Compiz-Check -- no more "Desktop effects could not be enabled"

Compiz-Check is a script to test if Compiz is able to run on your system/setup and if not, it will tell you the reason why.

Additionally you can use the output of the script to look for support here, which will make it much easier to locate your problem.

To post the output here, use the forum's [CODE] tag (# button)

The test consists mainly of three parts:

1. List relevant system information
2. Run several Compiz related checks
3. Check for problematic hardware and problems with the setup in use.

So the output will eventually look like this:

Code:

---

Gathering information about your system...

 Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc RV350 AR [Radeon 9600]
 Driver in use:        radeon
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...              [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...              [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...          [ OK ]

---

If anything is OK like in this example, your system is most probably able to run Compiz.
In case anything fails, in most cases you will be prompted a reason and ideally a hint how to solve the problem.

Compiz-Check will not run Compiz for you, nor will it do any changes to your system (unless you specifically say so).


Get it here and follow the instructions how to use it: http://forlong.blogage.de/article/pages/Compiz-Check

You can find more about Compiz-Check and my original intention to write it here and here.

BUMP

This thread should be sticky.
;)

Extra BUMP .. cause this is a really good program.

Bump

Bump... definitely sticky material
(btw, nice blog forlong)

Thanks for this tool! I tried it when Compiz didn't work for me anymore, and it pointed out a problem (something about a composite manager already enabled in Gnome). After I let compiz-check fix it, I'm still not being able to run compiz. All the checks are returning fine, but compiz --replace will result in a 'aborting and using fallback: /usr/bin/metacity'. No furter errors are reported. Any ideas? I'm using the latest nvidia beta (173.08) on a 8800GT, which ran fine until yesterday.

Please post both the output of Compiz-Check and the one when running

Code:

---

compiz

---

in a terminal.

That's not going to be possible... Almost immediately after I posted this, I had a 'whatever'-moment and reinstalled Hardy. Since I was running on a system that was upgraded mulitple times I thought it was time for a cleanup. Now compiz works like a charm (using the restricted driver).

Oh, the output from compiz-check was exactly like your first post, only with some nvidia stuff (grahpics chip: Nvidia 8800GT (or something like it), driver: nvidia, render method: NVIDIA). Compiz kept going back to metacity; even 'compiz --help' resulted in the metacity help (...)

Hey Forlong are you planning on making a GUI version of Compiz-Check ??

Hm... what would be the benefit of that?
It's all about the output and that's just a bunch of text anyway.

I could use zenity/kdialog to show the output in a popup window but what difference would it make?

Quote:

---

./compiz-check

Gathering information about your system...

Distribution: Ubuntu 8.04
Desktop environment: GNOME
Graphics chip: nVidia Corporation C51 [Geforce 6150 Go] (rev a2)
Driver in use: nvidia
Rendering method: Nvidia

Checking if it's possible to run Compiz on your system...

Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [SKIP]

At least one check had to be skipped:
Error: Couldn't check the amount of memory on your Nvidia chip.

Would you like to know more? (Y/n) y

That does not mean, you won't be able to use Compiz.
If everything else went OK you are most probably fine.

In case you want the script to check this step as well, install the program
nvidia-settings on your system.

---

any clue about this chip?

Like "I" said in the script, you are most probably fine.
If you want the script to run that memory check as well, you have to install nvidia-settings:

Code:

---

sudo apt-get install nvidia-settings

---

Quote:

---

Originally Posted by Forlong

Hm... what would be the benefit of that?
It's all about the output and that's just a bunch of text anyway.

I could use zenity/kdialog to show the output in a popup window but what difference would it make?

---

Well your program will be more beneficial for new Linux users coming over to try out "those cool effects on YouTube" but they are tearing their hair out because they get the "desktop effects could not be enabled" message .. and they are still not comfortable with using the CLI.

Maybe something along the lines of this: http://i32.tinypic.com/2uzqk8z.gif

But I might be over analyzing it ... lol ... but still its a pretty significant and fantastic program !!! Also I love Compiz Switch !!

Have you read this? There are some bugs and workarounds....

http://ubuntuforums.org/showthread.php?t=773851

Quote:

---

Originally Posted by el-mar01

Well your program will be more beneficial for new Linux users coming over to try out "those cool effects on YouTube" but they are tearing their hair out because they get the "desktop effects could not be enabled" message .. and they are still not comfortable with using the CLI.

---

Well... look at it this way: even if there was a GUI, you'd still have to download the program, install it and finally run it somewhere.
What difference does it make, if that is via [Alt]+[F2] or in the terminal?

Quote:

---

Originally Posted by ozorba

Have you read this? There are some bugs and workarounds....

http://ubuntuforums.org/showthread.php?t=773851

---

In case you are referring to the ATI & Compiz part: I am the guy mentioned in the bugreport. So this is already covered by the script :)

Quote:

---

Originally Posted by Forlong

Well... look at it this way: even if there was a GUI, you'd still have to download the program, install it and finally run it somewhere.
What difference does it make, if that is via [Alt]+[F2] or in the terminal?

---

Oh I didn't know you could run it via Alt F2 .. thats handy thanks Forlong !!

Just what I have been looking for!
@admins: Please stickify this thread. I am sure that many users will find it useful. ;)

I didn't think I'd have to do it, but I need to ask about the output of the compiz-check. My compiz is not starting, I try to run xgl (have xorg-xgl installed), have fglrx working properly, and so on. I have an old system - since like 1.5 years ago I have been updating from one Ubuntu distro to another, and never reinstalled it fully, so I guess that maybe I'm getting some configuartion issues.
I'm on Dell Inspiron laptop with Mobility Radeon x1300, fglrx is working, direct rendering (checked by glxinfo |grep direct) too.

Ok, here is the output.

Code:

---

--------------------------
Gathering information about your system...

 Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc M52 [Mobility Radeon X1300]
 Driver in use:        fglrx
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...              [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...              [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...ls: nie ma dostępu do /etc/xdg:/home/wojciech/.local/etc/xdg/compiz: No such file or directory
          [WARN]

Something potential problematic has been detected with your setup:
 Warning: No path to Compiz found.

Would you like to know more? (Y/n) Y

 In case you did not compile Compiz manually, this will result in Compiz
 failing to run. The problem is presumably a result of you installing the
 proprietary fglrx driver manually or by script, which changed a certain
 config file to get itself on Compiz' whitelist.

-------------------------

---

thanks

PS. Oh, sorry, "nie ma dostępu" means "no access to" in Polish. May come in handy :)

PS2. Here's the output of my compiz --replace:

Code:

---

wojciech@inspiron:~$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 1002:7149 (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (4096): Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz: line 407: /usr/local/bin/compiz: No such file or directory

---

Hi airborne_rodent,

I have just uploaded a new minor release of Compiz-Check. Please download it again and post the output you get now.

gr8 one worth a million dollar for guys having problem with compiz

Woohooo, that's interesting.
As Furlong suggested, I ran it allagain, and here it comes:

Code:

---

wojciech@inspiron:~/programs$ ./compiz-check

Gathering information about your system...

 Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc M52 [Mobility Radeon X1300]
 Driver in use:        fglrx
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...              [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...              [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...          [ OK ]

---

And compiz --replace yields:

Code:

---

wojciech@inspiron:~/programs$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 1002:7149 (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (4096): Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz: line 407: /usr/local/bin/compiz: No such file or directory

---

Some time ago, I also tried to run Xgl by brutal-force, i.e. by linking... er.. what was it... I guess I linked /etc/X11/X to /usr/bin/Xgl like it was suggested in this antique post.
I know that its an anachronic way, but what a hell. If nothing else works.
Effect was such that (of what I could say by looking at cpu monitor) it rendered some compiz-ian effect through one of my cpu's cores. I mean I could see some shadows cast by the windows, but no cube, nor another compiz stuff.
Once more: I'm not sure if I said it before - about half a year ago, I guess it was the era of Gutsy, I had a working setup for compiz - I ran separate session with Xgl, chose it in gdm. But this stopped working when Hardy arrived.
I guess that if I reinstalled Hardy from scratch, I wouldn't have the problems, but I dont wanna.

