jfarrug
November 26th, 2008, 02:40 AM
I upgraded froom ver 8.03 to 8.10 and when i boot up i get the following messages
"Starting up
Loading please wait
Gave up waiting for root device. Common problems
-Boot args (cat/proc/cmdline)
-check root delay=(did the system wait long enough)
-check root=(did the system wait for the right device)
-Missing modules (cat/proc/modules; ls /dev)
Alert! dev/by-uuid/31223590-a35f-45aa-a913-29849aa47faf does not exist
Dropping to a shell
Busybox v1.10.2 (Ubuntu 1.10.2-/ubuntu6) built in shell (ash)
Enter help for a list of built in commands
(Initramfs) [ 33.584855] 8139 cp 0000:02:03.0 This
( id 10c:8139 rev 10) is not an 8139C+ compatible chip
[33.584911] 8139 cp 0000:02:03.0
try the "8139t00" drive instead
the system is halted with (initrammfs0 at the bottom.
If i then type in "Exit" the system loads with a ton of messages
I cannot figure out what is going on
"Starting up
Loading please wait
Gave up waiting for root device. Common problems
-Boot args (cat/proc/cmdline)
-check root delay=(did the system wait long enough)
-check root=(did the system wait for the right device)
-Missing modules (cat/proc/modules; ls /dev)
Alert! dev/by-uuid/31223590-a35f-45aa-a913-29849aa47faf does not exist
Dropping to a shell
Busybox v1.10.2 (Ubuntu 1.10.2-/ubuntu6) built in shell (ash)
Enter help for a list of built in commands
(Initramfs) [ 33.584855] 8139 cp 0000:02:03.0 This
( id 10c:8139 rev 10) is not an 8139C+ compatible chip
[33.584911] 8139 cp 0000:02:03.0
try the "8139t00" drive instead
the system is halted with (initrammfs0 at the bottom.
If i then type in "Exit" the system loads with a ton of messages
I cannot figure out what is going on