josh2112
November 15th, 2008, 11:48 PM
I am trying to install Kubuntu with a RAID1 array based on the excellent instructions at http://users.piuha.net/martti/comp/ubuntu/en/raid.html.
I have two 750 GB disks and I want to partition them like so:
20 GB - ext3 - root (mount point "/")
329 GB - ext3 - home (mount point "/home")
400 GB - xfs - mythtv recordings (mount point "/mythtv-recordings")
1 GB - swap
The first three partitions are going to be RAID1. The swap I don't care about, each disk can have it's own swap as far as I'm concerned.
I'm using Kubuntu 8.04.1 Alternate for amd64. I create the four partitions identically on each disk, marking the first 3 as "physical volume for RAID", and making sure the first partition on each disk is marked bootable. I then create the RAID arrays (interestingly enough, the installer RAIDed the first two partitions automatically for me but I had to create the xfs RAID array manually).
Everything looks fine, the install finishes, then when I reboot I'm presented with a GRUB error 17 - cannot mount the partition. I see that the GRUB entry the installer set up is setting the root to "/dev/md0". Setting it to "/dev/sda" doesn't help.
I've spent all day on this, tried it 2 different ways, done 4 different installs, and I'm still not getting anywhere. Why is this so hard? And what is the easiest way to accomplish what I want done? Would it be easier to just install the system on one disk, then make a RAID array later? And if so, how do I do that??
Thanks,
Josh
I have two 750 GB disks and I want to partition them like so:
20 GB - ext3 - root (mount point "/")
329 GB - ext3 - home (mount point "/home")
400 GB - xfs - mythtv recordings (mount point "/mythtv-recordings")
1 GB - swap
The first three partitions are going to be RAID1. The swap I don't care about, each disk can have it's own swap as far as I'm concerned.
I'm using Kubuntu 8.04.1 Alternate for amd64. I create the four partitions identically on each disk, marking the first 3 as "physical volume for RAID", and making sure the first partition on each disk is marked bootable. I then create the RAID arrays (interestingly enough, the installer RAIDed the first two partitions automatically for me but I had to create the xfs RAID array manually).
Everything looks fine, the install finishes, then when I reboot I'm presented with a GRUB error 17 - cannot mount the partition. I see that the GRUB entry the installer set up is setting the root to "/dev/md0". Setting it to "/dev/sda" doesn't help.
I've spent all day on this, tried it 2 different ways, done 4 different installs, and I'm still not getting anywhere. Why is this so hard? And what is the easiest way to accomplish what I want done? Would it be easier to just install the system on one disk, then make a RAID array later? And if so, how do I do that??
Thanks,
Josh