Alright, the problem is, that /usr/bin/compiz doesn't detect the proper location of your compiz-manager file under /etc.

Here's how to work around it:

Code:

---

echo -e 'COMPIZ_BIN_PATH="/usr/bin/"\nPLUGIN_PATH="/usr/lib/compiz/"\nCOMPIZ_NAME="compiz.real"' >> $HOME/.config/compiz/compiz-manager

---

Afterwards (no need to restart), run

Code:

---

compiz

---

and I'm pretty sure it will work.


P.S. Reinstalling is never an option for real men (nor women). :D

Well. I enthusiastically share your opinion about not reinstalling :)
However, the trick you adviced didn't work.
I'm not sure if this (thus created) file 'compiz-manager' is read ad all, but all seems to act the same. Namely, when I run

Code:

---

compiz --replace

---

I get

Code:

---

wojciech@inspiron:~$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 1002:7149 (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (4096): Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz: line 407: /usr/bin/compiz.real: No such file or directory

---

... and well... hm... It doesn't say a thing about falling back to Metacity, and when I run fusion-icon (just to check out what window manager do I have) it says 'compiz'. However, I see no effects, nor can I get over the infamous "desktop effects could not be enabled".
So I guess im trapped in square one.

Many thanks, anyway. I guess you did massive work with compiz-check, it doesn't go without appreciation. :KS

Quote:

---

Originally Posted by airborne_rodent

I'm not sure if this (thus created) file 'compiz-manager' is read ad all

---

It is. Here's how I know:
First you had this error:

Code:

---

/usr/bin/compiz: line 407: /usr/local/bin/compiz: No such file or directory

---

And now this:

Code:

---

/usr/bin/compiz: line 407: /usr/bin/compiz.real: No such file or directory

---

I'm pretty confused to see that last error, though.
What's the output of

Code:

---

dpkg -l | grep compiz

---

Here it goes (pretty lot of stuff I've installed...):

Code:

---

wojciech@inspiron:~$ dpkg -l | grep compiz
ii  compiz                                    1:0.7.4-0ubuntu7                                  OpenGL window and compositing manager
ii  compiz-core                                1:0.7.4-0ubuntu7                                  OpenGL window and compositing manager
rc  compiz-extra                              0.3.6.1-0ubuntu2                                  extra third party plugins for compiz
ii  compiz-fusion-plugins-extra                0.7.4-0ubuntu1                                    Collection of extra plugins from OpenComposi
ii  compiz-fusion-plugins-main                0.7.4-0ubuntu5                                    Collection of plugins from OpenCompositing f
ii  compiz-gnome                              1:0.7.4-0ubuntu7                                  OpenGL window and compositing manager - GNOM
rc  compiz-gtk                                1:0.3.6-1ubuntu13                                  OpenGL window and compositing manager - Gtk
ii  compiz-plugins                            1:0.7.4-0ubuntu7                                  OpenGL window and compositing manager - plug
ii  compiz-switch                              0.4.3~ubuntu-1                                    Easily switch Compiz off and on
ii  compizconfig-backend-gconf                0.7.4-0ubuntu1                                    Settings library for plugins - OpenCompositi
ii  compizconfig-settings-manager              0.7.4-0ubuntu2                                    Compiz configuration settings manager
ii  emerald                                    0.7.2-0ubuntu2                                    Decorator for compiz-fusion
ii  libcompizconfig0                          0.7.4-0ubuntu1                                    Settings library for plugins - OpenCompositi
ii  libemeraldengine0                          0.7.2-0ubuntu2                                    Decoration engines for compiz-fusion
ii  python-compizconfig                        0.7.4-0ubuntu1                                    Compiz configuration system bindings

---

I see... go to System → Administration → Software Sources → Updates and disable Pre-released updates (then close).

Afterwards, run this to remove the current packages:

Code:

---

sudo apt-get remove --purge compiz compiz-core compiz-extra compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-gnome compiz-gtk compiz-plugins compizconfig-backend-gconf compizconfig-settings-manager emerald libcompizconfig0 libemeraldengine0 python-compizconfig

---

Then install the proper packages again:

Code:

---

sudo apt-get update && sudo apt-get install compiz emerald compizconfig-settings-manager

---

I did.
And like Elvis' ressurrection, rock'n roll started.
I mean - NOTHING WORKS :)

I still have

Quote:

---

Checking for Xgl: not present.
Found laptop using ati driver.
aborting and using fallback: /usr/bin/metacity

---

besides, I get the fantastic

Quote:

---

wojciech@inspiron:~/programs$ glxinfo |grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect

---

which is of course long-know goodbye fglrx-mess, I don't know where's my fglrx gone, but I'm sure as hell I didn't remove it.

I'll try to install it now again from synaptic/or Ati website,
can't wait the new mess I'm gonna get in :)

Oh, and by the way, I'm using 640x480 now, it's the only thing my gear does at the moment :)
Kind of reminds me the old Atari 64XE. If only I had JetSetWilly here...

:)

Just remove the driver (if present):

Code:

---

sudo apt-get purge xorg-driver-fglrx

---

Reboot, and the re-install it via System → Administration → Hardware Drivers

Let's not increase the possibility of failure any further :)


edit: in case anything fails, run compiz-check again and post the output.

It seems like it still runs on VESA, even though I did as you told (reinstalled the driver through system > ... ).
It now says the driver is 'turned on', and 'used'.
Which is strange, cause it clearly isn't.

my compiz-check says now what it should, i.e. :

Code:

---

wojciech@inspiron:~/programs$ ./compiz-check

Gathering information about your system...

 Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc M52 [Mobility Radeon X1300]
 Driver in use:        vesa
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...  [SKIP]

 Checking for hardware/setup problems..../compiz-check: line 378: [: /etc/xdg: oczekiwano operatora binarnego
          [FAIL]

There has been (at least) one error detected with your setup:
 Error: Detected driver is not on Compiz' whitelist.

Would you like to know more? (Y/n)

---

I hope I'm not interupting here, but I came across this wonderful script that tells me what's wrong with compiz and now I need to know what to do about it.

Code:

---

Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc RV350 AP [Radeon 9600]
 Driver in use:        fglrx
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...              [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...              [FAIL]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...          [FAIL]

There has been (at least) one error detected with your setup:
 Error: Fglrx driver not properly installed, you are using the Mesa driver.

---

How do I fix the FAIL issues?

To both of you: please post your /etc/X11/xorg.conf as well as your /var/log/Xorg.0.log -- and please keep in mind to use the forum's [code] tag (# button).

