1 Attachment(s)
PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
Just installed the latest (18.10 LTS) on brand new desktop (see attached spec).
The problem is that the PC hangs after being up for a few hours.
Before rebooting I found many of the following errors
Code:
Sep 4 22:52:24 inges2 kernel: [11889.915252] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:24 inges2 kernel: [11889.915258] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:24 inges2 kernel: [11889.915263] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:27 inges2 kernel: [11893.127616] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:27 inges2 kernel: [11893.127626] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:27 inges2 kernel: [11893.127632] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:27 inges2 kernel: [11893.127636] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:33 inges2 kernel: [11899.060595] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:33 inges2 kernel: [11899.060605] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:33 inges2 kernel: [11899.060612] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:33 inges2 kernel: [11899.060617] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:35 inges2 kernel: [11900.898788] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:35 inges2 kernel: [11900.898798] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:35 inges2 kernel: [11900.898805] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:35 inges2 kernel: [11900.898809] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:36 inges2 kernel: [11901.824599] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:36 inges2 kernel: [11901.824608] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:36 inges2 kernel: [11901.824616] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:36 inges2 kernel: [11901.824620] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:37 inges2 kernel: [11903.241021] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:37 inges2 kernel: [11903.241032] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Receiver ID)
Sep 4 22:52:37 inges2 kernel: [11903.241039] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00000080/00006000
Sep 4 22:52:37 inges2 kernel: [11903.241043] pcieport 0000:00:01.2: [ 7] Bad DLLP
Sep 4 22:52:38 inges2 kernel: [11904.131122] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:38 inges2 kernel: [11904.131132] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:38 inges2 kernel: [11904.131139] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:38 inges2 kernel: [11904.131144] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:43 inges2 kernel: [11909.141886] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:43 inges2 kernel: [11909.141895] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:43 inges2 kernel: [11909.141902] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:43 inges2 kernel: [11909.141907] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:52:50 inges2 kernel: [11916.470504] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:52:50 inges2 kernel: [11916.470515] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:52:50 inges2 kernel: [11916.470521] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:52:50 inges2 kernel: [11916.470526] pcieport 0000:00:01.2: [12] Replay Timer Timeout
All seems to be on device [1022:15d3
After rebooting this device initially seems to be ok.
Code:
Sep 4 22:56:51 inges2 kernel: [ 0.080847] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
Sep 4 22:56:51 inges2 kernel: [ 0.080848] pci_bus 0000:00: root bus resource [bus 00-ff]
Sep 4 22:56:51 inges2 kernel: [ 0.080857] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
Sep 4 22:56:51 inges2 kernel: [ 0.080984] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
Sep 4 22:56:51 inges2 kernel: [ 0.081133] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
Sep 4 22:56:51 inges2 kernel: [ 0.081242] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
Sep 4 22:56:51 inges2 kernel: [ 0.081346] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
Sep 4 22:56:51 inges2 kernel: [ 0.081462] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
Sep 4 22:56:51 inges2 kernel: [ 0.081572] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
Sep 4 22:56:51 inges2 kernel: [ 0.081624] pci 0000:00:08.1: enabling Extended Tags
Sep 4 22:56:51 inges2 kernel: [ 0.081680] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
Sep 4 22:56:51 inges2 kernel: [ 0.081768] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
Sep 4 22:56:51 inges2 kernel: [ 0.081819] pci 0000:00:08.2: enabling Extended Tags
Sep 4 22:56:51 inges2 kernel: [ 0.081870] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
Sep 4 22:56:51 inges2 kernel: [ 0.081987] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
Sep 4 22:56:51 inges2 kernel: [ 0.082164] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
Until later
Code:
Sep 4 22:56:51 inges2 kernel: [ 0.808498] ehci-platform: EHCI generic platform driver
Sep 4 22:56:51 inges2 kernel: [ 0.808502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 4 22:56:51 inges2 kernel: [ 0.808503] ohci-pci: OHCI PCI platform driver
Sep 4 22:56:51 inges2 kernel: [ 0.808508] ohci-platform: OHCI generic platform driver
Sep 4 22:56:51 inges2 kernel: [ 0.808511] uhci_hcd: USB Universal Host Controller Interface driver
Sep 4 22:56:51 inges2 kernel: [ 0.808609] xhci_hcd 0000:15:00.0: xHCI Host Controller
Sep 4 22:56:51 inges2 kernel: [ 0.808613] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
Sep 4 22:56:51 inges2 kernel: [ 0.812499] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 0.812506] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:56:51 inges2 kernel: [ 0.812551] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:56:51 inges2 kernel: [ 0.812588] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:56:51 inges2 kernel: [ 0.812615] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 0.812627] pcieport 0000:15:00.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=1502(Transmitter ID)
