Ubuntu 11.10 installation using Software raid having issues installing grub

Hello,

I am a linux newbie, but have used it here and there. I am attempting to build a media server using left over parts found around the office. I am using an OLD AMD Ahtlon 3000+ 64, 2 gb ram, and a micro atx board. I bought 2x2 terabyte drives and was hoping to create a raid setup and install Ubuntu.

I setup a mirror array in the raid controller bios but when using the standard Ubuntu 11.10 installer, it kept seeing both drives seperately instead of an array. Some googling suggested this silicon image controller is crap and uses drivers in Windows to act like a raid.

So I decided to try software raid in Linux instead. Researching I found I would need the "alternate" iso which I got and burned to a cd rom. I used the guide here https://help.ubuntu.com/10.04/server...tallation.html to setup the partitions.

Doing more reading and asking around, it seems as though the mbr/boot files cannot be written to a raid partition so I created a third partition at 50 MB for the boot. So each 2 TB drive has three partitions- boot, swap, and file. I raid the swap and file together and leave the 50 MB ext4 /boot alone. I also tried "biosgrub". On the ext I mounted it to /boot and flagged it as bootable. That does not show in the picture below.

However, as soon as I get to the step to install grub it fails. I have attached a picture of my partition setup and the error when installing Grub.

Can someone point me to where I have gone wrong?

grub failing for me too. read somewhere uninstalling grub-pc and installing old "grub" might fix it, but how do I do that? apt-get isn't available from the provided shell.

Since nobody else has taken a crack at this, I'll give it a shot. I've been running a RAID-based storage box for a couple of releases of Ubuntu, but that's about my only qualification. Caveat emptor

First thing I'm noticing from your second photo is that grub is trying to install on /dev/sdb. Is that your primary boot device?

Also, when setting up the partitions (first photo), you should choose either sda1 or sdb1, then select "Mount as" and choose "/boot".

Sorry I cannot help, but just wanted to say I have also spent more hours that I can count trying to do this with 11.10, with no luck.

There are many other forum posts, and launchpad bugs open to suggest we are not alone.
- --
Rod, UK

Do you have gpt or msdos partition table on your disks? The flag bios_grub is used only for gpt tables. For msdos you don't need to set any flag, maybe the standard boot flag because some board refuse to boot if there is no boot flag set. Otherwise linux doesn't need it and doesn't use it.

Try installing grub2 to the raid device itself, like /dev/mapper/stuff, not on a specific disk /dev/sda or /dev/sdb. Failing that, try /dev/sda and then /dev/sdb.

Usually I think it should be on the raid device, to allow booting if one disk fails. Imagine if installing on /dev/sdb worked and tomorrow that disk fails. Even though your raid1 array should work with one disk failed, how will it boot?
So you either have it on the array or on the MBR of both disks.

And the other comment is right, there doesn't seem to be a mount point /boot set for your boot partition.

PS. msdos tables work with up to 2TB disks, or so I've read. Since you have 2TB disks I would rather use msdos tables and not the new gpt system. The old way is proven. Especially if you don't have much experience with gpt (which I don't for example).

For me, with the partitioning shown in the attached image. I can at the end of the install take the option to install Grub to MBR, it selects and appears to install Grub to /sda and /sdb disks.
Install finishes without error, but on reboot, I just get:

error: no such disk.
grub rescue>

I have tried having a separate partition on both disks just for boot - sized 1mb. Same results.

Quote:

---

Boot Info Script 0.60 from 17 May 2011


============================= Boot Info Summary: ===============================

=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for on this drive.

sda1: __________________________________________________ ________________________

File system: linux_raid_member
Boot sector type: -
Boot sector info:

sda2: __________________________________________________ ________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________ ________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________ ________________________

File system: linux_raid_member
Boot sector type: -
Boot sector info:

sdb2: __________________________________________________ ________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sdb5: __________________________________________________ ________________________

File system: swap
Boot sector type: -
Boot sector info:

============================ Drive/Partition Info: =============================

Drive: sda __________________________________________________ ___________________

Disk /dev/sda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 101,562,367 101,560,320 fd Linux raid autodetect
/dev/sda2 101,564,414 117,229,567 15,665,154 5 Extended
/dev/sda5 101,564,416 117,229,567 15,665,152 fd Linux raid autodetect


Drive: sdb __________________________________________________ ___________________

Disk /dev/sdb: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdb1 * 2,048 101,562,367 101,560,320 fd Linux raid autodetect
/dev/sdb2 101,564,414 117,229,567 15,665,154 5 Extended
/dev/sdb5 101,564,416 117,229,567 15,665,152 fd Linux raid autodetect


"blkid" output: __________________________________________________ ______________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 df8884a1-5bb5-f114-2e2e-c5eb4259330f linux_raid_member RodsW510:0
/dev/sda5 e270d411-a627-48c1-8537-d34c379301e8 swap
/dev/sdb1 df8884a1-5bb5-f114-2e2e-c5eb4259330f linux_raid_member RodsW510:0
/dev/sdb5 a8dc2a96-5713-4a73-8e1d-dfd2606c8de4 swap

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)


========= Devices which don't seem to have a corresponding hard drive: =========

sdc sdd sde sdf sdg sdh sdi sdj

=============================== StdErr Messages: ===============================

unlzma: Decoder error
unlzma: Decoder error

---

Code:

---

ubuntu@ubuntu:~$ sudo fdisk -l

Disk /dev/sda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ba3d5

  Device Boot      Start        End      Blocks  Id  System
/dev/sda1  *        2048  101562367    50780160  fd  Linux raid autodetect
/dev/sda2      101564414  117229567    7832577    5  Extended
/dev/sda5      101564416  117229567    7832576  fd  Linux raid autodetect

Disk /dev/sdb: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002d56f

  Device Boot      Start        End      Blocks  Id  System
/dev/sdb1  *        2048  101562367    50780160  fd  Linux raid autodetect
/dev/sdb2      101564414  117229567    7832577    5  Extended
/dev/sdb5      101564416  117229567    7832576  fd  Linux raid autodetect
ubuntu@ubuntu:~$

---

- --
Rod, UK

@mardibloke
For RAID0 you need to have a separate /boot partition outside the array. As far as I know it can't work otherwise. I guess it has to do with raid0 writing the data half on one disk and half on the other and the boot files can't handle that.

So, in your place I would start all over, delete the current partitions shown on your image and create:
sda
512MB ext4 partition, mount point /boot
approx 52GB raid partition
8GB swap (no need to be in the raid, there are ways to use both together from the other disk, but you can configure it as raid0 too if you want)

sdb
512MB ext4 partition, no mount point (you can't have two /boot)
approx 52GB raid
8GB swap (raid or not, depended what you decided as above)

This should work out fine. The only thing I am not sure is whether you install the bootloader to the raid device /dev/mapper/etc or to /dev/sda. Try first /dev/sda since it's software raid not sure if the bios sees the /dev/mapper/etc.

Thanks will give that a try now.

- --
Rod, UK

Does screen shot match what you have explained?

sdb1 is not mounted.
- --
Rod, UK

Quote:

---

Originally Posted by mardibloke

Does screen shot match what you have explained?

sdb1 is not mounted.
- --
Rod, UK

---

Yeap. :)