/etc/X11/xorg.conf

Code:

---

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    Fontpath    "/usr/share/X11/fonts/misc"
    Fontpath    "/usr/share/X11/fonts/cyrillic"
    Fontpath    "/usr/share/X11/fonts/100dpi/:unscaled"
    Fontpath    "/usr/share/X11/fonts/75dpi/:unscaled"
    Fontpath    "/usr/share/X11/fonts/Type1"
    Fontpath    "/usr/share/X11/fonts/100dpi"
    Fontpath    "/usr/share/X11/fonts/75dpi"
    Fontpath    "/usr/share/fonts/X11/misc"
    # path to defoma fonts
    Fontpath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load        "i2c"
    Load        "bitmap"
    Load        "ddc"
    Load        "dri"
    Load        "extmod"
    Load        "freetype"
    Load        "int10"
    Load        "type1"
    Load        "vbe"
    Load        "glx"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "us"
    Option        "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"    "/dev/input/mice"
    Option        "Protocol"    "ExplorerPS/2"
    Option        "ZAxisMapping"    "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "stylus"
    Option        "Device"    "/dev/wacom"# Change to
    Option        "Type"    "stylus"
    Option        "ForceDevice"    "ISDV4"# Tablet PC ONLY
    # /dev/input/event
    # for USB
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "eraser"
    Option        "Device"    "/dev/wacom"# Change to
    Option        "Type"    "eraser"
    Option        "ForceDevice"    "ISDV4"# Tablet PC ONLY
    # /dev/input/event
    # for USB
EndSection

Section "InputDevice"
    Driver        "wacom"
    Identifier    "cursor"
    Option        "Device"    "/dev/wacom"# Change to
    Option        "Type"    "cursor"
    Option        "ForceDevice"    "ISDV4"# Tablet PC ONLY
    # /dev/input/event
    # for USB
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
    Driver        "fglrx"
    Busid        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Generic Monitor"
    Option        "DPMS"
    Horizsync    28-51
    Vertrefresh    43-60
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
    Monitor        "Generic Monitor"
    Defaultdepth    24
    SubSection "Display"
        Depth    1
        Modes        "1024x768"    "800x600"    "640x480"
    EndSubSection
    SubSection "Display"
        Depth    4
        Modes        "1024x768"    "800x600"    "640x480"
    EndSubSection
    SubSection "Display"
        Depth    8
        Modes        "1024x768"    "800x600"    "640x480"
    EndSubSection
    SubSection "Display"
        Depth    15
        Modes        "1024x768"    "800x600"    "640x480"
    EndSubSection
    SubSection "Display"
        Depth    16
        Modes        "1024x768"    "800x600"    "640x480"
    EndSubSection
    SubSection "Display"
        Depth    24
        Modes        "1024x768"    "800x600"    "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
  screen "Default Screen"
    Inputdevice    "Generic Keyboard"
    Inputdevice    "Configured Mouse"
    Inputdevice    "stylus"    "SendCoreEvents"
    Inputdevice    "cursor"    "SendCoreEvents"
    Inputdevice    "eraser"    "SendCoreEvents"
EndSection

Section "DRI"
    Mode    0666
EndSection
Section "Extensions"
    Option        "Composite"    "0"
EndSection

---

/var/log/Xorg.0.log (as far back as my terminal would let me go)

Code:

---

(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI RADEON 9600 Series" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x107b, PciSubDevice = 0x3020)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xff7f0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9600 PRO
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.47.3
    ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 1:0.0.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0):  Display1: No EDID information from DDC.
(II) fglrx(0):  Display1: Failed to get EDID information.
(II) fglrx(0): Connected Display2: CRT on secondary DAC [crt2]
(II) fglrx(0): Display2 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: 29e  Serial#: 0
(II) fglrx(0): Year: 2006  Week: 45
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 102  vert.: 57
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330  greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060  whiteX: 0.312 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 138.5 MHz  Image Size:  1018 x 573 mm
(II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz  Image Size:  1018 x 573 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Monitor name: SAMSUNG
(II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):    00ffffffffffff004c2d9e0200000000
(II) fglrx(0):    2d100103686639782aee91a3544c9926
(II) fglrx(0):    0f5054afcf00a9408180614001010101
(II) fglrx(0):    0101010101011a3680a070381f403020
(II) fglrx(0):    3500fa3d3200001a302a009851002a40
(II) fglrx(0):    30701300fa3d3200001e000000fc0053
(II) fglrx(0):    414d53554e470a2020202020000000fd
(II) fglrx(0):    00384b1e500e000a20202020202000cc
(II) fglrx(0): End of Display2 EDID data --------------------
(WW) fglrx(0): More than one displays are connected,so clone mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Secondary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3.  1 power state available:
(II) fglrx(0):  1. 324/203MHz @ 50Hz [enable load balancing]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 14 modes found for primary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 0)
(**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0  36.00  800 824 896 1024  600 601 603 625 (35.2 kHz)
(**) fglrx(0):  Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"x47.0  29.60  800 816 896 992  600 601 604 635 interlace +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0  38.16  1024 1048 1152 1280  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0  31.48  848 864 952 1056  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0  32.66  720 744 816 912  576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(II) fglrx(0): Total of 25 modes found for secondary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 0)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0  78.75  1024 1040 1136 1312  768 769 772 800 (60.0 kHz)
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0  78.43  1024 1080 1192 1360  768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0  75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0  49.50  800 816 896 1056  600 601 604 625 (46.9 kHz)
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0  50.00  800 856 976 1040  600 637 643 666 (48.1 kHz)
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0  45.50  800 840 920 1040  600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0  36.00  800 824 896 1024  600 601 603 625 (35.2 kHz)
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0  31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0  31.50  640 664 704 832  480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0  38.16  1024 1048 1152 1280  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0  31.48  848 864 952 1056  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0  32.66  720 744 816 912  576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0  28.07  640 696 736 832  400 413 415 449 (33.7 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0  24.75  400 408 448 528  300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0  15.75  320 328 360 416  240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0  13.10  320 352 368 416  200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (1020, 570) mm
(--) fglrx(0): DPI set to (25, 34)
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0  78.75  1024 1040 1136 1312  768 769 772 800 (60.0 kHz)
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0  78.43  1024 1080 1192 1360  768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0  75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0  49.50  800 816 896 1056  600 601 604 625 (46.9 kHz)
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0  50.00  800 856 976 1040  600 637 643 666 (48.1 kHz)
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0  45.50  800 840 920 1040  600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): *Mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0  36.00  800 824 896 1024  600 601 603 625 (35.2 kHz)
(**) fglrx(0):  Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"x47.0  29.60  800 816 896 992  600 601 604 635 interlace +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0  31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0  31.50  640 664 704 832  480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): *Mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0  38.16  1024 1048 1152 1280  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0  31.48  848 864 952 1056  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0  32.66  720 744 816 912  576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0  28.07  640 696 736 832  400 413 415 449 (33.7 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0  24.75  400 408 448 528  300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0  15.75  320 328 360 416  240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0  13.10  320 352 368 416  200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.2.0
    ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pci] find AGP GART
(EE) fglrx(0): [agp] unable to acquire AGP, error -1023
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xff7f0000 - 0xff7fffff (0x10000) MX[b]
    [1] 0    0    0xe0000000 - 0xefffffff (0x10000000) MX[b]
    [2] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1    0    0xff9fe000 - 0xff9fefff (0x1000) MX[b]
    [7] -1    0    0xff9f8000 - 0xff9fbfff (0x4000) MX[b]
    [8] -1    0    0xff9ff800 - 0xff9fffff (0x800) MX[b]
    [9] -1    0    0xf6aff000 - 0xf6afffff (0x1000) MX[b]
    [10] -1    0    0xff8e0000 - 0xff8fffff (0x20000) MX[b]
    [11] -1    0    0x50000000 - 0x500003ff (0x400) MX[b]
    [12] -1    0    0xffaffc00 - 0xffafffff (0x400) MX[b]
    [13] -1    0    0xfecf0000 - 0xfecf0fff (0x1000) MX[b]
    [14] -1    0    0xf8000000 - 0xf7ffffff (0x0) MX[b]O
    [15] -1    0    0xf6afe000 - 0xf6afefff (0x1000) MX[b](B)
    [16] -1    0    0xff7e0000 - 0xff7effff (0x10000) MX[b](B)
    [17] -1    0    0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [18] -1    0    0xff7c0000 - 0xff7dffff (0x20000) MX[b](B)
    [19] -1    0    0xff7f0000 - 0xff7fffff (0x10000) MX[b](B)
    [20] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [21] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [22] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [23] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [24] 0    0    0x00009800 - 0x000098ff (0x100) IX[b]
    [25] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [26] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [27] -1    0    0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [28] -1    0    0x0000bc00 - 0x0000bc3f (0x40) IX[b]
    [29] -1    0    0x0000ac00 - 0x0000ac1f (0x20) IX[b]
    [30] -1    0    0x0000c800 - 0x0000c81f (0x20) IX[b]
    [31] -1    0    0x0000dc00 - 0x0000dc0f (0x10) IX[b]
    [32] -1    0    0x0000e000 - 0x0000e003 (0x4) IX[b]
    [33] -1    0    0x0000e400 - 0x0000e407 (0x8) IX[b]
    [34] -1    0    0x0000e800 - 0x0000e803 (0x4) IX[b]
    [35] -1    0    0x0000ec00 - 0x0000ec07 (0x8) IX[b]
    [36] -1    0    0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [37] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [38] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [39] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [40] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [41] -1    0    0x0000d800 - 0x0000d81f (0x20) IX[b]
    [42] -1    0    0x0000d400 - 0x0000d41f (0x20) IX[b]
    [43] -1    0    0x0000d000 - 0x0000d01f (0x20) IX[b]
    [44] -1    0    0x0000cc00 - 0x0000cc1f (0x20) IX[b]
    [45] -1    0    0x00009800 - 0x000098ff (0x100) IX[b](B)
    [46] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [47] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)            *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xe0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1024 x 7423
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) evaluating device (eraser)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) evaluating device (cursor)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) evaluating device (stylus)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
SetClientVersion: 0 9
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : Success
SetClientVersion: 0 9