Sep 4 22:56:51 inges2 kernel: [ 0.812666] pcieport 0000:15:00.2: device [1022:43c6] error status/mask=00003000/00002000
Sep 4 22:56:51 inges2 kernel: [ 0.812698] pcieport 0000:15:00.2: [12] Replay Timer Timeout
Sep 4 22:56:51 inges2 kernel: [ 0.838643] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 0.838650] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:56:51 inges2 kernel: [ 0.838698] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:56:51 inges2 kernel: [ 0.838736] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:56:51 inges2 kernel: [ 0.848299] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 0.848307] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Transmitter ID)
Sep 4 22:56:51 inges2 kernel: [ 0.848376] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00001000/00006000
Sep 4 22:56:51 inges2 kernel: [ 0.848429] pcieport 0000:00:01.2: [12] Replay Timer Timeout
Sep 4 22:56:51 inges2 kernel: [ 0.861603] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
Sep 4 22:56:51 inges2 kernel: [ 0.861793] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Sep 4 22:56:51 inges2 kernel: [ 0.861795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 4 22:56:51 inges2 kernel: [ 0.861796] usb usb1: Product: xHCI Host Controller
Code:
Sep 4 22:56:51 inges2 kernel: [ 3.397757] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 3.399429] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Receiver ID)
Sep 4 22:56:51 inges2 kernel: [ 3.400552] random: fast init done
Sep 4 22:56:51 inges2 kernel: [ 3.402018] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00000040/00006000
Sep 4 22:56:51 inges2 kernel: [ 3.403300] pcieport 0000:00:01.2: [ 6] Bad TLP
Sep 4 22:56:51 inges2 kernel: [ 3.403971] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Sep 4 22:56:51 inges2 kernel: [ 3.403980] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Sep 4 22:56:51 inges2 kernel: [ 3.403991] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Sep 4 22:56:51 inges2 kernel: [ 3.423125] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 3.424700] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Receiver ID)
Sep 4 22:56:51 inges2 kernel: [ 3.425928] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00000040/00006000
Sep 4 22:56:51 inges2 kernel: [ 3.427164] pcieport 0000:00:01.2: [ 6] Bad TLP
Sep 4 22:56:51 inges2 kernel: [ 3.428399] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 3.429631] pcieport 0000:15:00.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=1502(Transmitter ID)
Sep 4 22:56:51 inges2 kernel: [ 3.430691] pcieport 0000:15:00.2: device [1022:43c6] error status/mask=00001000/00002000
Sep 4 22:56:51 inges2 kernel: [ 3.431678] pcieport 0000:15:00.2: [12] Replay Timer Timeout
Sep 4 22:56:51 inges2 kernel: [ 3.436127] pcieport 0000:00:01.2: AER: Corrected error received: id=0008
Sep 4 22:56:51 inges2 kernel: [ 3.437103] pcieport 0000:00:01.2: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=000a(Receiver ID)
Sep 4 22:56:51 inges2 kernel: [ 3.438094] pcieport 0000:00:01.2: device [1022:15d3] error status/mask=00000040/00006000
Sep 4 22:56:51 inges2 kernel: [ 3.439081] pcieport 0000:00:01.2: [ 6] Bad TLP
I literally get hundreds of these, but not sure as to the cause (or fix)
Thanks
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
Since you say the desktop is brand-new, the errors are probably benign. Try appending `pci=nomsi` to the kernel command line to silence the error messages.
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
I will try this, but I don't think this is benign as it hangs the machine
2 Attachment(s)
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
Have added the suggested switch, but that really hangs the box. Maybe it's go something to do with the ecnrypted disk, but I don't get the prompt for the password when the grub command line looks like this (see attached fails.txt)
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=nomsi"
Without this it boots ok (see normal boot .txt)
1 Attachment(s)
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
Attached is the output of
Still logs a large amount of warnings and hangs the machine occasionally
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
Those error will happen when mounting a second disk the wrong way ... do you have multiple drives ?
If so, the solution involves editing your `/etc/fstab`
backup current file `sudo cp /etc/fstab /etc/fstab~prior.art`
show all partitions by issuing `sudo blkid`
partial output will look similar to
/dev/sdb7: LABEL="1810v01" UUID="61450f7b-44bf-429f-951e-6c8c17de5f43" TYPE="ext4" PARTUUID="2f0454ca-ed4a-4744-9c65-00b5a07a3741"
above is a partition on my second disk I want to auto mount on boot
IMPORTANT - take notice of value of UUID and TYPE
now I need to decide what full path I want that to get mounted to on my main drive ... let say I want `/media/aha/1810v01` so just create this now as it must exist prior to doing the mount
`sudo mkdir -p /media/aha`
`sudo chown aha:ahs /media/aha`
now as myself ( aha ) issue
`mkdir /media/aha/1810v01`
now add a new line at bottom of `/etc/fstab` to define the mount as per
`sudo vi /etc/fstab`
now add following line
`UUID=61450f7b-44bf-429f-951e-6c8c17de5f43 /media/aha/1810v01 ext4 defaults 0 0`
now just reboot and those errors will go away
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
Bug was gone (fixed, I think) in my PC today after installing new Kernel version "linux-image-4.15.0-50-generic" in Ubuntu 18.04.2 x86_64.
Re: PCIe Bus Error: severity=Corrected, type=Data Link Layer on new Desktop install
