View Full Version : [ubuntu] Ubuntu 8.10 stuck at "Configuring network Interface"
November 2nd, 2008, 07:39 PM
I have upgraded from Ubuntu 8.04 to 8.10 today (via update manager, as described on the website) and everything seemed to work fine.
Until the system needed to reboot.
The boot process gets stuck at:
"Configuring network interfaces..."
On top of the "boot log" it says:
"Loading hardware drivers .... Fail"
All the other "checkpoints" seem to be fine since it puts an [OK] next to each one.
Apparently he does recognise the keyboard, because i can use it to type.
Pressin Ctrl+Alt+Del seems to drive on the boot process a little further but it gets stuck again at:
"1052.751899 pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature."
Please help! I am writing from another maching but I it is extremely important for me to get my Ubuntu PC working again, as I have a lot of non-backuped files on there.
November 3rd, 2008, 12:44 PM
FYI, same happens to me; if I do a Ctrl-Alt-Del, it continues booting, desktop is loaded, and everything seems to work right...so I'm not sure what's causing this, but at least in my case, everything goes well after the Ctrl-Alt-Del.
November 3rd, 2008, 01:06 PM
As a test:
type 'ESC' at the grub prompt and edit the second line in the boot prompt. (select the line and type E). Remove the 'quiet' option and insert
'noapic noquiet' (without quotes).
Type B to let the boot process continue.
November 3rd, 2008, 09:03 PM
Thanks for your replies Peter09 and Aroleto! I am a linux newbie and really appreciate your help.
Okay, I opened the grub menu (which I didn't know existed, so thanks again for showing me!) and edited the line as you said. Unfortunately it did not have any effect.
Next I tried booting with the following line (without editing):
Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
This time it said "Hardware drivers found" but got stuck on
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature
I pressed Ctrl+Alt+Del and a menu came up with "Resume Boot" and a few other options (clean, dpkg, fsck, root, xfix). So I ran a File System Check andnoerrors came up so I assume everything is fine.
After that I did Resume Boot and the same thing as above happened, i.e. no fail messages, but stuck on "pan0: Dropping NETIF_F_UFO... bla bla"
NOW THE GOOD NEWS.
I went back to the grub menu, and this time i tried booting with what looked like the "older" kernel:
Ubuntu 8.10, kernel 2.6.24-21-generic (recovery mode)
And tadaaaa! It booted straight to the desktop and everything worked perfectly.
I also checked the lsb-release file located in /etc and it says:
So I guess the upgrade from 8.04 to 8.10 did actually work! :p
Thus I have another question:
How do I make Ubuntu always automatically choose this "older" kernel at booting? In other words, how do I make this change in the boot sequence permanent?
Thank you for your time!
November 3rd, 2008, 10:25 PM
Here is the known bug.
November 3rd, 2008, 10:44 PM
Thanks for the link Peter.
I found a temporary solution to the problem.
I booted with the "stable" kernel from the grub menu.
Once on the desktop I did:
gksudo gedit /boot/grub/menu.lst
And I changed "default=0" (top of the page) to "default=2" because my working kernel was the third listed from the top (i.e. number 2 when counting from 0). This changed it to being the default boot kernel.
Now it boots normally :p YAY!
How important is it to use the "newest" kernel though? I hope there will be a fix for this soon...
Anyway, thanks 1000x for your assistance!
I think we can close the thread as "solved".
Powered by vBulletin® Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.