---

Quote:

---

Originally Posted by GreenLantern33

Code:

---

(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)            *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

---

---

How did you install the fglrx driver?

Code:

---

sudo apt-get install xorg-driver-fglrx

---

Fix the first by changing "0" to "1" in xorg.conf's composite section.
Then the second will dissapear too, and you'll get to where I am (after, since last post, reinstalling ati's proprietary drivers), which is:

Code:

---

wojciech@inspiron:~/programs$ ./compiz-check

Gathering information about your system...

 Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc M52 [Mobility Radeon X1300]
 Driver in use:        fglrx
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...              [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...              [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...          [ OK ]

---

... and no compiz :)
My

Code:

---

compiz --replace

---

gives

Code:

---

wojciech@inspiron:~/programs$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 1002:7149 (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (4096): Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :0.0

---

Ok, I'm posting xorg rightaway...

GreenLantern33, you are most probably missing the proper kernel module (that's why you should always use System → Administration → Hardware Drivers).

Try this:

Code:

---

sudo apt-get install linux-restricted-modules-$(uname -r)

---

Afterwards, reboot and run compiz-check again.

Ok...

Code:

---


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
        Identifier        "Default Layout"
  screen 0 "aticonfig-Screen[0]" 0 0
        Inputdevice        "Generic Keyboard"
        Inputdevice        "Configured Mouse"
        Inputdevice        "stylus"        "SendCoreEvents"
        Inputdevice        "cursor"        "SendCoreEvents"
        Inputdevice        "eraser"        "SendCoreEvents"
        Inputdevice        "Synaptics Touchpad"
EndSection

Section "Files"
       
        # path to defoma fonts
        Fontpath        "/usr/share/X11/fonts/misc"
        Fontpath        "/usr/share/X11/fonts/cyrillic"
        Fontpath        "/usr/share/X11/fonts/100dpi/:unscaled"
        Fontpath        "/usr/share/X11/fonts/75dpi/:unscaled"
        Fontpath        "/usr/share/X11/fonts/Type1"
        Fontpath        "/usr/share/X11/fonts/100dpi"
        Fontpath        "/usr/share/X11/fonts/75dpi"
        Fontpath        "/usr/share/fonts/X11/misc"
        Fontpath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load                "i2c"
        Load                "bitmap"
        Load                "ddc"
        Load                "dri"
        Load                "extmod"
        Load                "freetype"
        Load                "glx"
        Load                "int10"
        Load                "type1"
        Load                "vbe"
EndSection

Section "InputDevice"
        Identifier        "Generic Keyboard"
        Driver                "kbd"
        Option                "CoreKeyboard"
        Option                "XkbRules"        "xorg"
        Option                "XkbModel"        "pc105"
        Option                "XkbLayout"        "pl"
        Option                "XkbOptions"        "lv3:ralt_switch"
EndSection

Section "InputDevice"
        Identifier        "Configured Mouse"
        Driver                "mouse"
        Option                "CorePointer"
        Option                "Device"        "/dev/input/mice"
        Option                "Protocol"        "ExplorerPS/2"
        Option                "ZAxisMapping"        "4 5"
        Option                "Emulate3Buttons"        "true"
EndSection

Section "InputDevice"
        Identifier        "Synaptics Touchpad"
        Driver                "synaptics"
        Option                "SendCoreEvents"        "true"
        Option                "Device"        "/dev/psaux"
        Option                "Protocol"        "auto-dev"
        Option                "HorizScrollDelta"        "1"
        Option                "SHMConfig"        "on"
EndSection

Section "InputDevice"
       
        # /dev/input/event
        # for USB
        Identifier        "stylus"
        Driver                "wacom"
        Option                "Device"        "/dev/wacom"# Change to
        Option                "Type"        "stylus"
        Option                "ForceDevice"        "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
       
        # /dev/input/event
        # for USB
        Identifier        "eraser"
        Driver                "wacom"
        Option                "Device"        "/dev/wacom"# Change to
        Option                "Type"        "eraser"
        Option                "ForceDevice"        "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
       
        # /dev/input/event
        # for USB
        Identifier        "cursor"
        Driver                "wacom"
        Option                "Device"        "/dev/wacom"# Change to
        Option                "Type"        "cursor"
        Option                "ForceDevice"        "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
        Identifier        "Generic Monitor"
        Option                "DPMS"
EndSection

Section "Monitor"
        Identifier        "aticonfig-Monitor[0]"
        Option                "VendorName"        "ATI Proprietary Driver"
        Option                "ModelName"        "Generic Autodetecting Monitor"
        Option                "DPMS"        "true"
EndSection

Section "Device"
        Identifier        "ATI Technologies, Inc. ATI Default Card"
        Driver                "fglrx"
        Busid                "PCI:1:0:0"
EndSection

Section "Device"
        Identifier        "aticonfig-Device[0]"
        Driver                "fglrx"
EndSection

Section "Screen"
        Identifier        "Default Screen"
        Device                "ATI Technologies, Inc. ATI Default Card"
        Monitor                "Generic Monitor"
        Defaultdepth        24
        SubSection "Display"
                Depth        1
                Modes                "1024x768"        "800x600"        "640x480"
        EndSubSection
        SubSection "Display"
                Depth        4
                Modes                "1024x768"        "800x600"        "640x480"
        EndSubSection
        SubSection "Display"
                Depth        8
                Modes                "1024x768"        "800x600"        "640x480"
        EndSubSection
        SubSection "Display"
                Depth        15
                Modes                "1024x768"        "800x600"        "640x480"
        EndSubSection
        SubSection "Display"
                Depth        16
                Modes                "1024x768"        "800x600"        "640x480"
        EndSubSection
        SubSection "Display"
                Depth        24
                Modes                "1024x768"        "800x600"        "640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier        "aticonfig-Screen[0]"
        Device                "aticonfig-Device[0]"
        Monitor                "aticonfig-Monitor[0]"
        Defaultdepth        24
        SubSection "Display"
                Viewport        0        0
                Depth        4
        EndSubSection
EndSection

Section "DRI"
        Mode        0666
EndSection

Section "Extensions"
        Option                "Composite"        "1"
EndSection

---

and log, hardcore...

