself without the patch, just start the driver with:Code:apt-get install \
libboost1.35-dev \
scons \
libusb-dev \
git-core \
libx11-dev \
x11proto-core-dev \
python-dbus
git clone git://github.com/Grumbel/xboxdrv.git
cd xboxdrv.git
scons
Which should work too, even without the patch.Code:xboxdrv --device-by-id 0e6f:0201 --type xbox360
3) If you want to use the kernels native xpad driver instead of xboxdrv, you have to recompile the kernel and patch the xpad.c file, you can find it in:
/usr/src/linux-source-2.6.27/drivers/input/joystick/xpad.c
It contains a simple list of devices into which you need to enter 0e6f:0201, its not a hard fix, but requires that you are familiar with kernel compilation.
Quote:
Originally Posted by Grumbel
I got all of the required things downloaded for the scons compile except for libboost1.35-dev, when i do sudo apt-get install libboost1.35-dev, i receive this error
and i get an error trying to scons it without that packageCode:desktop:~/xboxdrv$ sudo apt-get install libboost1.35-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package libboost1.35-dev
any ideas? Im useing Ubuntu hardy heron.. thanks! :-)
Try libboost-dev instead.Quote:
Originally Posted by thelastunavail
That did it! Thanks to the infinite power :)
It test twice to install this module. But at each compile process, I get these errors :Quote:
Originally Posted by po0f
Code:xpad360/xpad.c: In function ‘xpad_open’:
xpad360/xpad.c:340: error: ‘struct input_dev’ has no member named ‘private’
xpad360/xpad.c: In function ‘xpad_close’:
xpad360/xpad.c:351: error: ‘struct input_dev’ has no member named ‘private’
xpad360/xpad.c: In function ‘xpad_probe’:
xpad360/xpad.c:441: error: ‘struct input_dev’ has no member named ‘cdev’
xpad360/xpad.c:442: error: ‘struct input_dev’ has no member named ‘private’