Chuchaqui
November 18th, 2008, 02:51 AM
I have been trying to install Ubuntu 8.10 using the usb-creator tool on 8.10 but the drive isn't bootable. Every time I reboot and tell my computer to boot from the drive all that comes up is a semicolon (';') and nothing happens. When I then click a button (any button) my computer proceeds to boot normally, as though the drive wasn't plugged in to begin with. The flashdrive is a 'Kingston DataTravler 2.0'. I have tried running the usb-creator regularly ('$usb-creator') and in safe mode ('$usb-creator -s').
Installation Output:
####@##########:~$ usb-creator -s
-- Starting up at 20:40:32 --
[20:40:32] new device:
{'capacity': dbus.UInt64(999554560L), 'uuid': '722E-ED09', 'label': '', 'free': 997564416L, 'fstype': 'vfat', 'device': '/dev/sdb1', 'mountpoint': '/media/disk', 'udi': '/org/freedesktop/Hal/devices/volume_uuid_722E_ED09'}
[20:40:32] adding: /dev/sdb1
[20:40:42] mounting /home/rob/Torrents/ubuntu-8.10-desktop-i386.iso
[20:40:42] updating dest_status as part of update_row_state
[20:40:48] Installing...
[20:40:48] Source CD: /home/rob/Torrents/ubuntu-8.10-desktop-i386.iso
[20:40:48] Destination disk: /dev/sdb1
[20:40:48] Persistence size: 242 MB
[20:40:48] Marking partition 1 as active.
[20:40:48] installing the bootloader to /dev/sdb1.
[20:40:49] ['/usr/share/usb-creator/install.py', '-s', '/tmp/tmpPL9K0w/.', '-t', '/media/disk', '-p', '242']
[20:50:10] Unmounting source volume.
[20:50:11] Install command exited with code: 0
#####@############:~$
I've also tried using the USB on other computers with the same result.
I have also tried downloading new '.iso's and using those with the same result.
Installation Output:
####@##########:~$ usb-creator -s
-- Starting up at 20:40:32 --
[20:40:32] new device:
{'capacity': dbus.UInt64(999554560L), 'uuid': '722E-ED09', 'label': '', 'free': 997564416L, 'fstype': 'vfat', 'device': '/dev/sdb1', 'mountpoint': '/media/disk', 'udi': '/org/freedesktop/Hal/devices/volume_uuid_722E_ED09'}
[20:40:32] adding: /dev/sdb1
[20:40:42] mounting /home/rob/Torrents/ubuntu-8.10-desktop-i386.iso
[20:40:42] updating dest_status as part of update_row_state
[20:40:48] Installing...
[20:40:48] Source CD: /home/rob/Torrents/ubuntu-8.10-desktop-i386.iso
[20:40:48] Destination disk: /dev/sdb1
[20:40:48] Persistence size: 242 MB
[20:40:48] Marking partition 1 as active.
[20:40:48] installing the bootloader to /dev/sdb1.
[20:40:49] ['/usr/share/usb-creator/install.py', '-s', '/tmp/tmpPL9K0w/.', '-t', '/media/disk', '-p', '242']
[20:50:10] Unmounting source volume.
[20:50:11] Install command exited with code: 0
#####@############:~$
I've also tried using the USB on other computers with the same result.
I have also tried downloading new '.iso's and using those with the same result.