Code:

---

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.1)
Current Operating System: Linux inspiron 2.6.24-17-generic #1 SMP Thu May 1 14:31:33 UTC 2008 i686
Build Date: 21 May 2008  12:19:32PM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun  3 15:09:58 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) |  |-->Monitor "aticonfig-Monitor[0]"
(**) |  |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(**) |-->Input Device "Synaptics Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
        Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType.
(**) FontPath set to:
        /usr/share/fonts/X11/misc,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/cyrillic,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81dc500
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 2.0
        X.Org XInput driver : 2.0
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1028,01bd rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 1028,01bd rev 01 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 01 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01bd rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1028,01bd rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1028,01bd rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e1 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1028,01bd rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1028,01bd rev 01 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1028,01bd rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,7149 card 1028,2003 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 14e4,170c card 1028,01af rev 02 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0832 card 1028,01bd rev 00 class 0c,00,10 hdr 80
(II) PCI: 03:01:1: chip 1180,0822 card 1028,01bd rev 19 class 08,05,01 hdr 80
(II) PCI: 03:01:2: chip 1180,0592 card 1028,01bd rev 0a class 08,80,00 hdr 80
(II) PCI: 03:01:3: chip 1180,0852 card 1028,01bd rev 05 class 08,80,00 hdr 80
(II) PCI: 0b:00:0: chip 14e4,4311 card 1028,0007 rev 01 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,12), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001a (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1        0        0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0xefd00000 - 0xefefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 11: bridge is at (0:28:0), (0,11,11), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 11 non-prefetchable memory range:
        [0] -1        0        0xefc00000 - 0xefcfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:3), (0,12,13), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 12 I/O range:
        [0] -1        0        0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 12 non-prefetchable memory range:
        [0] -1        0        0xefa00000 - 0xefbfffff (0x200000) MX[B]
(II) Bus 12 prefetchable memory range:
        [0] -1        0        0xe0000000 - 0xe01fffff (0x200000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
        [0] -1        0        0xef900000 - 0xef9fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc M52 [Mobility Radeon X1300] rev 0, Mem @ 0xd0000000/28, 0xefdf0000/16, I/O @ 0xee00/8
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1        0        0xefcfc000 - 0xefcfffff (0x4000) MX[B]
        [1] -1        0        0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
        [2] -1        0        0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
        [3] -1        0        0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
        [4] -1        0        0xef9fd800 - 0xef9fdfff (0x800) MX[B]
        [5] -1        0        0xef9fe000 - 0xef9fffff (0x2000) MX[B]
        [6] -1        0        0xffa80000 - 0xffa803ff (0x400) MX[B]
        [7] -1        0        0xefffc000 - 0xefffffff (0x4000) MX[B]
        [8] -1        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
        [9] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [10] -1        0        0x000010c0 - 0x000010df (0x20) IX[B]
        [11] -1        0        0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [12] -1        0        0x00000374 - 0x00000374 (0x1) IX[B]
        [13] -1        0        0x00000170 - 0x00000177 (0x8) IX[B]
        [14] -1        0        0x000003f4 - 0x000003f4 (0x1) IX[B]
        [15] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [16] -1        0        0x0000bf20 - 0x0000bf3f (0x20) IX[B]
        [17] -1        0        0x0000bf40 - 0x0000bf5f (0x20) IX[B]
        [18] -1        0        0x0000bf60 - 0x0000bf7f (0x20) IX[B]
        [19] -1        0        0x0000bf80 - 0x0000bf9f (0x20) IX[B]
        [20] -1        0        0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0xefcfc000 - 0xefcfffff (0x4000) MX[B]
        [1] -1        0        0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
        [2] -1        0        0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
        [3] -1        0        0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
        [4] -1        0        0xef9fd800 - 0xef9fdfff (0x800) MX[B]
        [5] -1        0        0xef9fe000 - 0xef9fffff (0x2000) MX[B]
        [6] -1        0        0xffa80000 - 0xffa803ff (0x400) MX[B]
        [7] -1        0        0xefffc000 - 0xefffffff (0x4000) MX[B]
        [8] -1        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
        [9] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [10] -1        0        0x000010c0 - 0x000010df (0x20) IX[B]
        [11] -1        0        0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [12] -1        0        0x00000374 - 0x00000374 (0x1) IX[B]
        [13] -1        0        0x00000170 - 0x00000177 (0x8) IX[B]
        [14] -1        0        0x000003f4 - 0x000003f4 (0x1) IX[B]
        [15] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [16] -1        0        0x0000bf20 - 0x0000bf3f (0x20) IX[B]
        [17] -1        0        0x0000bf40 - 0x0000bf5f (0x20) IX[B]
        [18] -1        0        0x0000bf60 - 0x0000bf7f (0x20) IX[B]
        [19] -1        0        0x0000bf80 - 0x0000bf9f (0x20) IX[B]
        [20] -1        0        0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0xefcfc000 - 0xefcfffff (0x4000) MX[B]
        [5] -1        0        0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
        [6] -1        0        0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
        [7] -1        0        0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
        [8] -1        0        0xef9fd800 - 0xef9fdfff (0x800) MX[B]
        [9] -1        0        0xef9fe000 - 0xef9fffff (0x2000) MX[B]
        [10] -1        0        0xffa80000 - 0xffa803ff (0x400) MX[B]
        [11] -1        0        0xefffc000 - 0xefffffff (0x4000) MX[B]
        [12] -1        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
        [13] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [14] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [15] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [16] -1        0        0x000010c0 - 0x000010df (0x20) IX[B]
        [17] -1        0        0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [18] -1        0        0x00000374 - 0x00000374 (0x1) IX[B]
        [19] -1        0        0x00000170 - 0x00000177 (0x8) IX[B]
        [20] -1        0        0x000003f4 - 0x000003f4 (0x1) IX[B]
        [21] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1        0        0x0000bf20 - 0x0000bf3f (0x20) IX[B]
        [23] -1        0        0x0000bf40 - 0x0000bf5f (0x20) IX[B]
        [24] -1        0        0x0000bf60 - 0x0000bf7f (0x20) IX[B]
        [25] -1        0        0x0000bf80 - 0x0000bf9f (0x20) IX[B]
        [26] -1        0        0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.4.0.90, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.1.0
        ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.49.7
        Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.4.0, module version = 1.2.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.4.0, module version = 1.2.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
        compiled for 4.3.99.902, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) Wacom driver level: 47-0.7.9-8 $
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
        compiled for 4.3.99.902, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.49.7
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.493.1                 
(II) ATI Proprietary Linux Driver Build Date: May 12 2008 11:03:20
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x7149) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0xefcfc000 - 0xefcfffff (0x4000) MX[B]
        [5] -1        0        0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
        [6] -1        0        0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
        [7] -1        0        0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
        [8] -1        0        0xef9fd800 - 0xef9fdfff (0x800) MX[B]
        [9] -1        0        0xef9fe000 - 0xef9fffff (0x2000) MX[B]
        [10] -1        0        0xffa80000 - 0xffa803ff (0x400) MX[B]
        [11] -1        0        0xefffc000 - 0xefffffff (0x4000) MX[B]
        [12] -1        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
        [13] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [14] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [15] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [16] -1        0        0x000010c0 - 0x000010df (0x20) IX[B]
        [17] -1        0        0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [18] -1        0        0x00000374 - 0x00000374 (0x1) IX[B]
        [19] -1        0        0x00000170 - 0x00000177 (0x8) IX[B]
        [20] -1        0        0x000003f4 - 0x000003f4 (0x1) IX[B]
        [21] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1        0        0x0000bf20 - 0x0000bf3f (0x20) IX[B]
        [23] -1        0        0x0000bf40 - 0x0000bf5f (0x20) IX[B]
        [24] -1        0        0x0000bf60 - 0x0000bf7f (0x20) IX[B]
        [25] -1        0        0x0000bf80 - 0x0000bf9f (0x20) IX[B]
        [26] -1        0        0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x820e9a0
(II) resource ranges after probing:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0xefcfc000 - 0xefcfffff (0x4000) MX[B]
        [5] -1        0        0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
        [6] -1        0        0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
        [7] -1        0        0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
        [8] -1        0        0xef9fd800 - 0xef9fdfff (0x800) MX[B]
        [9] -1        0        0xef9fe000 - 0xef9fffff (0x2000) MX[B]
        [10] -1        0        0xffa80000 - 0xffa803ff (0x400) MX[B]
        [11] -1        0        0xefffc000 - 0xefffffff (0x4000) MX[B]
        [12] -1        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
        [13] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [14] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B]
        [15] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [16] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B]
        [17] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [18] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [19] -1        0        0x000010c0 - 0x000010df (0x20) IX[B]
        [20] -1        0        0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [21] -1        0        0x00000374 - 0x00000374 (0x1) IX[B]
        [22] -1        0        0x00000170 - 0x00000177 (0x8) IX[B]
        [23] -1        0        0x000003f4 - 0x000003f4 (0x1) IX[B]
        [24] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [25] -1        0        0x0000bf20 - 0x0000bf3f (0x20) IX[B]
        [26] -1        0        0x0000bf40 - 0x0000bf5f (0x20) IX[B]
        [27] -1        0        0x0000bf60 - 0x0000bf7f (0x20) IX[B]
        [28] -1        0        0x0000bf80 - 0x0000bf9f (0x20) IX[B]
        [29] -1        0        0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
        [30] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B]
        [31] 0        0        0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 0.1.0
        ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(II) fglrx(0): Creating default Display subsection in Screen section
        "aticonfig-Screen[0]" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon X1300" (Chipset = 0x7149)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2003)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xefdf0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M52P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.49.7
        ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): VideoRAM: 65536 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO  Model: 1c74  Serial#: 0
(II) fglrx(0): Year: 2005  Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.600 redY: 0.350  greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.115  whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.1 MHz  Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 804  v_sync_end 808 v_blanking: 823 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 59.3 MHz  Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 804  v_sync_end 808 v_blanking: 823 v_border: 0
(II) fglrx(0):  FF059
(II) fglrx(0):  0AMWx¤Ěř


