Installer does not recognize partitions

[_cvt_]

Hi,

I trying to install Kubuntu 8.10 and the installer does not recognize partitions.

I have 2 hds.

I have installed the kubuntu 8.04 but it broke.

sda2 - windows system
sda4 - data
sda5 - / (kubuntu 8.04)
sda6 - home (kubuntu 8.04)
sda7 - swap
sdb1 - data


Below some commands run in the live cd:

cat /etc/fstab

ubuntu@ubuntu:~$ cat /etc/fstab
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
/dev/sda7 swap swap defaults 0 0


sudo blkid

ubuntu@ubuntu:~$ sudo blkid
/dev/sda1: UUID="46CF-D6DD" TYPE="vfat"
/dev/sda2: UUID="98C8CB36C8CB1184" TYPE="ntfs"
/dev/sda4: UUID="00CCC1EACCC1DA54" LABEL="dados2" TYPE="ntfs"
/dev/sda5: LABEL="linux" UUID="3ddcfa8b-5809-4eb1-9d14-0acb2bdf4b49" TYPE="ext3"
/dev/sda6: LABEL="home_linux" UUID="3894f962-f9d1-4940-9c01-c08747736e69" TYPE="ext3"
/dev/sda7: TYPE="swap" UUID="ab3190b9-a454-4c8b-8d4b-7fbda74b46f3"
/dev/sdb1: UUID="CCC4B6F6C4B6E1BE" LABEL="dados" TYPE="ntfs"
/dev/loop0: TYPE="squashfs"

sudo fdisk -l

ubuntu@ubuntu:~$ sudo fdisk -l
omitting empty partition (5)

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x9af89af8

Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 193 5383 41696707+ 7 HPFS/NTFS
/dev/sda3 5384 12160 54436252+ f W95 Ext'd (LBA)
/dev/sda4 9300 12160 22980951 7 HPFS/NTFS
/dev/sda5 5384 7571 17575047 83 Linux
/dev/sda6 7572 9050 11880036 83 Linux
/dev/sda7 9051 9299 2000061 82 Linux swap / Solaris

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x5d379805

Device Boot Start End Blocks Id System
/dev/sdb1 1 14592 117210208+ 7 HPFS/NTFS


sudo lshw -C disk

ubuntu@ubuntu:~$ sudo lshw -C disk
*-disk:0
description: ATA Disk
product: Hitachi HTS54161
vendor: Hitachi
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: SBCO
serial: SB2304SHG30Y6E
size: 93GiB (100GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=9af89af8
*-disk:1
description: ATA Disk
product: TOSHIBA MK1234GS
vendor: Toshiba
physical id: 0.1.0
bus info: scsi@0:0.1.0
logical name: /dev/sdb
version: AH00
serial: Z66NF7K0S
size: 111GiB (120GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=5d379805
*-cdrom
description: DVD-RAM writer
product: DVDRAM GMA-4082N
vendor: HL-DT-ST
physical id: 1
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /cdrom
version: PT06
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,noatime state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /cdrom
configuration: mount.fstype=iso9660 mount.options=ro,noatime state=mounted


What I have to do to installer recognize my partitions ?

Thanks.

[pennacook]

From the livecd, does an fdisk -l show the partitions you show below?



1. sda2 - windows system
2. sda4 - data
3. sda5 - / (kubuntu 8.04)
4. sda6 - home (kubuntu 8.04)
5. sda7 - swap
6. sdb1 - data

[_cvt_]

Command sudo fdisk -l run-in in live cd add in the post.