And the login screen is ok?Quote:
I am having the same issue. The fix above allows me to get to the sign in screen but when I sign in it get the out of range message again. can some one help??
Do you only get an out-of-range message and the screen is ok or is your screen unusable after login?
I think your problem is different than the one of the people here.
Setting the resolution in /etc/default/grub only affects the grub menu.
To change the resolution in Ubuntu itself, try system->preferences->display first:
Or use xrandr:
Your problem might also be driver-related eventually.
If you can boot into safe graphics / VESA mode from a live CD correctly, it's most likely driver-related.
You can enable/disable proprietary drivers (if any are available) in "system->administration->restricted drivers manager":
Non-proprietary drivers come with the various xserver-xorg-video* packages. If you had/have no problems with previous versions of Ubuntu, you might be able to fix the problem by downgrading to older versions. But report a bug on launchpad about it in this case.
Tips to be able to use Ubuntu when having graphics problems:
- You can choose recovery mode from the grub menu to get command-line access to your system.
- If you missed the grub menu, you can still hit ctrl+alt+Fn (Fn=F1,F2,etc) to get a terminal.
- Boot into safe graphics mode from a Live-CD: https://help.ubuntu.com/community/Bo...Boot%20Options
- And there should be a way to force vesa mode by default, but I couldn't find anything except the xforcevesa option mentioned here:
i.e. either edit the GRUB2 line from the menu or edit the grub2 config files to make it permanent.
I am having this same problem. I have 10.10 installed do i update and then edit the grub BEFORE i reboot or what?
Linux newbie here sorry.
What do you mean by update? Upgrade from 10.10?
If you mean "sudo update-grub", then no, you first edit /etc/default/grub, then "sudo update-grub" and then when you reboot, the grub resolution should be ok.
Just follow the instructions here:
And obviously you have to reboot after that to see if it works.
As I said previously: This only solves resolution problems with GRUB, the boot menu, not with the login screen or after login.
How is one supposed to fix this if they can't see anything? I sent my daughter a nice PC with Natty loaded on it. It ran great here during load and test on a 1400x900 resolution. She recievd it and it worked great on a 1280x1024 resolution on a different LCD. Then all the sudden the monitor just displayed the same "monitor out of frequency" problem.
Before I had read this thread I had her disconnect the monitor and try another monitor between reboots. Then I sent her another monitor that supported a much broader frequencey range and still the same problem.
The biggest delimea for me is that she lives 2000 miles away and It is not possible to connect through VPN because she is in a rural area that does not support high speed internet with any reliancy.
So without being able to see the screen, how would she fix the problem?
All I can think of is reloading....
If the display problem is just with GRUB (i.e. the boot menu), she should be able to use Ubuntu normally after boot and fix the issue as specified earlier.
Otherwise, the problem is different and you should create another thread.
Also, the VGA mode (safe graphics mode) and recovery mode should still work I think.
Did the problem appear after an upgrade? In that case, downgrading the corresponding package (xserver something probably) might solve it and then you should report a bug at launchpad.
I'm having a different but related problem. I have Ubuntu 11.10 installed on an old Fujitsu Lifebook p2110. It was installed originally from an older version Minimal CD and upgraded in place.
The Lifebook has an 867mhz Transmeta CPU, 256MB RAM (of which the CPU grabs 16MB off the top for code morphing), and a 40GB UDMA 4 HD, multibooting Win2K Pro, Ubuntu, Puppy 4.31, and FreeDOS. Video is handled by an onboard ATI Rage Pro Mobility chipset with 8MB video RAM. Ubuntu properly recognizes the chipset's maximum 1280x768 resolution in 16bit color, and the GUI uses it.
The problem is character mode screens _not_ using the GUI. I get a screen that is black text on a white background, and the text is garbled and unreadable.
If I go into the grub menu entry at boot time, and manually specify the boot commands including "set GFXMODE=1280x768", I see the character mode screen I expect, and I can switch to another display using Ctrl-Alt-F1 or the like and have a usable character mode session.
I followed directions elsewhere to update /etc/default/grub to uncomment the GRUB_GFXMODE line, and set the resolution the 1280x768, then did an update-grub operation to regenerate the grub.cfg file. All appeared to work as expected, but when I rebooted and selected Ubuntu from the grub menu, I saw the same garbled character mode screen display I was trying to fix. It works manually changing the boot options form the grub menu, but fails when it does it automatically.
Am I missing something, or have I been bitten by an 11.10 bug?
Too Many Bugs with Ubuntu. Sure this fix gets rid of the black screen at login in, but the resolution on my system just goes berserk. everything is magnified, including the bootloader.