(II) fglrx(0): EDID (in hex):
(II) fglrx(0):        00ffffffffffff0006af741c00000000
(II) fglrx(0):        010f0103802115780aa7e599594f8c27
(II) fglrx(0):        1d505400000001010101010101010101
(II) fglrx(0):        010101010101c71b00a0502017301520
(II) fglrx(0):        44004bcf10000018261700a050201730
(II) fglrx(0):        152044004bcf10000000000000fe0046
(II) fglrx(0):        463035390042313534455731000000fe
(II) fglrx(0):        0030414d5778a4ccf801010a202000e9
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  5 power states available:
(II) fglrx(0):  1. 398/342MHz @ 60Hz [enable load balancing]
(II) fglrx(0):  2. 324/135MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(II) fglrx(0):  3. 209/252MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):  4. 392/252MHz @ 60Hz [enable sleep, thermal diode mode]
(II) fglrx(0):  5. 392/252MHz @ 60Hz [enable sleep]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 13 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0  71.11  1280 1301 1333 1440  800 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0  71.11  1280 1301 1333 1440  768 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x720": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0  71.11  1280 1301 1333 1440  720 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  71.11  1024 1301 1333 1440  768 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  71.11  800 1301 1333 1440  600 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  71.11  720 1301 1333 1440  480 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  71.11  640 1301 1333 1440  480 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "640x432": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0  71.11  640 1301 1333 1440  432 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  71.11  640 1301 1333 1440  400 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  71.11  512 1301 1333 1440  384 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0  71.11  400 1301 1333 1440  300 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0  71.11  320 1301 1333 1440  240 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0  71.11  320 1301 1333 1440  200 804 808 823 +hsync +vsync (49.4 kHz)
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (98, 96)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0  71.11  1280 1301 1333 1440  800 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0  71.11  1280 1301 1333 1440  768 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x720": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0  71.11  1280 1301 1333 1440  720 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  71.11  1024 1301 1333 1440  768 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  71.11  800 1301 1333 1440  600 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  71.11  720 1301 1333 1440  480 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  71.11  640 1301 1333 1440  480 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "640x432": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0  71.11  640 1301 1333 1440  432 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  71.11  640 1301 1333 1440  400 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  71.11  512 1301 1333 1440  384 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0  71.11  400 1301 1333 1440  300 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0  71.11  320 1301 1333 1440  240 804 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0  71.11  320 1301 1333 1440  200 804 808 823 +hsync +vsync (49.4 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.2.0
        ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B]
        [1] 0        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B]
        [2] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [3] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [4] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [5] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [6] -1        0        0xefcfc000 - 0xefcfffff (0x4000) MX[B]
        [7] -1        0        0xef9fd600 - 0xef9fd6ff (0x100) MX[B]
        [8] -1        0        0xef9fd500 - 0xef9fd5ff (0x100) MX[B]
        [9] -1        0        0xef9fd400 - 0xef9fd4ff (0x100) MX[B]
        [10] -1        0        0xef9fd800 - 0xef9fdfff (0x800) MX[B]
        [11] -1        0        0xef9fe000 - 0xef9fffff (0x2000) MX[B]
        [12] -1        0        0xffa80000 - 0xffa803ff (0x400) MX[B]
        [13] -1        0        0xefffc000 - 0xefffffff (0x4000) MX[B]
        [14] -1        0        0xefdf0000 - 0xefdfffff (0x10000) MX[B](B)
        [15] -1        0        0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [16] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
        [17] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
        [18] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
        [19] 0        0        0x0000ee00 - 0x0000eeff (0x100) IX[B]
        [20] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [21] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [22] -1        0        0x000010c0 - 0x000010df (0x20) IX[B]
        [23] -1        0        0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
        [24] -1        0        0x00000374 - 0x00000374 (0x1) IX[B]
        [25] -1        0        0x00000170 - 0x00000177 (0x8) IX[B]
        [26] -1        0        0x000003f4 - 0x000003f4 (0x1) IX[B]
        [27] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [28] -1        0        0x0000bf20 - 0x0000bf3f (0x20) IX[B]
        [29] -1        0        0x0000bf40 - 0x0000bf5f (0x20) IX[B]
        [30] -1        0        0x0000bf60 - 0x0000bf7f (0x20) IX[B]
        [31] -1        0        0x0000bf80 - 0x0000bf9f (0x20) IX[B]
        [32] -1        0        0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
        [33] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [34] 0        0        0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.90
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):    Name: fglrx
(II) fglrx(0):    Version: 8.49.7
(II) fglrx(0):    Date: May 12 2008
(II) fglrx(0):    Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):    Build-Kernel UTS_RELEASE:        2.6.24-17-generic
(II) fglrx(0):    Build-Kernel MODVERSIONS:        yes
(II) fglrx(0):    Build-Kernel __SMP__:            yes
(II) fglrx(0):    Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2480
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
        compiled for 7.1.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 16
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Solid Lines
        Dashed Lines
        Setting up tile and stipple cache:
                32 128x128 slots
                19 256x256 slots
                5 512x512 slots
(II) fglrx(0): Acceleration enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "pl"
(**) Generic Keyboard: XkbLayout: "pl"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
Atom 4, CARD32 4, unsigned long 4
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(**) Option "SHMConfig" "on"
(**) Option "HorizScrollDelta" "1"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) evaluating device (Synaptics Touchpad)
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) evaluating device (eraser)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) evaluating device (cursor)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) evaluating device (stylus)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : No such file or directory
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(--) Synaptics Touchpad touchpad found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Resource temporarily unavailable
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Resource temporarily unavailable
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
Receive 3D performance mode message with status: 00000001
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success

---

Quote:

---

Originally Posted by Forlong

Try this:

Code:

---

sudo apt-get install linux-restricted-modules-$(uname -r)

---

Afterwards, reboot and run compiz-check again.

