PDA

View Full Version : [ubuntu] Hardy not detecting secondary drive after new install



FMDragon
August 12th, 2008, 10:06 PM
So I've finally gotten around to upgrading to Hardy, now it won't detect either of the secondary drives I have installed. Currently I have Hardy installed on one 80gb drive, two secondary hard drives (200gb and 40gb) for media etc., and my DVD burner. Could anyone tell me how I can mount the two secondary drives? Thanks.

__________________________________________________ ______________________

FDISK PRINT-OUT

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xea551219

Device Boot Start End Blocks Id System
/dev/sda1 * 1 9327 74919096 83 Linux
/dev/sda2 9328 9729 3229065 5 Extended
/dev/sda5 9328 9729 3229033+ 82 Linux swap / Solaris

Disk /dev/sdb: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00028e56

Device Boot Start End Blocks Id System
/dev/sdb1 1 24322 195358720 7 HPFS/NTFS

Disk /dev/sdc: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x899c899c

Device Boot Start End Blocks Id System
/dev/sdc1 1 4998 40143872 7 HPFS/NTFS

__________________________________________________ ___________________

FSTAB PRINT-OUT

# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sda1 :
UUID=3e49d27a-02c8-4b9a-8968-90361e719c22 / ext3 relatime,errors=remount-ro 0 1
# Entry for /dev/sda5 :
UUID=76bca91d-2943-437d-9094-132275617d27 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0

FMDragon
August 12th, 2008, 11:41 PM
I've taken out the secondary drives and replaced them with one 80gb drive that Hardy picks up right away. I placed the 200gb drive in a usb enclosure but it still fails to pick up? Any advice?