zafirex
November 8th, 2008, 11:48 PM
Newbie here, so bear with me.
Setup: Dell Poweredge 1400sc Server
2 Pentium-III 1.13GHz Processors
Two 180GB Segate SCSI hard drives
Integrated Adaptec AIC-7899 Ultra3 SCSI controller
The two drives were setup for RAID1 under 6.06 LTS.
Tried doing the upgrade from 6.06 LTS to 8.10 LTS.
On reboot, I'm dropped to Busybox/initramfs with the following:
Check root=bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev
Reading all physical volumes...
ALERT! /dev/md0 does not exist
I'm guessing the RAID drives were not properly setup in the transfer.
Any ideas how to fix?
Setup: Dell Poweredge 1400sc Server
2 Pentium-III 1.13GHz Processors
Two 180GB Segate SCSI hard drives
Integrated Adaptec AIC-7899 Ultra3 SCSI controller
The two drives were setup for RAID1 under 6.06 LTS.
Tried doing the upgrade from 6.06 LTS to 8.10 LTS.
On reboot, I'm dropped to Busybox/initramfs with the following:
Check root=bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev
Reading all physical volumes...
ALERT! /dev/md0 does not exist
I'm guessing the RAID drives were not properly setup in the transfer.
Any ideas how to fix?