---

Looks like I already have it installed

Code:

---

Reading package lists... Done
Building dependency tree     
Reading state information... Done
linux-restricted-modules-2.6.24-17-generic is already the newest version.
The following packages were automatically installed and are no longer required:
  libglitz-glx1 obex-data-server libglitz1 linux-headers-2.6.24-16-386
  linux-headers-2.6.24-16-generic linux-headers-2.6.24-16
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

---

Quote:

---

Originally Posted by airborne_rodent

Code:

---

Section "Screen"
 ...
        SubSection "Display"
                Viewport        0        0
                Depth        4
        EndSubSection
EndSection

---

---

Did you put that there?

Quote:

---

Originally Posted by GreenLantern33

Looks like I already have it installed

---

Then please remove fglrx

Code:

---

sudo apt-get purge xorg-driver-fglrx

---

Reboot, and the re-install it via System → Administration → Hardware Drivers

Quote:

---

Originally Posted by Forlong

Did you put that there?

---

Nope, never.

Alright, then run this:

Code:

---

sudo dpkg-reconfigure -phigh xserver-xorg

---

Afterwards, open your xorg.conf being root, e.g.

Code:

---

sudo gedit /etc/X11/xorg.conf

---

and add

Code:

---

        Driver      "fglrx"

---

to your Section "Device"

Additionally add this to the bottom of the file:

Code:

---

Section "Module"
        Load  "glx"
EndSection

---

Then save, reboot and try again.

Not good. I can't boot. I'm on my other computer now.

I am getting this over and over and over again.

Code:

---

serial8250: too much work for irq16

---

Quote:

---

Originally Posted by Forlong

Alright, then run this:

Code:

---

sudo dpkg-reconfigure -phigh xserver-xorg

---

Afterwards, open your xorg.conf being root, e.g.

Code:

---

sudo gedit /etc/X11/xorg.conf

---

and add

Code:

---

        Driver      "fglrx"

---

to your Section "Device"

Additionally add this to the bottom of the file:

Code:

---

Section "Module"
        Load  "glx"
EndSection

---

Then save, reboot and try again.

---

Did that, unfortunately, it turned back into Atari, i.e. fglrx stopped working, and 1024x768 turned on instead of 1280x800.
I copied my backup xorg.conf.2008... made by dpkg -reconfigure back onto xorg.conf to come back to where I was.
I prefer this setup right now - no compiz, but decent resolution and fglrx working instead of vesa (and that's what dpkg -reconfigure did).

Currently, I also noticed that I'm able to run compiz as root (i.e. sudo compiz --replace) turns compiz on (but 1. it's not a serious option 2. it comes with root's settings for compiz).

I'm sorry you two, this is nothing we can just solve along the way.

I think it's time that you start separate threads for that in a better fitting part of the forum, as those are clearly hardware/driver issues.

Sure, I think we did a lot anyways :)
Thanks!

I am a brand new Ubuntu user, installed yesterday. Today I'm trying to set up all the goodies that it offers and find myself quite lost. I ran the compiz-check (or rather tried to) it wouldn't run through what you all are posting here, instead I got this:

More than one graphics card detected -- sorry, the script can't handle that.
Aborting.

I for sure don't have more then one graphics card, am I not doing something correctly?

Yeah, I'm not satisfied with that either but I didn't have the possibility in mind, when writing the script.

As for your set up: you have most probably an on-board graphics chip and a graphics card in your computer.
You can disable your on-board chip in your BIOS setup.

Well I got it to run with the compiz command finally. Here's the outcome:

Checking for Xgl: not present.
Detected PCI ID for VGA: 00:01.0 0300: 8086:7125 (rev 03) (prog-if 00 [VGA controller])
01:0b.0 0300: 1002:4754 (rev 9a) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1024x768) to maximum 3D texture size (2048): Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :0.0

Quote:

---

Originally Posted by calicat

Well I got it to run with the compiz command finally.

---

What did you do?

Quote:

---

Originally Posted by Forlong

What did you do?

---

Lol, I dont have a clue. I restarted the system, installed an update and restarted again and volia. :) But I still can't get the extras to work, I just got the command to work

Quick question for anyone who can help me.

I've just installed Ubuntu yesterday, haha, total n00b, and all. But I've already got my dual head card running, the only problem is that, when i run compiz check, i get this.

Code:

---

Gathering information about your system...

 Distribution:          Ubuntu 8.04
 Desktop environment:  GNOME
 Graphics chip:        ATI Technologies Inc RV380 0x3e50 [Radeon X600]
 Driver in use:        fglrx
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...              [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...              [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...          [FAIL]

There has been (at least) one error detected with your setup:
 Error: Your current resolution is too high to run Compiz.

Would you like to know more? (Y/n) y

 Your resolution is 2560x1024 but the maximum 3D texture size that your
 graphics card is capable of is 2048x2048. Thus Compiz won't be able to run
 on this setup. You have to decrease the resolution first (in case you are
 using a dual-head setup, try disabling one monitor and run the script again).

---

I'm pretty sure my video card should be able to handle the "cube" and such. The cube's not really important to me, but yes I did see it on youtube, and i was intrigued, but i was interested in Linux before that. Mainly I miss the ability to drag left and right to move workspaces.

Please Help?

joshreluctant, I'm not really sure what your question is. Could you please rephrase it? :)

Hello All,

This is my first time posting and I am very new to Ubuntu. I am trying to use the amazing visual effects of Compiz-Fusion. However every time i attempt to change my visual effects settings in preferences I get a message saying "desktop effects could not be enabled". Please help. Here are the results of Compiz-Check.

Code:

Gathering information about your system...

Distribution: Ubuntu 8.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc RC410 [Radeon Xpress 200M]
Driver in use: fglrx
Rendering method: AIGLX

Checking if it's possible to run Compiz on your system...

Checking for texture_from_pixmap... [FAIL]
Checking for non power of two support... [FAIL]
Checking for composite extension... [ OK ]
Checking for FBConfig... [FAIL]
Checking for hardware/setup problems.../usr/bin/fglrxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
/usr/bin/fglrxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
./compiz-check: line 418: [: 800: unary operator expected
./compiz-check: line 418: [: 1280: unary operator expected
[ OK ]

At least one check had to be skipped:
Error: Unable to detect fglrx driver version in use.

You seem to have problems with both

Code:

---

fglrxinfo

---

and

Code:

---

glxinfo

---

please post both outputs, when running them in a terminal -- and use the forum's [CODE] tag please (# button)

Hi Forlong, and thanks for your script.

I tried to check my via driver. I know it doesn't work, but I wanted to try your script anyway.

Well... it just kills my X :D

When checking for texture_from_pixmap, boom, X dies before I can get any OK or FAIL.

Thought you'd like to know.

My glxinfo :

Code:

---

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample,
    GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
    GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: VIA Technology
OpenGL renderer string: Mesa DRI UniChrome (KM400) 20060710 x86/MMX+/3DNow!+/SSE
OpenGL version string: 1.2 Mesa 7.0.3-rc2
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_mirrored_repeat,
    GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_minmax,
    GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_histogram,
    GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
    GL_APPLE_packed_pixels, GL_IBM_rasterpos_clip,
    GL_IBM_texture_mirrored_repeat, GL_MESA_window_pos, GL_NV_blend_square,
    GL_NV_light_max_exponent, GL_NV_texgen_reflection, GL_OES_read_format,
    GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod

---

Interesting. The script doesn't do anything else but invoking glxinfo at that point of the script.
But you seem to run glxinfo just fine...

I know there are problems with the openchrome driver, that's why I'm skipping tests later on but you are the first having problems with the essential checks.

Can you please run this command (but close all running programs first ;))

Code:

---

LIBGL_ALWAYS_INDIRECT=1 glxinfo

---

to see if that's the problem?


Thanks for the feedback.

