Dual Monitors, output goes to both screens, no option to reposition
Dual Monitors not working with Koala.
Hi, Im a casual user running a dell vostro 1500, with Kubuntu 9.10, and don't have too much experience configuring xorg.conf
The system has never been able to identify my monitors properly, when trying to setup up with the GUI "Configure Display" The position drop downs are not present. (Also when clickng on identify outputs in the Configure Diplay settings, both monitors are identified as both VGA and LVDS1).
In 9.04, I got around this by running xrandr, and positioning the monitors myself.
Code:
xrandr --output LVDS --mode 1680x1050 --output VGA --right-of LVDS --mode 1680x1050
This no longer works in Koala... xrandr does nothing...
Can anyone help?
Much appreciated in advance.
Code:
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Code:
$ sudo cat /etc/X11/xorg.conf
[sudo] password for brendan:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Generic Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Identifier "Synaptics Touchpad"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
# Option "HorizEdgeScroll" "0"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Driver "wacom"
# Identifier "stylus"
# Option "Device" "/dev/input/wacom"
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Driver "wacom"
# Identifier "eraser"
# Option "Device" "/dev/input/wacom"
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
# Driver "wacom"
# Identifier "cursor"
# Option "Device" "/dev/input/wacom"
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
Section "Monitor"
Identifier "FP222W"
Option "DPMS"
HorizSync 30-84
VertRefresh 56-76
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Monitor "FP222W"
DefaultDepth 24
SubSection "Display"
Modes "1680x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
Depth 24
Virtual 3360 1050
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
# commented out by update-manager, HAL is now used
# InputDevice "Generic Keyboard"
# commented out by update-manager, HAL is now used
# InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
# commented out by update-manager, HAL is now used
# InputDevice "Synaptics Touchpad"
EndSection
Section "Device"
Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
Option "TexturedVideo" "Off"
EndSection
Section "ServerFlags"
Option "DontZap" "True"
EndSection
Re: Dual Monitors, output goes to both screens, no option to reposition
Okay.. does anybody at least know if xrandr or the intel xorg driver is no longer supported in 9.10??
thanks in advance...
Re: Dual Monitors, output goes to both screens, no option to reposition
Nevermind I resolved this.
Re: Dual Monitors, output goes to both screens, no option to reposition
Quote:
Originally Posted by
thordain
Nevermind I resolved this.
It might be nice if you were to share how you fixed it with the community you were asking for help from.
Go on, be a sport, let us know.
Re: Dual Monitors, output goes to both screens, no option to reposition
Quote:
Originally Posted by
SteveHillier
It might be nice if you were to share how you fixed it with the community you were asking for help from.
Go on, be a sport, let us know.
Hehheh... you are right of course.. so for the community who so promptly gave me help.. ;p
The problem was my outputs were renamed from VGA --> VGA1 and LVDS --> LVDS1 when I upgraded to karmic, and I didn't notice... :redface:
Re: Dual Monitors, output goes to both screens, no option to reposition
Good on ya thordain.
Thanks
