PDA

View Full Version : [ubuntu] Sony Ericsson W580i refuses to connect to Ibex through USB



Zachs Kappler
November 15th, 2008, 06:07 AM
After upgrading to Ubuntu 8.10 my Sony Ericsson phone while it's in file transfer mode. Unlike the other thread I saw about this model, mine will not show up at all. performing the dmesg | tail -30 command got me this:

[78784.237668] sd 2:0:0:0: [sdb] Write Protect is off
[78784.237684] sd 2:0:0:0: [sdb] Mode Sense: 00 46 94 00
[78784.237692] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[78784.237704] sdb:<3>ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
[78784.397697] ldm_validate_privheads(): Cannot find PRIVHEAD 1.
[78784.397711]
[82721.176800] usb 1-3.1: new full speed USB device using ehci_hcd and address 14
[82721.329988] usb 1-3.1: configuration #3 chosen from 1 choice
[82722.416258] cdc_acm 1-3.1:3.1: ttyACM0: USB ACM device
[82722.421594] cdc_acm 1-3.1:3.3: ttyACM1: USB ACM device
[82722.423126] cdc_wdm 1-3.1:3.7: cdc-wdm0: USB WDM device
[82722.424157] usbcore: registered new interface driver cdc_wdm
[82722.424465] usbcore: registered new interface driver cdc_acm
[82722.425855] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[82722.476334] usb0: register 'cdc_ether' at usb-0000:00:1d.7-3.1, CDC Ethernet Device, 02:80:37:0a:03:00
[82722.477070] usbcore: registered new interface driver cdc_ether
[82732.494135] usb 1-3.1: USB disconnect, address 14
[82732.510566] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, f3e51400/33e51400 (bad dma)
[82732.511630] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-3.1, CDC Ethernet Device
[82734.484447] usb 1-3.1: new full speed USB device using ehci_hcd and address 15
[82749.556362] usb 1-3.1: device descriptor read/64, error -110
[82764.732384] usb 1-3.1: device descriptor read/64, error -110
[82764.908396] usb 1-3.1: new full speed USB device using ehci_hcd and address 16
[82779.981570] usb 1-3.1: device descriptor read/64, error -110
[82795.156421] usb 1-3.1: device descriptor read/64, error -110
[82795.336155] usb 1-3.1: new full speed USB device using ehci_hcd and address 17
[82805.744125] usb 1-3.1: device not accepting address 17, error -110
[82805.816369] usb 1-3.1: new full speed USB device using ehci_hcd and address 18
[82816.224055] usb 1-3.1: device not accepting address 18, error -110
[82816.226361] hub 1-3:1.0: unable to enumerate USB device on port 1

I have several usb devices fed through a hub at the moment, but it will not work when it's the only usb device connected.

Interestingly, Ibex recognizes the modem function while in phone mode.

Zachs Kappler
November 15th, 2008, 06:17 AM
after disconnecting the whole hub and running dmesg | tail -30 i get:

[78784.237668] sd 2:0:0:0: [sdb] Write Protect is off
[78784.237684] sd 2:0:0:0: [sdb] Mode Sense: 00 46 94 00
[78784.237692] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[78784.237704] sdb:<3>ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
[78784.397697] ldm_validate_privheads(): Cannot find PRIVHEAD 1.
[78784.397711]
[82721.176800] usb 1-3.1: new full speed USB device using ehci_hcd and address 14
[82721.329988] usb 1-3.1: configuration #3 chosen from 1 choice
[82722.416258] cdc_acm 1-3.1:3.1: ttyACM0: USB ACM device
[82722.421594] cdc_acm 1-3.1:3.3: ttyACM1: USB ACM device
[82722.423126] cdc_wdm 1-3.1:3.7: cdc-wdm0: USB WDM device
[82722.424157] usbcore: registered new interface driver cdc_wdm
[82722.424465] usbcore: registered new interface driver cdc_acm
[82722.425855] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[82722.476334] usb0: register 'cdc_ether' at usb-0000:00:1d.7-3.1, CDC Ethernet Device, 02:80:37:0a:03:00
[82722.477070] usbcore: registered new interface driver cdc_ether
[82732.494135] usb 1-3.1: USB disconnect, address 14
[82732.510566] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, f3e51400/33e51400 (bad dma)
[82732.511630] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-3.1, CDC Ethernet Device
[82734.484447] usb 1-3.1: new full speed USB device using ehci_hcd and address 15
[82749.556362] usb 1-3.1: device descriptor read/64, error -110
[82764.732384] usb 1-3.1: device descriptor read/64, error -110
[82764.908396] usb 1-3.1: new full speed USB device using ehci_hcd and address 16
[82779.981570] usb 1-3.1: device descriptor read/64, error -110
[82795.156421] usb 1-3.1: device descriptor read/64, error -110
[82795.336155] usb 1-3.1: new full speed USB device using ehci_hcd and address 17
[82805.744125] usb 1-3.1: device not accepting address 17, error -110
[82805.816369] usb 1-3.1: new full speed USB device using ehci_hcd and address 18
[82816.224055] usb 1-3.1: device not accepting address 18, error -110
[82816.226361] hub 1-3:1.0: unable to enumerate USB device on port 1
daniel@WingFortress:~$ dmesg | tail -30
[83592.884750] attempt to access beyond end of device
[83592.884753] sdb: rw=0, want=1867767, limit=1867653
[83592.884756] attempt to access beyond end of device
[83592.884759] sdb: rw=0, want=1867768, limit=1867653
[83592.884763] attempt to access beyond end of device
[83592.884766] sdb: rw=0, want=1867769, limit=1867653
[83592.884769] attempt to access beyond end of device
[83592.884773] sdb: rw=0, want=1867770, limit=1867653
[83592.884776] attempt to access beyond end of device
[83592.884779] sdb: rw=0, want=1867771, limit=1867653
[83592.884788] attempt to access beyond end of device
[83592.884792] sdb: rw=0, want=1867772, limit=1867653
[83592.884795] attempt to access beyond end of device
[83592.884798] sdb: rw=0, want=1867773, limit=1867653
[83592.884802] attempt to access beyond end of device
[83592.884805] sdb: rw=0, want=1867774, limit=1867653
[83592.884809] attempt to access beyond end of device
[83592.884812] sdb: rw=0, want=1867775, limit=1867653
[83592.884815] attempt to access beyond end of device
[83592.884818] sdb: rw=0, want=1867776, limit=1867653
[83592.884827] attempt to access beyond end of device
[83592.884830] sdb: rw=0, want=1867772, limit=1867653
[83592.884833] attempt to access beyond end of device
[83592.884837] sdb: rw=0, want=1867773, limit=1867653
[83592.884840] attempt to access beyond end of device
[83592.884843] sdb: rw=0, want=1867774, limit=1867653
[83592.884847] attempt to access beyond end of device
[83592.884850] sdb: rw=0, want=1867775, limit=1867653
[83592.884853] attempt to access beyond end of device
[83592.884856] sdb: rw=0, want=1867776, limit=1867653

it brought up the icon for the memory card inside it but i would like to be able to use my external keyboard while working with it.

Zachs Kappler
February 10th, 2009, 09:43 PM
Ok, I have solved this now. It was the hub I have; it was making my phone read incorrectly. The hub is one of these: http://www.buzzillions.com/dz_448799_gigaware_usb_7_port_desktop_hub_reviews

I also learned this thing messes with TI calculators like my TI-84+!