Thanx, here is the output of the two codes

Code:

---

fglrxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory

---

Code:

---

glxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory

---

Original Post

Hello All,

This is my first time posting and I am very new to Ubuntu. I am trying to use the amazing visual effects of Compiz-Fusion. However every time i attempt to change my visual effects settings in preferences I get a message saying "desktop effects could not be enabled". Please help. Here are the results of Compiz-Check.

Code:

Gathering information about your system...

Distribution: Ubuntu 8.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc RC410 [Radeon Xpress 200M]
Driver in use: fglrx
Rendering method: AIGLX

Checking if it's possible to run Compiz on your system...

Checking for texture_from_pixmap... [FAIL]
Checking for non power of two support... [FAIL]
Checking for composite extension... [ OK ]
Checking for FBConfig... [FAIL]
Checking for hardware/setup problems.../usr/bin/fglrxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
/usr/bin/fglrxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
./compiz-check: line 418: [: 800: unary operator expected
./compiz-check: line 418: [: 1280: unary operator expected
[ OK ]

At least one check had to be skipped:
Error: Unable to detect fglrx driver version in use.
Ajsplace is online now Report Post Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message Thanks
Ajsplace
View Public Profile
Send a private message to Ajsplace
Send email to Ajsplace
Find More Posts by Ajsplace
Add Ajsplace to Your Contacts
Old 7 Hours Ago #56
Forlong
Chocolate Ubuntu Mocha Blend

Forlong's Avatar

Join Date: Oct 2006
Location: Cologne, Europe
Posts: 1,887
Thanks: 0
Thanked 125 Times in 103 Posts

Re: Compiz-Check -- no more "Desktop effects could not be enabled"
You seem to have problems with both
Code:

fglrxinfo

and
Code:

glxinfo

Bumb:lolflag:

Ok well i did this and got this output........

------------------------------------------------------------------------
Gathering information about your system...

Distribution: Ubuntu 8.04
Desktop environment: GNOME
Graphics chip: nVidia Corporation Geforce 9600 GT 512mb (rev a1)
Driver in use: nv
Rendering method: None

Checking if it's possible to run Compiz on your system... [SKIP]

Checking for hardware/setup problems... [SKIP]

At least one check had to be skipped:
Error: No rendering method in use (AIGLX, Xgl or Nvidia)

----------------------------------------------------------------------
How do i render it so it works?

Quote:

---

Originally Posted by ryclegman

How do i render it so it works?

---

You need to install the nvidia driver through System → Administration → Hardware Drivers

Quote:

---

Originally Posted by Ajsplace

Code:

---

fglrxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory

---

Code:

---

glxinfo: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory

---

---

There's obviously something seriously wrong with your driver.
How did you install it?


P.S. you don't need to "quote" the previous posts here, it's not a mailing list. :)

Here's my compiz-check output:

Gathering information about your system...

Distribution: Ubuntu 8.04
Desktop environment: KDE
Graphics chip: ATI Technologies Inc Radeon R100 QD [Radeon 7200]
Driver in use: radeon
Rendering method: Xgl

Checking if it's possible to run Compiz on your system...

Checking for texture_from_pixmap... [SKIP]
Checking for non power of two support... [SKIP]
Checking for composite extension... [ OK ]
Checking for FBConfig... [SKIP]
Checking for hardware/setup problems... [SKIP]

Apparently my Radeon card is too old for the current fglrx driver. I don't see a hint of a driver installed when sudo lshw and lsmod makes no mention of fglrx or r200 but does show drm in a line with radeon. Would like to try the r200 driver haven't had success downloading it.

You don't need Xgl with the radeon driver.
Remove it:

Code:

---

sudo apt-get remove xserver-xgl

---

Then restart X and try again.


And yes, the 7200 is not supported by fglrx.


edit: was there no message, why the very last check had to be skipped?

Thanx alot Forlong. I will install the nvidia drivers. Can i just uninstall the other driver and start fresh. Can u tell me how to fix what ive done wrong and start over.

Ajsplace, you have an ATI card, you can't install the nvidia drivers.

How to remove the fglrx driver depends on how you installed it in the first place.

Oh ok, I was responding to message # 62 where it says that i need to install the nvidia drivers. Please bear with me. I just recently made the move over from windows.

How can i just unistall the drivers and restart fresh? I installed the ati drivers by downloading directly from site and from the repository. Im kind of lost now lol. What should i do?

Quote:

---

Originally Posted by Ajsplace

Oh ok, I was responding to message # 62 where it says that i need to install the nvidia drivers.

---

Oh, I see... I was responding to ryclegman there. Always have a look at the quote above the reply.

Quote:

---

Originally Posted by Ajsplace

How can i just unistall the drivers and restart fresh? I installed the ati drivers by downloading directly from site and from the repository. Im kind of lost now lol. What should i do?

---

Frankly, I'm not sure what's the best way to undo that.
Consider starting a thread in a better fitting section of the forum about how to uninstall a manual fglrx installation.

I just unistalled the fglrx. What should i do now to get my desktop effects to start working.

Please run Compiz-Check again and post the output here.

Hey Forlong, you said to post the results here so:

Gathering information about your system...

Distribution: Ubuntu 8.04
Desktop environment: GNOME
Graphics chip: nVidia Corporation GeForce 8600 GT (rev a1)
Driver in use: nvidia
Rendering method: Nvidia

Checking if it's possible to run Compiz on your system...

Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [SKIP]

At least one check had to be skipped:
Error: Could not check the amount of memory on your Nvidia chip.

The amount of memory in my Nvidia graphics card is 512MB (if it was understood with the chip).
And as for the installing of breezy... I just googled to find an answer so...


I ran the "compiz" command too in terminal and here's the result "if needed" :

don@don-desktop:~$ compiz
Checking for Xgl: not present.
Detected PCI ID for VGA: 02:00.0 0300: 10de:0402 (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1024x768) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
GConf backend: There is an unsupported value at path /apps/compiz/plugins/scale/allscreens/options/initiate_edge. Settings from this path won't be read. Try to remove that value so that operation can continue properly.

Well... I meant you should post it in your thread but nevermind.

You have definitely a Hardy install.
Can you pplease post the complete output of

Code:

---

cat /etc/apt/sources.list

---

and use the forum's [CODE] tag please (# button)

I'm in a bit of hurry and a bit messed up :confused: I'm returning to this tropic in a couple of hours... Here:

Code:

---

don@don-desktop:~$ cat /etc/apt/sources.list
deb http://ca.archive.ubuntu.com/ubuntu breezy universe
deb http://ca.archive.ubuntu.com/ubuntu breezy multiverse
deb-src http://ca.archive.ubuntu.com/ubuntu breezy universe
deb-src http://ca.archive.ubuntu.com/ubuntu breezy multiverse
deb http://security.ubuntu.com/ubuntu breezy-security universe
deb http://security.ubuntu.com/ubuntu breezy-security multiverse
deb-src http://security.ubuntu.com/ubuntu breezy-security universe
deb-src http://security.ubuntu.com/ubuntu breezy-security multiverse

---

OK... this is crazy.

Open the file in a text editor being root, e.g.

Code:

---

sudo gedit /etc/apt/sources.list

---

Then make sure to remove anything in there and replace it with this:

Code:

---

deb http://archive.ubuntu.com/ubuntu/ hardy main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu/ hardy main restricted universe multiverse

deb http://archive.ubuntu.com/ubuntu/ hardy-updates main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu/ hardy-updates main restricted universe multiverse

deb http://archive.ubuntu.com/ubuntu/ hardy-security main restricted universe multiverse
deb-src http://archive.ubuntu.com/ubuntu/ hardy-security main restricted universe multiverse

---

Then save and close the text editor.

Afterwards run this in a terminal:

Code:

---

sudo apt-get update

---

Code:

---

sudo apt-get upgrade

---

Code:

---

sudo apt-get install compizconfig-settings-manager

---

Thousand thanks my friend. I really appreciate your help because it was a bad start for me with ubuntu :mad:
Really thank you very much!